Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
I am using a spreadsheet as a score sheet for a competition. One of the columns is the student's GPA. After entering all the scores there are duplicate final scores. I need a way to have it look at the final score and then use the GPA so that it will not put a duplicate value in the final column.
al Column N is the Total Column, Column O has the Names that correspond to the Total Column. Currently I am taking this total and putting it into Column Q (High Scores) in high to low order. Column R should have the names that match the scores. But with duplicate scores, it is only putting the first name associated with the score. I would like to use the GPA as a final determining factor for the duplicate scores. The higher GPA would come before a lower GPA. I have tried to put an additional column to bring the GPA over to correspond with the High Scores Column, but could not get it to work.There are actually more names for the competition and the top 10 will be moved to a different sheet and further judged. I have attached a sample with the exact formulas that I am using.
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
Trying to figure out a VB Script but don't know where to start.
I have a sheet for each month. lets take September 2013
A Column with 200 Servers (A1:A200) on the Intranet listed as server-1/, Server-2/ Server-3 ... Server-200/ Each Server lists a location of a file for each day (31 columns per row)
I am trying to check for the existence of the files on each server (The Cells contain the URL and File Name in Range B2:AF201) starting with server-1 check the URL in B2 if it exists, go to C2, Continue with that row until the file check is False (The Page will show a 404 error) if not found delete cell url and continue. do this for all 200 rows
Using VBA, I am running code that filters the data in my column "Account" on my main sheet, creates a new sheet for each account in that column then copies the filtered data to the new sheet. There will always be the same list of Accounts with the exception that there might not be data for one or more.
In that case, I still need it to create a new sheet with the account name but just have some text stating "no data available for his account".
I can find code to search if a specific sheet name exists but, in my case, I don't know which one won't have data at run time.
I was hoping I could put a static list of the expected sheet names into an array and loop through that list and create the sheet for any that it can't find.
I have two workbooks open, the first is a summary, the second has new data that needs transferring into the summary. Before transferring the data I need to check that 10 specific sheets exist in the file with the new data.
I have found some code that checks for one sheet name, but really need to check for 10 specific names, if any are missing then I need a message to appear, listing the missing ones and stopping the macro from proceeding,
Dim mySheetName As String, mySheetNameTest As String ActiveWindow.ActivateNext mySheetName = "Data" On Error Resume Next mySheetNameTest = Worksheets(mySheetName).Name If Err.Number = 0 Then
I've set a range as DD14 to G014, then using a For Next Loop asked the program to cycle through each cell in the range. Upon findng a populated cell, it stores several bits of data from that cell (already done) and then move up one cell to record the cell value (time) and again move one cell up to record the date.
Now I did get this to work using a clunky bit of code that used activecell.offset to move the focus up the two columns and a While .... Wend loop - but using a set range and cycling through each cell it does not appear to be possible - or am I wrong?
Set MyRange(1) = Range("D14:ER14") Set MyRange(2) = Range("D23:GN23") For MyCounter = 1 To 2 For Each Cell In MyRange(MyCounter) If Cell.Value = "" Then Goto Skip_Cell MyCell = Cell.Address MyPosition = InStr(1, Cell.Value, ",") If MyPosition = 0 And Len(Cell.Value) >= 3 Then Tool_Number = Left(Cell.Value, 3).....................
It checks to see if DataImport2, 3 and 4 exist and then executes code.
Currently DataImport4 does not exist so it should not execute anycode but for some reason the code is still trying to execute it and select Sheets("DataImport4").Select
I wrote a macro that selects 3 charts existing in a sheet and sets the axes to auto scale option. The charts are labeled Chart 2, Chart 6 and Chart 7 by default, the macro selects each of then and then sets the auto scale option.
Is it possible to use 'If then' statement to check if the chart object exists ? In case they do exist then macro works on them but if not then it goes to the next statement.
Or is there any other way to check if objects exists or not, because sometimes the macro is used for old files (template) and the chart objects there have different numbers and not 2, 6 and 7. So to use macro for both templates( new and old) its better to check first. This way the macro becomes more flexible.
I would like to check/search if (FileName As String) is still exists in its directory. --Why as string: because I have a hidden kollom where the links to the files are in txt format.--
I am using below mentioned Code for checking if certain file exist on Path. Its working on my home PC (XP SP2 Excel 2003). BUT its not working on my office PC (XP SP2 Excel 2003).
Can somebody tell me why its not working in my office PC ( or if its missing something, then from where can i download it.)
Sub CheckFiles() Const strFolder = "C:Documents and SettingskreshnrDesktopTest" Dim fso, msg, i Dim rngData As Range
Set fso = CreateObject("Scripting.FileSystemObject") Set rngData = Sheets("Sheet1").Range("A1")
With rngData Do While .Offset(i, 0).Value "" If (fso.FileExists(strFolder & .Offset(i, 0).Value & ". ")) Then .Offset(i, 2).Value = "Yes" Else .Offset(i, 2).Value = "No" End If i = i + 1 Loop End With End Sub
finding the proper code (which will exist in a larger macros) to check to see if specific worksheets exist. Have looked at functions, Cases, On Error checks and nothing seems to do the job I need it too. Here's what I'm loooking at doing...
Background: Main job of macros is to open a source file and systematically copy and paste data from several specific sheets (8 out of 15) into 'like' sheets in a destination file. Destination file is where the macros is run from.
Before starting any copying or pasting I want to make sure the source file has all the correct worksheets. I've run into cases where users have either deleted or renamed worksheets and as a result my consolidation macros falls down. So the order of operations at the beginning of my macros would be...
- Open source file - Check to make sure worksheets with proper names exist - If they do exist, continue with macros - If even one worksheet can't be found (either deleted, or renamed), then prompt user to check the source file and then stop the program.
I need to allow users to add up to seven new worksheets as required and the new sheets must be named Image1, Image2, etc. I do not want to add seven worksheets at once, only one at a time as the need arises and no new ws can be allowed after Image7 ws is added.
I have a macro to test for the existence of ws Image1, but need help on further development to add and test for the extence of the remaining sheets.
Dim ws As Worksheet Dim bTest As Boolean For Each ws In Worksheets If ws.Name = "Image1" Then bTest = True Exit For End If Next ws
If bTest = True Then 'Need some code here, not sure what I need
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code: Sub Tester()
Dim WB As Workbook Dim WS As Worksheets Dim modCounter As Long Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm") Set WS = WB.Sheets(BM18)
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
I have a function that works well for checking if a specified file exist within a specified path. I realized I do not know how to just check if the folder exist!
Example: I want to see if the following folder exist with boolean response...
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Adding some additional code to prevent someone from saving the workbook under a different name. Currently if someone tried to enter data after the allotted time period, it would allow them to in any "unlocked" cells. When exiting or trying to save the file with this new data, they will get a message stating something to the effect that this is a read only file would you like to save as another name, which would allow the user to circumvent what I'm trying to accomplish. The end result would be they'd need a new spreadsheet.
At the moment I have 2 columns, A1:A5 and B1:B5. Normally A1:A5 and B1:B5 are all 0's. Every 5 minutes numbers will show up in column B and I do a procedure outside excel(feedback of DDE's) and they all go back to 0. Now sometimes the cells in A1:A5 are not all 0 after the numbers show up in B1:B5. I can reset A1:A5 to 0 with a macro button. I already built that macro, lets call that macro 'Mike'. So now I have to press that macro button every time when B1:B5 are showing zero's after the procedure and A1:A5 are not showing 0's. Is there a way a macro can constantly check if A1:A5 is non zero and B1:B5 is zero that the macro Mike is called?
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
I have a column that I want to check if a column contains any instances of particular values. If any are present I want it to return a 1, if not then return a zero.
What I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
I need to count the amount of unique values in a range, but only count unique values that also have a seperate condition. To illustrate with the 2 column dataset below....
Colour Letter Yellow A Yellow A Green B Yellow B Blue A Blue A Yellow C
For this set of data i want 3 seperate cells for each 'Letter' telling me that, for 'A', the answer is 2 unique values (i.e. Yellow and Blue). For 'B' there is also 2 unique values (i.e. Green and Yellow) and finally for 'C' there is just 1 unique value (i.e. yellow).
I run a workbook an I want to save it by it's date. In Simple word : If the workbook did'nt exist save it, or it's already exist.
Sub SaveWorkbook() Dim strFile As String Dim FileName As String Dim year As String FileName = "Sales" year = Sheets("Values"). Range("G2").Value strFile = FileName & year ' For Example: Sales2007 ChDir "C:Sales" If Dir(strFile) = "" Then ActiveWorkbook.SaveAs FileName:=strFile, FileFormat:=xlNormal Else ' Don't Accept saving and exit sub. MsgBox "File already exist " & strFile, vbInformation Exit Sub End If End Sub
I am looking for a macro that will check 2 things....then do something. The first is if a range of cell values in are blank. lets say Sheets("Sheet1").Range("D6:G48").
Next is if a particular cell contains a given value , Sheets("sheet1").Range("E5") should equal "Year 1" if true.
If both these are true then I want the macro to copy a range of cells from Sheets("Sheet2").Range("H6:H48") to Sheets("Sheet1").Range("D6:D48").
I tried to use IsEmpty but it seems to return a "False" if a range of cells are being tested.
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
I created a new workbook that contains a list of additional design requirements than our old checklist. These requirements are answered by placing a 1, 0 or .5 in the cell next to the requirement (1 = yes, 0 = no and .5 for half credit). I can't simply go to the old workbook/worksheet and copy the results into the new workbook/worksheet as the rows of requirements don't match up since some requirmements have been deleted and new ones added between the old and new checklists. I created a command button in the new checklist and what I want it to do is: - open a dialog box that lets me select the old checklist file (these are all excel files, but with different names). - go the the proper worksheet in the old file (DFT Checklist) and copy a column of results from the old checklist ("DFT Checklist" worksheet) and paste them into the proper cells of the new checklist ("DFT Checklist" worksheet). - The macro would know (i'll have to tell it) which requirements and cells are still valid answers between the old checklist and the new one. It would disregard requirements that are no longer in the new checklist. - Once complete, it would close the old checklist without saving.
