I have 2 columns E and F that I am using, in Column E, I enter a time say 22:43:00, column F currently ads 15 minutes to what ever is in there with '=E3+TIME(0,15,0)' which is fine except if column E has no time in it when it automatically puts in 00:15:00, hov can I get the cell not to display anything in there is no value in column E.
View 2 RepliesI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
This also includes the WHITE sheet.
I have a problem with a time card i am producing. I want to count hours and minutes worked and carry forward any surplus or deficit into the next week. I can do it if the hours do not total more than 24. I have attached the file and it is formatted in 1904 format.
View 2 Replies View RelatedI have the =NOW() entered in to a cell on my excel dashboard. Is there a code or other method that I could use to refresh the time every second so that the current time is always visible.
View 3 Replies View Relatedhow to do that? In "mm:ss" format if possible
View 2 Replies View RelatedI have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
I am trying to format cells so when i type in 343 it will display as 3:43 like a clock, i have tried all the time formats and they all read back to me as 0:00 or as 12:00, is there a macro or a formula i am missing?
View 3 Replies View RelatedI am trying to find some simple code that will display elapsed time starting from execution of a macro to a certain point where a message box is displayed at which time the elapsed time should pause awaiting user interaction. Once the user has responded to the message box prompt the timer should continue on from its paused state ceasing at the end of the macro. I would also like the displayed box showing the timer to remain visible displaying minutes and seconds and continuously incrementing even though screen updating is turned off within the macro. (The macro switches sheets a number of times) and the elapsed time box needs to positioned at bottom left of screen.
View 5 Replies View RelatedI randomly created this spreadsheet as an example, but what I need is to display the start and end time to this sheet in a summary report format i.e.,
Location
(Date)
(Truck#) (Miles) (Stops) (Start time) (End Time)
etc...
etc...
The problem is that the table seems to always summarizes the time as well or it gives a count value of the time. If there is a better way or method to do this, I have open arms
I have a query that returns timestamps that looks likes these:
53425,114500,182834.
How can I display these numbers as AM/PM format?
I have one service level sheet where i used data in time format. I am getting error while using this sheet. I will just explain it in simple way...............
Please find below mentioned details.
Cell C D F
1 23:04 23:13 00:03
In cell G1 i have formula to get time difference between cell C1 and D1 and its give me difference between these both time as 00:09.
Formula is =IF(OR(ISBLANK(C1),ISBLANK(D1)),"",D1-C1)
In cell H1 i have formula to get difference time between cell C1 and F1.
Formula is =IF(OR(ISBLANK(C1),ISBLANK(F1)),"",F1-C1)
But in Cell H1 i am getting Error as Negative time or date display as ########
Is there anyway where i can get Exact time diffrence between Cell F1 and Cell C1
How to display following, that the day and month will apear in English, w/o relation to current regional settings:
Format( Date, "Long Date") & ", " & Time
I want to display on a spreadsheet, "last update date & time"; Is there a function to do it??
View 4 Replies View RelatedI have a date that is customised into dd-mmm-yy dddd eg 14-Aug-07 Tuesday in cell A1. I need help in formulating a formula to identify if the date in A1 is friday, to return "5:30 pm", else "6:00 pm" in cell B1.
View 5 Replies View RelatedI’m trying to program a specific label within a userform to continuously display the system time… I’ve tried to code something that loops while the userform.visibile property is true. This obviously just hangs the system… Is there an easier (or any other way) to do this?
View 7 Replies View Relatedwhy when pivot tables display individual or single time values they are rounded up or down. i.e. a value of 1:31.5 is displayed in the pivot table as 1:35.0 etc. I have tried custom formatting the table itself but to no avail.
View 3 Replies View RelatedI want to make a formula based on 2 times ex: 10:07:00 and 10:09:00. This formula should display "intime" if the diference between both is under 20 minutes, "outime" if the diference is above 20 minutes and it should display "error" if the time is under 0 minutes (this will only happen when someone makes a mistake typing in the time. For example 10:37:00 and 10:36:00)
View 3 Replies View Relatedif i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
Need to display time in total minutes but with a space after every 3 digits.
For instance, I can display 0.833333 as total minutes by using the custom number format [m] which displays 1200. But I need it to display as 1 200. I know with a standard number, I could use # ##0 but I don't know how to get both of these custom attributes to work simultaneously.
I'm creating a spreadsheet for anaesthesia monitoring. I have a table that calculates the time every 5 minutes (i.e. start time + 5 mins) for 3.5 hours and columns for heart rate, respiratory rate and drugs which is then plotted on a scatter graph. I've forced the major x-axis major unit to be 5 minutes.
Everything works fine for the first few values (1.JPG) then after 24 values it decides it wants to go crazy with the x-axis and display 24 hours (2.jpg) making everything unreadable. I would set the minimum manually but it obviously that will change depending on when the case starts. I can upload the file but it has some macros for other sections.
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies View RelatedCan i put into the cells B38-AF38, that would display the sum of B20:AF20 + B24:AF24 + B28:AF28 + B32:AF32 +B36:AF36 in a h:mm format.
When imputing the data into a cell in a h:mm format, I need it to display in that cell and formula bar the h:mm format without having to put an apostrophe in front of "h" or ":mm" value. Once complete, this form is going to go to other trainers to use on their computers and I dont think they would remember to keep putting an apostrophe before the data.
Example:
B20= 1:15 (1h15m) NOT 1:15:00 AM
B24= :30 (30min)
B28= :45 (45min)
B32= 1:45 (1h45m) NOT 1:45:00 AM
B38= 4:15 (4h15min)
I have attached a copy of the form for better clarification.
It doesnt seem to be complicated, but it's certainly a lot more than I thought.
I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
I'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies View RelatedI want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
if you could have a look at the attachment, what i am trying to do is in Cell E2, I would like it if B2 was between 22:00:00 and 06:00:00 for it to display a "N" for nights, if cell B2 was between 06:00:00 and 14:00:00 to display a "D" for days and between 14:00:00 and 22:00:00 to display an "A" for afternoons.
View 2 Replies View Relatedhow to get excel to display 0 instead of this? It pops up everywhere through my spreadsheet but cant get it to display 0.
View 14 Replies View RelatedIn an excel spread sheet I need to look at say cell D4 which is a time, I need cell F4 to be able to tell if the time is before or after 07:00:00 and display 'A' for <07:00:00 and 'B 'if >07:00:00.
I have been trying to do this for ages with out look, thought I may be able to do with conditional formating but keep getting nothing.