I need to compare a text box value to a dynamic range the value will be entered in upon a command button click. If the value matches a value within the range, then message box "Duplicate Item Found." Also, if the value is blank, then message box "Please Enter A Value." And finally if the value proves to be unique and not blank, then add the value to the range.
I want to do this on a command button click so that I can use the textbox with 2 other buttons: one to refresh the textbox to a blank value, and one to exit the form the textbox is located in.
Trying to enter dates across first column with userform. Must not enter same date twice. Need to searching row to skip entering the date from userform textbox if date is already there. Dates are in order but not sequential. I want to search for existing date before the following
Set LastCol = Sheet2. Range("jk1").End(xlToLeft) 'enter data on sheet2 LastCol.Offset(0, 1).Value = TextBox2.Value 'date Rows("1:1").Select ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Clear ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Add Key:=Range("b1"), _ SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal With ActiveWorkbook.Worksheets("Sheet2").sort .SetRange Range("b1:jk10000") . Header = xlNo .MatchCase = False .Orientation = xlLeftToRight .SortMethod = xlPinYin .Apply End With
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click() Dim rownum As Integer rownum = 2 'Prompt user with message box asking for input in both text boxes If Me.txtNumber = vbNullString Then response = MsgBox("Please enter a Work Number", vbInformation) Me.txtNumber.SetFocus Else ' Insert the work no., driver, locker, keys issued & keys On hand ActiveCell = Me.txtNumber.Value ActiveCell. Offset(0, 1) = Me.txtLocker.Value ActiveCell.Offset(0, 2) = Me.txtIssued.Value ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet A B C D colA colA,B colA,B,C colA,B,C,D 104 20 21 CR10600S 104 10420 1042021 1042021DUS 104 20 21 CR10600SX 104 10420 1042021 1042021DUS 104 20 21 CR10603S 104 10420 1042021 1042021DUS 104 20 21 CR10603SX 104 10420 1042021 1042021DUS 104 20 22 CR49605S 104 10420 1042022 1042022HKZ 104 20 22 CR49605SX 104 10420 1042022 1042022HKZ 104 20 23 CR39601P 104 10420 1042023 1042023SPR The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it. A B C D E F G STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE CR10600S Added 1042021 104 20 21 CR10600SX Added 1042022 104 20 22 CR10603S Added CR10603SX Added CR49605S Added CR49605SX Added CR39601P Needed Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
Here is a sample data, i am searching for text "home" against every airline among all countries and want to allocate home country to each airline (which is top row). Is there any formula which can do this?
AE - United_arab_emiratesAF - AfganistanAL - AlbaniaAM - ArmeniaAA - AMERICAN AIRLINES AwayAwayAwayAwayAAZ - AMERICAN AIRLINES C/S AA NON OAwayAwayAwayAway AB - AIR BERLIN GMBHAwayAwayAwayAwayABZ - AIR BERLIN PLC C/S NON AIR BERAwayAwayAwayAway
The code below loops thru a specified range I12:I26 for a duplicate combobox value in each cell. When I enter the same combobox value in range I43:I54 it still finds a duplicate.
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
Trying to figure out a VB Script but don't know where to start.
I have a sheet for each month. lets take September 2013
A Column with 200 Servers (A1:A200) on the Intranet listed as server-1/, Server-2/ Server-3 ... Server-200/ Each Server lists a location of a file for each day (31 columns per row)
I am trying to check for the existence of the files on each server (The Cells contain the URL and File Name in Range B2:AF201) starting with server-1 check the URL in B2 if it exists, go to C2, Continue with that row until the file check is False (The Page will show a 404 error) if not found delete cell url and continue. do this for all 200 rows
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a userform with text boxes. When I click on the GO button on the user form I want it to search from the TextBox to the range of rows on sheet2 from start to end and if duplicate entry is found it should display a message box.
For E.g. After pressing GO button Textbox entry should search Sheet2 (where all the data is entered) from the range starting from B6 to last entry of cell and if duplicate entry is found a message box appears. This entry keeps on getting updated and so it may increase or decrease, and therefore VBA should be such that it searches to the last entry.
I have the following code for a button on a form which is supposed to add the text entered into textbox1 of the form to the bottom of a range of cells and then sort that range of cells in 'A-Z'.
I have userform which shows days in month & populated Listbox for cell values. I want checkboxes to be ticked and Textbox to count when conditions are met, for each day. Range is, example (for 1st day) from E3:E318. My code so far is :
[Code] .....
So, When "MIN1" reaches value of 2, checkbox is ticked - If more than 2 then Msgbox ; When "MIN5", I want to be counted in Texbox ;
I have a userform that uses a text box to get the number of cards printed, as each card prints the card number increases from 1-the number inputed.
I need to make it so i can use the text box to enter a range of numbers, eg. 20-40 printing 20 cards with the numbers starting at 20 and increasing by one on each card. At the moment i use a for loop to start at 1 and step up 1 until the number of cards entered prints, I'm not sure how to get the bounds from the text box to be able to print how i want.
My code is at the moment this,
For intindex = 1 To UserForm.textbox.Value Step 1 For x = 1 To UserForm.Gradelist.ListCount Worksheets("placards").Range("TonN" & x).Value = intindex Worksheets("placards").Range("A_B" & x).Value = "" Application.Refresh = True Next x Worksheets("placards").PrintOut From:=page, to:=page, Copies:=1 Next intindex
I have a user form that has a combobox, two textboxes, and a button on it. When the form is loaded, the combobox fills with data from a worksheet I created. THe worksheet has a column with the item names, and another column with the quanity of each item. The combobox is filled with the item names. SO far I have this done. My issue is that when the user selects an item from the combobox, and enters a quantity in to the first textbox, and then clicks the button, I want the quantity in the textbox to add to the quantity cell that the part number from the combobox references to. Then I want this new quantity to show in the cell and the second textbox.
I am trying to have a macro to take a value from a text box and see if it is matches a value that is in a specified range. If it comes back true then it shows an error message. This code is working for text values, but if it is numeric it will not find find it.
Sub SearchForMatch() 'Procedure level declarations Dim rngCell As Range Dim bMatch As Boolean ' Loop through each cell in the nominated range For Each rngCell In Range("B4:B50") 'If there us a matching value then set your 'boolean flag to true and exit the loop If rngCell.Value = TextBox1.Value Then bMatch = True Exit For End If
Next 'If a match was found then alert the user If bMatch Then MsgBox ("Name already exsists.") End Sub
I have a userform with multiple textboxes and comboboxes, the contents of which are saved to a database sheet, each time on a new row. Everything else is now all set but I still need to create a unique id number for each entry. I set the value of the textbox in question to the last cell value in the id column incremented by 1 in the userform_initialize but for some odd reason it doesn't work. However, if I use a direct reference to a cell it does work. Here's my Private Sub UserForm_Initialize()
it is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
How do I copy a string from a userform1 textbox called 'Code' to cell range A1 to AX where X is a number that I enter into another textbox called 'lightcount' on userform2?
I've done define name to read column C until G in 1st row, N define another name from column C until G in 2nd row.For example; NameRanges for "Year" =OFFSET(Sheet2!$C$1,0,0,1,COUNTA(Sheet2!$1:$1)-2), for "Thickness" = OFFSET(Sheet2!$C$2,0,0,1,COUNTA(Sheet2!$2:$2)-3)
I want to display list of year in combobox and then, when the user click on the first item in combobox, the textbox will display the value that correspond to the combobox. For example; when the user click Year = 1990 in the combobox, the textbox will take value from excel and display thickness for year 1990 which is 4.
This is my code, the code in UserForm_Initialize is working. unfortunately, coding to display value in TextBox1, doesnt work.
I created a user form that has two textboxes on it. One is to enter a person's name that gets put into column A, starting at row 4, and the other is to enter a number into column B, starting at row 4.
What I would like to do is for the form to search the names that have been entered in column A for duplicates in the same range. If the name is not there already, then I would like it to operate as normal. If it already exists, then I would like the number in the text box to go into column C in the same row as the name.
Here is the code I have already on the Submit button:
Private Sub SubmitButton_click()
Dim emptyRow As Long Sheet1.Activate emptyRow = WorksheetFunction.CountA(Range("A:A")) + 4 Cells(emptyRow, 1).Value = Guestname.Value Cells(emptyRow, 2).Value = Roomnum.Value Unload Name_usrfrm End Sub
Is this possible? I have to make it more complicated, but once I get the basics, I might be able to figure it out myself.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
I run a workbook an I want to save it by it's date. In Simple word : If the workbook did'nt exist save it, or it's already exist.
Sub SaveWorkbook() Dim strFile As String Dim FileName As String Dim year As String FileName = "Sales" year = Sheets("Values"). Range("G2").Value strFile = FileName & year ' For Example: Sales2007 ChDir "C:Sales" If Dir(strFile) = "" Then ActiveWorkbook.SaveAs FileName:=strFile, FileFormat:=xlNormal Else ' Don't Accept saving and exit sub. MsgBox "File already exist " & strFile, vbInformation Exit Sub End If End Sub
