I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
View 8 RepliesThis is Excel 2010 on Windows 7
Trying to figure out a VB Script but don't know where to start.
I have a sheet for each month. lets take September 2013
A Column with 200 Servers (A1:A200) on the Intranet listed as server-1/, Server-2/ Server-3 ... Server-200/
Each Server lists a location of a file for each day (31 columns per row)
I am trying to check for the existence of the files on each server (The Cells contain the URL and File Name in Range B2:AF201) starting with server-1 check the URL in B2 if it exists, go to C2, Continue with that row until the file check is False (The Page will show a 404 error) if not found delete cell url and continue. do this for all 200 rows
I need to allow users to add up to seven new worksheets as required and the new sheets must be named Image1, Image2, etc. I do not want to add seven worksheets at once, only one at a time as the need arises and no new ws can be allowed after Image7 ws is added.
I have a macro to test for the existence of ws Image1, but need help on further development to add and test for the extence of the remaining sheets.
Dim ws As Worksheet
Dim bTest As Boolean
For Each ws In Worksheets
If ws.Name = "Image1" Then
bTest = True
Exit For
End If
Next ws
If bTest = True Then
'Need some code here, not sure what I need
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
When I type numbers in the cells from D4 to D14, E4 to E14 and so on, the particular cell should turn into "Green". All the the cells will remain "yellow" and blank until numbers are entered based on the daily cleaning of machines. When particular machine no is entered in to a cell cell, that cell should turn green(this shows that "service is done for that machine")
View 2 Replies View RelatedWe have a simple holidays workbook, with seperate sheet tabs for each member of staff in the department to note down there holidays in a calendar.
The 1st row (from B1 and onwards) contains the day numbers of the month, ie. 1 - 31
The 1st column (A2 downwards) shows the 12 months of the year.
The holidays are then marked in the relevant cell matching the dates required. The codes we use are F (full day), A (morning), and P (afternoon). A countif adds up all the occurences of the various codes and totals the ammount of used/remaining days.
Hopefully that drew a picture.
The problem is, each sheet only shows the holidays marked down for that person. There is no way of checking for a "clash" (ie. 1 member of staff off on the same day as another) without flicking to the other sheets and checking yourself.
how can I get a cell shading to automatically show up on the sheets, if there is a holiday noted down (ie a value, A, P or F) in one of the other sheets?
I would like to know if it is possible to use a wilcard in an IF/THEN statement. For example, in Cell A1 I have 1234, in Cell A2 I have 9934, in Cell A3 I have 8346659. I want to build an IF/THEN statement in Cells B1, B2 and B3 whereby it looks at cells A1, A2 and A3 appropriately and where ever it finds a "34" anywhere in the cell it gives me a "YES" or "NO" reply.
View 3 Replies View RelatedIt checks to see if DataImport2, 3 and 4 exist and then executes code.
Currently DataImport4 does not exist so it should not execute anycode but for some reason the code is still trying to execute it and select Sheets("DataImport4").Select
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
I wrote a macro that selects 3 charts existing in a sheet and sets the axes to auto scale option. The charts are labeled Chart 2, Chart 6 and Chart 7 by default, the macro selects each of then and then sets the auto scale option.
Is it possible to use 'If then' statement to check if the chart object exists ? In case they do exist then macro works on them but if not then it goes to the next statement.
Or is there any other way to check if objects exists or not, because sometimes the macro is used for old files (template) and the chart objects there have different numbers and not 2, 6 and 7. So to use macro for both templates( new and old) its better to check first. This way the macro becomes more flexible.
I would like to check/search if (FileName As String) is still exists in its directory.
--Why as string: because I have a hidden kollom where the links to the files are in txt format.--
I can't write VBA But maybe I can sketch it?
I am using below mentioned Code for checking if certain file exist on Path.
Its working on my home PC (XP SP2 Excel 2003).
BUT its not working on my office PC (XP SP2 Excel 2003).
Can somebody tell me why its not working in my office PC ( or if its missing something, then from where can i download it.)
Sub CheckFiles()
Const strFolder = "C:Documents and SettingskreshnrDesktopTest"
Dim fso, msg, i
Dim rngData As Range
Set fso = CreateObject("Scripting.FileSystemObject")
Set rngData = Sheets("Sheet1").Range("A1")
With rngData
Do While .Offset(i, 0).Value ""
If (fso.FileExists(strFolder & .Offset(i, 0).Value & ". ")) Then
.Offset(i, 2).Value = "Yes"
Else
.Offset(i, 2).Value = "No"
End If
i = i + 1
Loop
End With
End Sub
finding the proper code (which will exist in a larger macros) to check to see if specific worksheets exist. Have looked at functions, Cases, On Error checks and nothing seems to do the job I need it too. Here's what I'm loooking at doing...
Background: Main job of macros is to open a source file and systematically copy and paste data from several specific sheets (8 out of 15) into 'like' sheets in a destination file. Destination file is where the macros is run from.
Before starting any copying or pasting I want to make sure the source file has all the correct worksheets. I've run into cases where users have either deleted or renamed worksheets and as a result my consolidation macros falls down. So the order of operations at the beginning of my macros would be...
- Open source file
- Check to make sure worksheets with proper names exist
- If they do exist, continue with macros
- If even one worksheet can't be found (either deleted, or renamed), then prompt user to check the source file and then stop the program.
I have text in Q2:Q30 this text is spread out in N2:N500
then i have Numbers in K2:K500
what i would like to do is to
find Q2 in N2:N500 (can be there many times) and add numbers from K2:K500 where found into R2
example Q2 is Denmark
I have Denmark in N40, N60, N490
Now in R2 i would like to add K40 + K60 + K490
i have started with this
=IF(ISNUMBER(MATCH(Q2,$N$2:$N$500,0)),SUM but now i`m stuck
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
Using VBA, I am running code that filters the data in my column "Account" on my main sheet, creates a new sheet for each account in that column then copies the filtered data to the new sheet. There will always be the same list of Accounts with the exception that there might not be data for one or more.
In that case, I still need it to create a new sheet with the account name but just have some text stating "no data available for his account".
I can find code to search if a specific sheet name exists but, in my case, I don't know which one won't have data at run time.
I was hoping I could put a static list of the expected sheet names into an array and loop through that list and create the sheet for any that it can't find.
My list: FTL, DTB, CAR, BLD, RSG, STS
I have two workbooks open, the first is a summary, the second has new data that needs transferring into the summary. Before transferring the data I need to check that 10 specific sheets exist in the file with the new data.
I have found some code that checks for one sheet name, but really need to check for 10 specific names, if any are missing then I need a message to appear, listing the missing ones and stopping the macro from proceeding,
Dim mySheetName As String, mySheetNameTest As String
ActiveWindow.ActivateNext
mySheetName = "Data"
On Error Resume Next
mySheetNameTest = Worksheets(mySheetName).Name
If Err.Number = 0 Then
[code].....
I have a function that works well for checking if a specified file exist within a specified path. I realized I do not know how to just check if the folder exist!
Example: I want to see if the following folder exist with boolean response...
"C:MyCompanyMyDeptMyFolder"
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
I need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View RelatedI need a formula that can automatically populate yearly quarters in separate columns based on a number of years. So if I put in 5 years - excel would populate 20 columns with Quarter 1 - Quarter 2 and so on. If I then change it to 3 years it would only populate 12 columns.
View 4 Replies View RelatedWhat i'm trying to do is to check a large number of cells, if "0" is written down in that cell it stays as it is and if the number is different from "0" i want to put a "1" instead.
View 5 Replies View RelatedPlease see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls‎
Using VBA, I randomly input values in A1: C1 and it will show total sum in D1. It will be range
("D1")= "=sum(A1:C1)".
Question is how do I apply same method to the rows below without typing range
("D2")= "=sum(A2:C2)", range("D3") = "=sum(A3:C3)" and list goes on.
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies View RelatedI am using the code below tied to a button on the worksheet to email a sheet and would like it to check that there has been text entered intothe cells below prior to emailing the sheet. If the cells have no text entered i would like a message box to pop up stating that all fields need to be completed.
Range of cells:
H6,A9,F9,A12,F12,A16,A23,A26,C28,D30,D32,D34,A37,D39,F36,F28
Email code I am using:
I have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies View RelatedThis does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If