Trying to enter dates across first column with userform. Must not enter same date twice. Need to searching row to skip entering the date from userform textbox if date is already there. Dates are in order but not sequential. I want to search for existing date before the following
Set LastCol = Sheet2. Range("jk1").End(xlToLeft) 'enter data on sheet2
LastCol.Offset(0, 1).Value = TextBox2.Value 'date
Rows("1:1").Select
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Add Key:=Range("b1"), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With ActiveWorkbook.Worksheets("Sheet2").sort
.SetRange Range("b1:jk10000")
. Header = xlNo
.MatchCase = False
.Orientation = xlLeftToRight
.SortMethod = xlPinYin
.Apply
End With
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click() Dim rownum As Integer rownum = 2 'Prompt user with message box asking for input in both text boxes If Me.txtNumber = vbNullString Then response = MsgBox("Please enter a Work Number", vbInformation) Me.txtNumber.SetFocus Else ' Insert the work no., driver, locker, keys issued & keys On hand ActiveCell = Me.txtNumber.Value ActiveCell. Offset(0, 1) = Me.txtLocker.Value ActiveCell.Offset(0, 2) = Me.txtIssued.Value ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I need to compare a text box value to a dynamic range the value will be entered in upon a command button click. If the value matches a value within the range, then message box "Duplicate Item Found." Also, if the value is blank, then message box "Please Enter A Value." And finally if the value proves to be unique and not blank, then add the value to the range.
I want to do this on a command button click so that I can use the textbox with 2 other buttons: one to refresh the textbox to a blank value, and one to exit the form the textbox is located in.
I have five text boxes on a user form. I would like the 5th box to always equal 100 - the Sum of the other boxes, and never go below 0.
In other words, the text boxes are representing percentage breakdowns - so to validate the percentage entry in each box i want the last box to 'count down' from 100 as the percentages are distributed amoungst the other boxes. This box will also be a percentage figure, so is crucial it has its own box (rather than just saying these four boxes have to total 100) i hope this makes sense!
I have tried a code along these lines (see below) - (adapted from this forum but couldnt get it to work) I also found a version where one poster used a command to change the 'value' from string to numbers - but have been unable to find that again.
Private Sub txtbox1.change() txtbox5 = 100 - (CCur(txtbox1) + CCur(txtbox2) + CCur(txtbox3) + CCur(txtbox4)) End Sub
I'm using the following code to try to ensure a value is entered into a text box, but when I click over to the next text box skipping the first one entirely, I don't receive any message indicating the previous box is empty. I'm trying to make it so certain fields are required and others are optional. Here's the code I'm currently using:
When a user inputs a month and then a day, I want to be able to check to make sure that the day entered is possible in that given month. Is there a way to do that which is not too complicated?
I have a range Named "MyRange" which consists of cells "A4:H20". What I am attempting to do is when the user goes to save and or close the workbook it checks that all the cells within the range have been filled with data.
I have a range B1:B20. These cells are populated by the user and I want to ensure that no two entries are the same. Is there a way of presenting a dialog box that prompts the user to enter a different value if the value they are trying to enter is already entered somewhere in the range?
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Len(Range("E18:E34")) = 0 Then MsgBox "You must complete cell E18 thru E34 before you can save this file!" Cencel = True End If
I am trying to set a range of cells to ensure they are completed before the file can be saved. I can get it to work with individual cells, but not when I use multiple cells like in the example above.
This Works fine:
If Len(Range("D5")) = 0 Then MsgBox "You must enter the Impress Amount before you can save this file!" Cancel = True End If
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet A B C D colA colA,B colA,B,C colA,B,C,D 104 20 21 CR10600S 104 10420 1042021 1042021DUS 104 20 21 CR10600SX 104 10420 1042021 1042021DUS 104 20 21 CR10603S 104 10420 1042021 1042021DUS 104 20 21 CR10603SX 104 10420 1042021 1042021DUS 104 20 22 CR49605S 104 10420 1042022 1042022HKZ 104 20 22 CR49605SX 104 10420 1042022 1042022HKZ 104 20 23 CR39601P 104 10420 1042023 1042023SPR The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it. A B C D E F G STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE CR10600S Added 1042021 104 20 21 CR10600SX Added 1042022 104 20 22 CR10603S Added CR10603SX Added CR49605S Added CR49605SX Added CR39601P Needed Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
Here is a sample data, i am searching for text "home" against every airline among all countries and want to allocate home country to each airline (which is top row). Is there any formula which can do this?
AE - United_arab_emiratesAF - AfganistanAL - AlbaniaAM - ArmeniaAA - AMERICAN AIRLINES AwayAwayAwayAwayAAZ - AMERICAN AIRLINES C/S AA NON OAwayAwayAwayAway AB - AIR BERLIN GMBHAwayAwayAwayAwayABZ - AIR BERLIN PLC C/S NON AIR BERAwayAwayAwayAway
The code below loops thru a specified range I12:I26 for a duplicate combobox value in each cell. When I enter the same combobox value in range I43:I54 it still finds a duplicate.
I am trying to set up a data validation to ensure that when a user enters a number in column A that matches a previously entered number in column A, the user is only allowed to enter the same date for the number it matches in column B.
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
Trying to figure out a VB Script but don't know where to start.
I have a sheet for each month. lets take September 2013
A Column with 200 Servers (A1:A200) on the Intranet listed as server-1/, Server-2/ Server-3 ... Server-200/ Each Server lists a location of a file for each day (31 columns per row)
I am trying to check for the existence of the files on each server (The Cells contain the URL and File Name in Range B2:AF201) starting with server-1 check the URL in B2 if it exists, go to C2, Continue with that row until the file check is False (The Page will show a 404 error) if not found delete cell url and continue. do this for all 200 rows
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a text box in which date will be entered. I am using the following code to validate and format the date.
Code: Private Sub txtTDate_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean) If IsDate(txtTDate.Value) Or txtTDate.Value > Date Then sDate = DateSerial(Year(Date), Month(Date), Day(Date))
[Code]...
I expected it to return error if the date entered is less than Current(System's) date. This is not working.
I am trying to validate two things for one TextBox and they somehow contradict each other:
Private Sub UserForm_Initialize() TextBox_today.Value = Date TextBox_today.Text = Format(TextBox_today.Text, "dd mmm yy") End Sub
Private Sub TextBox_expiry_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean) With Me.TextBox_expiry If IsDate(.Text) Then .Text = Format(.Text, "dd mmm yy") Me.Label_expiry.Caption = "expiry as date:" Else Cancel = True.................................
Also, what other date formats I could use besides "dd mmm yy?"
I have a userform with 5 textboxes. Each textbox looks for certain kinds of user entry...my code has trouble in re-locating the cursor to the SAME textbox after rejecting the user entry. And BTW, ideally the text box would be highlited in this instance.
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean) Dim okstop As Boolean Dim yesno_continue As Boolean Dim mytext As String okstop = False Do TextBox2.SetFocus TextBox2.SelStart = 0 mytext = TextBox2.Value If Not IsDate(mytext) And mytext <> "" Then TextBox2.Value = "" yesno_continue = MsgBox("Please enter a date...try again?", vbYesNo) TextBox2.SetFocus Else okstop = True End If Loop Until (yesno_continue = vbNo) Or (okstop = True) End Sub
In my Excel VBA user form, there are multiple instances of the MS DTPicker control, which feed multiple text boxes. These in turn are linked to named cells on an worksheet. Note at this stage please that dates will not always be required, hence the text boxes. Only the button on the DTP controls are visible, alongside the related textbox.
My problem is that the values in the cells are in US date format and I need them to be recognised in the UK date format. The dates therein must be formatted as dates (ie not as text), as they are used throughout other worksheets for calculations. In the sample below, DTPickerDateOfIncorporation is the named cell (the control source). I know from Roy's responses to other questions on the DTPicker that he doesn't use it - is there a better alternative?
I have userform In that Twotextbox Need to be Pickdate from Popupcalender..while placing cursor on Textbox1 and textbox2 it popup shows Pickupcalender.... I tried with different code still failed
Go to sheet Repor Wizard Form ,Click Report filter & Export cmd button
I need to confirm that a date is entered correctly into a userform.
This code works for a command button, but not for a WorkSheet_Change event.
My textbox is the first in the userform, and needs to be checked immediately, as the labels in the rest of the userform all change to reflect the date that was entered.
What is the best way to do this? I tried a keycode = vbKeyReturn option, but cannot get it to work?
Code: Private Sub DateCheck() Dim DateString As String Dim DateProper As Date Dim EntryOK As Boolean EntryOK = False
