I have a column with some cells containing just numbers, some cells containing numbers and letters and some cells containing just letters. I would like to know how to display just the cells that contain numbers only, without deleting any of the other cells.
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have a set of numbers:
Example:
2
3
5
6
7
8
9
1
Is there a formula that can display the top 3 numbers in that data set?
Expected results:
9
8
7
I have a very simple formula which is basically one cell minus another "=A1-B1".
When the values are equal, the cell this formula is in will display a zero. However, when the subtracted figure is greater than the first figure, i will then get a minus figure E.g. 10-11 = -1.
How can i make it that when the formula result is less than zero (i.e. a minus number) the figure displayed stays at zero but still using the minus funciton? Basically once it hits zero i need it to stop subtracting. This may be really simple but i cant figure it out.
I have some numbers in the cells A1:A50. All the numbers are between 1 and 12. Say if A1=5, B1 should be May, if A2=12, B2=December...
View 4 Replies View RelatedI have a sheet where one column has sequencial numbers from lowest to highest with some missing. So for example: A1 1, A2 3, A3 5, A4 6. Is there a formula that will display all the numbers that are missing from this column without skipping rows? So let's say: B1 2, B2 4 ect.
Basically I will be putting this on a different tab, so someone can go to that tab and see what numbers have not been used. It is a large range and is difficult for someone to scan through it all.
I need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers
View 14 Replies View RelatedI have a series of numbers going down from max to min in column M, in column N I have the number of counts of the same numbers.
The Modal value is calculated by a formula and already displayed in cell F3 (it needs no modification).
What I am trying to do is this:
1) Identify the address of the same modal value in column M.
2) From the modal values address in column M, search Column N searching upwards and downwards from the modal value address, until the first instance of the pre-specified count number is identified.
3) When the pre-specified count number is identified look beside in the cell in column M and display the value beside that pre-specified count in cell.
We stop at the first instance of that prespecified count both when 1) counting upwards and 2) counting downwards.
The upper value is displayed in F2 and the lower value is displayed in F4.
An example would be.
1 1
2 2
3 3
4 4
5 6
6 1
7 2
8 3
9 4
10 1
The modal value is 5 looking beside it as it has 6 counts, so in the count column we search upwards from the count of 6 until we encounter the pre-specified number of 4, then we look beside the count of 4 and observe that the number 4 above the modal value has 4 counts hence we display the number, now we search downwards from 6 counts until we reach the first instance of 4 we find it and the cell beside it contains the number 9 so we display the number 9.
The end result is numbers 4 and 9 that have 4 counts each.
If you have a formula lets say ( sum A1-A2) and the total is negative i.e. A1 is 100, A2 is 50 would return -50, how do you get the value to show a plus sign if the value is positive? i.e. if A2 is 100 and A1 is 50, excel would simply show 50, but I'd like it to show +50. Also, if the result is 0, so both A1 and A2 are 50, how do I get Excel to display the words On Forecast in a cell?
View 6 Replies View RelatedI would like to be able to enter numbers into a cell as a positive number, but have them actually display as negative in that cell.
View 2 Replies View RelatedIs it possible to remove the display of the leading zero in decimal numbers of less than one in Excel 2007?
View 3 Replies View RelatedK so basically i have a cell where based on the above formulas it displays a number.
What i want it to do is only display a number if it matches one of the numbers in the 9 cells above it. so for example
cell1:2
cell2:4
cell3:6
cell4:8
cell5:1
cell6:9
cell7:89
cell8:0
cell9: 11
and i want the number to display only if it is one of the numbers shwon above.
I want to show a date like 18-12-2008. This wil normal work with =()TODAY-356
But when I output text with this formula it will only show numbers:
="date "&TODAY()-365&""
I want to subtract 1 year of today.
I tried to set my cell to the date format but this did not work.
I'm looking for an answer about how I can show the numbers underlying a
nested IF function. The formula works fine, but I need to be able to show
how I arrived at the numbers that I did. Here is an example of one of the formulas:
=IF(B9=1,(B4*Data!G5*Data!F5),IF(Calculations!B10=2,(Calculations!B5*Data!G5*Data!F5),IF(Calculations!B11=3,(Calculations!B6*Data!G5*Data!F5),0)))
Instead of the reference to the cell, I would like the formula that the cell represents. I know that I could go through individually and pull each piece apart with control F9, but since there are numerous cells and because the data changes every time I create a new budget, it would help if I could have some way to display it all with one action.
I am trying to format my x-axis to list only the labels that have corresponding data points, but at the same time maintain appropriate number spacing. For example, My x-axis range is 0-90; however, I only want tick marks at 0, 5, 13, 40, 85.
View 4 Replies View RelatedI have developed some VBA code which produces a 'lucky number' using the RND function. The final number is produced by concatenating three individually generated random numbers between zero and 9. When the code is written in a Module, I can display each number as it is generated, by 'pausing' the macro with a For Next loop.
I have now developed a similar application using a MultiPage Userform, but the individual numbers are not displayed when I use exactly the same code. The only way I have found to display each number as it is generated is to use
Application.Wait
However the shortest wait time seems to be 1 second, which is too long. I would like to be able to make the MultiPage version look like the Module version.
I attach a workbook which shows both of the above.
dates column displays numbers even though the format in the format cell options is date format.
the number updates to date format only when i do F2 & enter for each cell. i've about 5000 cells with same problem. how cani do them all in a go instead of doing themone for a time.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I have a list of account numbers with stock attached to each account. I want to show all account numbers that do not have any one of 5 items attached to it. See my attached (simplified) example, show all accounts that dont have Bananas or Oranges, account number 222 and 444 would be displayed.
View 5 Replies View RelatedI'd like to create a macro to display the top 5 most frequently occurring repairs on sheet 3 of my workbook. I'd like the macro to analyse all the sheets in my workbook except for the first 3 and then output the results on the 3rd sheet from T50 onward. I have attached a template as an example of how all the sheets in the workbook look (excluding the first 3).
All the sheets have the same layout as the "Survey Template" worksheet.The repairs are located under the Log Book Review of Historical Structural Repair in the Survey Template worksheet and all the repairs are picked through a drop down list that is based on a table of repairs listed in the Parts and Prices sheet within the workbook. I have assigned random serial numbers to the repairs (if that makes it any easier to code instead of locating exact string matches).
ExampleSurveyTemplate.xlsx
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
Is there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100
200
300
400
100
Column B
400
200
300
100
500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
I also attached a excel.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedI have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
View 3 Replies View RelatedI want to delete rows in whole list and numbers of rows to be deleted I have in for example C column. How to do it?
View 9 Replies View RelatedIs it possible to delete a column of numbers then replace those numbers from adjacent columns and the adjacent columns are then filled with the numbers adjacent to them
View 9 Replies View RelatedI'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies View Related