I have a series of numbers going down from max to min in column M, in column N I have the number of counts of the same numbers.
The Modal value is calculated by a formula and already displayed in cell F3 (it needs no modification).
What I am trying to do is this:
1) Identify the address of the same modal value in column M.
2) From the modal values address in column M, search Column N searching upwards and downwards from the modal value address, until the first instance of the pre-specified count number is identified.
3) When the pre-specified count number is identified look beside in the cell in column M and display the value beside that pre-specified count in cell.
We stop at the first instance of that prespecified count both when 1) counting upwards and 2) counting downwards.
The upper value is displayed in F2 and the lower value is displayed in F4.
An example would be.
1 1
2 2
3 3
4 4
5 6
6 1
7 2
8 3
9 4
10 1
The modal value is 5 looking beside it as it has 6 counts, so in the count column we search upwards from the count of 6 until we encounter the pre-specified number of 4, then we look beside the count of 4 and observe that the number 4 above the modal value has 4 counts hence we display the number, now we search downwards from 6 counts until we reach the first instance of 4 we find it and the cell beside it contains the number 9 so we display the number 9.
The end result is numbers 4 and 9 that have 4 counts each.
In Excel 2010, I have a list of numbers with about 7000 rows. I am trying to track the number of times the number "22" appears within 30-day periods, with the end-result being a "count column".
While I could enter a formula manually for the date ranges, there are over 200 time-spans I'd have to enter (list goes back to year 1994). Is there a way to automate this process...
Excel 2010ABCDE1DateNumbers List# of Days AgoCount for number 22205/31/12304305/30/12602405/29/12909505/28/12301202605/27/12391505705/26/12371807805/25/1222210 11905/24/123824051005/23/122227091105/22/123230011205/21/123533001305/20/12383608
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
I am trying to get a list which counts info based on multiple conditions but I can find no way round this one point
I have a sheet which has all the games played in a particular division and the time that each goal was scored and I am trying to break down the following
What I want is a list that has a column that has the result of how many times when team A were playing at home was a goal scored between the 45th and 65th minute
column A = Home Team B=Away Team C= Time of First goal D=Time of Second goal E=Time of Third etc
I have a countifs in place for counting the home team and counting if the first goal was scored in under 10 minutes (this is simple as obviously all the first goals are in column C) but what I want to do is be able to have a count of how many times a goal was scored between x number of minutes eg between 40-50.
My problem comes when trying to count the goal times as some matches will have no goals and the cells will be blank and others will have multiple cells filled and the figure I want could be in any column and I also only want it to count only the amount of games a goal was scored between those times so if a game had 3 goals scored in between that time I only want it to count 1.
The sheet has a lot more columns but this is the main sticking point.
I am trying to come up with a way of tracking our new hires and how many go to each solution, within a few orgs. I am given a list by HR and run a series of =countifs to break down the matrix. I have a fixed number of solutions, all to be counted within each of 4 orgs. Ultimately I want to have multiple columns within each of these orgs to represent our various start date cycles.
I am trying to figure out the easiest way to load each of 4 count column to the next empty column, within 4 columns in a new worksheet.
I'm trying to put together a year-over-year retention report, with amount spent by new customers and also by returning customers. I have 2014 data, and 2013 data. Data for each year is a list of orders, consisting of a company number along with the amount spent.
What it basically boils down to is a count of different companies that have placed orders in 2014, along with the same for 2013, and then of the different companies who have orders in 2014, how many also have orders on the books for 2013 and how many are new.
And as a next step, how much have the retained companies spent, and how much have the new companies spent.
As an added wrinkle, the company field can also include blanks.
I've included an example below of the data I'm working with, along with the result I'm looking to recreate with formulas.
I have a very simple formula which is basically one cell minus another "=A1-B1". When the values are equal, the cell this formula is in will display a zero. However, when the subtracted figure is greater than the first figure, i will then get a minus figure E.g. 10-11 = -1.
How can i make it that when the formula result is less than zero (i.e. a minus number) the figure displayed stays at zero but still using the minus funciton? Basically once it hits zero i need it to stop subtracting. This may be really simple but i cant figure it out.
I have a column with some cells containing just numbers, some cells containing numbers and letters and some cells containing just letters. I would like to know how to display just the cells that contain numbers only, without deleting any of the other cells.
I have a sheet where one column has sequencial numbers from lowest to highest with some missing. So for example: A1 1, A2 3, A3 5, A4 6. Is there a formula that will display all the numbers that are missing from this column without skipping rows? So let's say: B1 2, B2 4 ect.
Basically I will be putting this on a different tab, so someone can go to that tab and see what numbers have not been used. It is a large range and is difficult for someone to scan through it all.
I need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers
If you have a formula lets say ( sum A1-A2) and the total is negative i.e. A1 is 100, A2 is 50 would return -50, how do you get the value to show a plus sign if the value is positive? i.e. if A2 is 100 and A1 is 50, excel would simply show 50, but I'd like it to show +50. Also, if the result is 0, so both A1 and A2 are 50, how do I get Excel to display the words On Forecast in a cell?
I'm looking for an answer about how I can show the numbers underlying a nested IF function. The formula works fine, but I need to be able to show how I arrived at the numbers that I did. Here is an example of one of the formulas:
Instead of the reference to the cell, I would like the formula that the cell represents. I know that I could go through individually and pull each piece apart with control F9, but since there are numerous cells and because the data changes every time I create a new budget, it would help if I could have some way to display it all with one action.
I am trying to format my x-axis to list only the labels that have corresponding data points, but at the same time maintain appropriate number spacing. For example, My x-axis range is 0-90; however, I only want tick marks at 0, 5, 13, 40, 85.
I have developed some VBA code which produces a 'lucky number' using the RND function. The final number is produced by concatenating three individually generated random numbers between zero and 9. When the code is written in a Module, I can display each number as it is generated, by 'pausing' the macro with a For Next loop.
I have now developed a similar application using a MultiPage Userform, but the individual numbers are not displayed when I use exactly the same code. The only way I have found to display each number as it is generated is to use
Application.Wait
However the shortest wait time seems to be 1 second, which is too long. I would like to be able to make the MultiPage version look like the Module version.
I attach a workbook which shows both of the above.
dates column displays numbers even though the format in the format cell options is date format.
the number updates to date format only when i do F2 & enter for each cell. i've about 5000 cells with same problem. how cani do them all in a go instead of doing themone for a time.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a list of account numbers with stock attached to each account. I want to show all account numbers that do not have any one of 5 items attached to it. See my attached (simplified) example, show all accounts that dont have Bananas or Oranges, account number 222 and 444 would be displayed.
I'd like to create a macro to display the top 5 most frequently occurring repairs on sheet 3 of my workbook. I'd like the macro to analyse all the sheets in my workbook except for the first 3 and then output the results on the 3rd sheet from T50 onward. I have attached a template as an example of how all the sheets in the workbook look (excluding the first 3).
All the sheets have the same layout as the "Survey Template" worksheet.The repairs are located under the Log Book Review of Historical Structural Repair in the Survey Template worksheet and all the repairs are picked through a drop down list that is based on a table of repairs listed in the Parts and Prices sheet within the workbook. I have assigned random serial numbers to the repairs (if that makes it any easier to code instead of locating exact string matches).
I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100 200 300 400 100
Column B
400 200 300 100 500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
I have a list of numbers in sequential order. There are numbers missing. Is there a way to have Excel insert rows for the numbers that are missing in the series.