Creating Dynamic Top 10 List And Ignoring Duplicates?
Apr 23, 2014
I have a list of names and an associating number with those names. I'd like to create a dynamic top 10 list, but my problem is that I have duplicate values, here's a sample:
[Code].....
I tried to use LARGE and INDEX to create a top ten list like this:
=LARGE(Names,ROW(1:10))
=INDEX(Names,MATCH(T2,Count,0),1)
But, when the list comes out, it shows only the first entry with a duplicate result:
[Code] ....
How I can get it to grab the second "Name" with the same value as the first?
View 6 Replies
ADVERTISEMENT
May 6, 2008
I have a large list of items and have set up some dynamic drop down lists but need to know if/how to make these lists only show each item once and therefore ignore any duplicates.
View 9 Replies
View Related
Jan 19, 2014
I have attached a sample of what im trying to do here.
A2:A10 i have items, B2:B10 they can selected "yes" or "no" and C2:C10 the values
What I would like is, is "yes" was selected, i would like the item name added to a list. so basically:
=IF(A2:A10="YES",A2:A10)
And then I can just add the value to each item later but I need to remove duplicates and obv have this carried throughout the cells.
Attached File: TEST.xlsx
View 10 Replies
View Related
Mar 28, 2013
Currently I have a spreadsheet with the following columns.
A - company name
B - Company expense date
C - company expense amount
There are many different companies, and each company has multiple rows for different expenses.
How would I create a drop down box, where I can select the company name and have excel create a list of all the expense amounts for that company?
View 3 Replies
View Related
Apr 23, 2014
I have a combo box with a list of vendors. The problem is that a vendor can appear more than once. The list of vendors is dynamic so new vendors can be added and still appear in the combo box but how can I get the combox box list to only recognize the vendor name once so I don't have multiple duplicate vendors showing in the list?
View 9 Replies
View Related
Dec 12, 2011
I have conditional formatting set to hilight duplicates, but I a, wonder if there is a way to exclude special characters (in this case specifically dashes).
View 5 Replies
View Related
Oct 7, 2008
I used each of the following codes for dynamic name ranges.
View 4 Replies
View Related
Feb 13, 2013
I need to create a dynamic list from a table of data.
I have performance data for 110 different pumps. Data points are generated every hour, and the table is updated with new data periodically. I want to automate the population of a list of 6 different pumps, and specify the date range populated. To put it another way: I want to place data from Pumps 1 through 6 for all of November into Columns A through F. Then I want to clear that data, and show data for Pumps 105-110 for last week in those same Columns.
One of the main goals of doing this -- other than quickly narrowing a field of data -- is being able to quickly chart this data on a scatter plot with a custom format. The pumps are grouped together by region, and individual pumps have specific purposes. So I need to quickly generate graphs with a series' color scheme or formatting that is consistent and logical between different pumping regions.
I haven't been able to make pivot table work because of the graphing issue, and also because of the way it handles data points and presents data. I would like to make this work with excel functions and maybe some filtering, but I'm not opposed to figuring out a VB script if you think that's what I should use.
View 1 Replies
View Related
Jul 25, 2006
I have a dynamic drop down validation List, which comes from another
spreadsheet list and have a few random blank cells in it. I need to
drop these blank values from the List without making any change in the
parent list. I may also have some duplicate values in the List and need
to drop them too.
View 13 Replies
View Related
Oct 21, 2013
I would like to reorder a list whilst ignoring any 0 values. I've attached (I hope correctly!) a spreadsheet of what I mean. It's pretty simple, but I've been banging my head over it for a while now!
Sample.xlsx
View 4 Replies
View Related
Feb 7, 2014
I have a column of week numbers but some gaps in the list (e.g. the job is complete and so I do not want to reference it) I am trying to create a list of jobs by week number. I need to sequentially number jobs to then use Vlookup e.g. job1-week1 job2-week1 etc to display be week.
I can work out to number the list ignoring the blanks but then resetting to 1 with each new week?
Workbook1.xlsx
View 2 Replies
View Related
Nov 24, 2008
I don't know if this is best in a formula or macro but what I am trying to do is create a list of data with no empty cells from a list of data with empty cells.
What I want to say is if A1 is blank move to A2, if it's not return the value in A1 to B1. If A1 and A2 are blank then return the value in A3 to B1 and so on. Generally it's a sort function but I want it to happen automatcially and lkeep all my values in the original order
Original Version:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
Desired outcome:
Date 1/4 Value 1/4
23/02/199913.506
5/05/199911.901
14/05/199912.152
24/05/199911.607
7/06/199911.187
29/07/199911.828
2/09/199910.473
6/09/199910.429
View 9 Replies
View Related
Dec 11, 2008
I have a set up of investments. Say A1 through to G1. Then on the next row the investments range from A1 to G1 again. This continues down many rows. There are spaces such as D1 and D2 through E2.
A
B
C
D
E
F
G
1
ausbil........................
Starting in column H, I would like to list the investments but ignore investments that have already appeared on the row (ie list only the first occurence) and ignore the blanks as well. For example, D1, E1, F1 are to be ignored because of the blank, and the fact that ausbil and amp already appear.
In row 2, the blanks in D2 and E2 are ignored as well as the repeated 'amp' in F2. So the table should look like below from column H:
H
I
J
K
1
ausbil
amp
vanguard
bt
2
amp
becton
fidelity
bt
Is there a simple formula for this? It has to be in rows as I have at least 60 columns of data before these columns begin. There are at least 300 rows.
View 9 Replies
View Related
Jun 4, 2012
I am trying to create a large range composed of smaller ranges. Some of these ranges may overlap so I want to make sure when I add cells to the range they don't already exist. I know how to make sure the same value doesn't exist in a range, but not the same cell.
View 2 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Feb 17, 2014
I have a sheet with a data in range A1:J9. I have a drop down list in each cell from A2:A100.
I'm trying to store all values in A1:J9 in an array using the property CurrentRegion.value like below
Code:
Arr=Range("A1").CurrentRegion.Value
The issue is that is taking as current region the range A1:J100, even if I don't have selected any value in the drop down list from A10:A100.
Is there a way to force CurrentRegion to select only values from A1:J9 ignoring the blanks dropdown list values or a similar way to load an array with values in a contiguous range?
View 9 Replies
View Related
Oct 2, 2007
i have a list which is populated with data from another sheet.. if there is no data in the corresponding cell on the other sheet then the cell is blank.. i've tried using:
=OFFSET($Z$2,0,0,MATCH(REPT("z",255),$Z:$Z))
but it doesn't see the blank cells as blank i.e. no data in them as they contain formula's.. (even although there are no values populated) - can anyone offer any help in relation to this???
View 9 Replies
View Related
Dec 28, 2007
Basically in sheet 1 column A I have a long list of part codes. This is an ever expanding list so I assume I need to make it a dynamic range. This list has duplicate entries of certain part codes which is fine. I need to keep sheet 2 up to date with these part codes but I don't want duplicates on this sheet. I was then going to use vlookup to derive some but not all information for the part from sheet 1. I would also like the vlookup formula to expand as new parts are added to sheet1 and then subsequently copied to sheet2.
View 2 Replies
View Related
Oct 31, 2013
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
View 1 Replies
View Related
Mar 12, 2009
I am trying to generate a good looking, dynamic report tab that runs off another tab that contains ugly raw data for website traffic. This should then drive a couple of charts based on the parameters I specify.
The Raw Data
This is daily data for keywords that we advertise on through Google. Associated with each keyword are various fields:Clicks
Cost
CPC (Cost divided by clicks)
Quotes
Sales
CPQ (cost divided by quotes)
CPS (cost divided by sales)
CTQ (quotes divided by clicks)
QTS (sales divided by quotes
CTS (sales divided by clicks)
Avg Pos
There are maybe 30 keywords - each with daily information for the above fields.
The layout of the raw data is:
Column A: Date
Column B: Keywords
Column C: Clicks
and so on.......
The Report
This is the nice looking report where we can pull in the required bits and bobs in a nice format. Because some of the above fields are calculations I've not been able to achieve what I need using a normal pivot report.
What I would like to be able to do:
Populate a summary report using the above raw data but be able to specify certain things such as:The date range I want to see data for
The specific keyword(s) I want to see data for
For example v- we are feeding the daily information into the raw report each morning. One day I might want to see summary stats for a particular data rang on maybe 3 of the keywords so I'd somehow like to select appropriate date ranges and keywords from drop down lists and then I see the summary stats for the appropriate date range broken down by each keyword.
I'd also like a total underneath this report to add up or calculate the totals and averages for the data based on the parameters I specify.
Finally, given all of the above, I would like to run a dynamic chart based on the raw data but taking into account the filters I specify on the slick report sheet.
So....if I set the date range as From: 01/03/09 to 12/03/09 I can see daily clicks, costs etc for the particular keywords I specify in the drop-down menu or what-have-you
View 14 Replies
View Related
Jul 21, 2009
I am using the follwoing code which works as it is supposed to except that it does not remove the duplicate entries, almost as though the code skips that step. How can I fix this?
View 7 Replies
View Related
Feb 27, 2008
I am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1"
=OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
View 6 Replies
View Related
Apr 18, 2013
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
View 1 Replies
View Related
Mar 8, 2014
I have a simple range, say, A1:G1. I want to have another cell, H1, reference whatever rightmost cell in the range contains any data. All the cells in the range will be using text.
So if B1 contains data, I want H1 to show what's in B1, but if data is inputted into F1, I now want H1 to show what's in F1.
View 6 Replies
View Related
May 9, 2012
My application has a information that is constantly displayed to operators. In one of the non-active sheets, is a log of what is happening and I need to export this log in a (prefereably) .html format to display on an Apache web server.
The monitored sheet always have to be visible, and I do not want any dialog boxes popping up, so the Sheets("log") has to be exported under this criteria... Only need the first 1010 rows exported to the html file.
Would all of that be possible?
View 7 Replies
View Related
Jan 9, 2014
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
View 2 Replies
View Related
Feb 14, 2013
I need to do stats for each month within a set of data. Ie take the min for all data in the month of Jan only and repeat for all other months etc. Is there some way I can set up a Min function to only consider the data belonging to jan for example and have it change and only consider Feb, then march.. etc Seems like it would be easy to just do this manually but there is a large timeframe over which data was collected so would take forever.
Have attached sample of data. rainfall.xlsx
View 4 Replies
View Related
Mar 2, 2013
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following:
________________________________________________
Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev)
COGS ||||||||||| + (% of Total COGS)
Margin |||| + (% of Total Margin)
-------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: |
MN | Midwest | Major | Revenues | $$$
MN | Midwest | Major | COGS | $$$
MN | Midwest | Major | Margin | $$$
MN | Midwest | Major | % of Total Revenues | %%%
MN | Midwest | Major | % of Total COGS | %%%
MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
View 4 Replies
View Related
May 27, 2014
Eng list.xlsx
The attached file (a copy of my main one) has a list of our engineers, and what stock they carry. The stock parts are the 64, 65, 66... numbers.
I need to create a list from this (as underneath the main table), for all instances where there is a 'Y' in the columns next to each engineer. So if an engineer has 3x pieces of stock, they need to appear in the list 3x times. If they have 1x piece of stock, they appear in the list once.
View 8 Replies
View Related
May 28, 2014
I am trying to create a dynamic Excel line chart.
All is well, except for my x-axis (which is a text axis). It currently looks like this: Dynamic axis.jpg
I am using the Offset formula. The formula for my x-axis is =OFFSET(Worksheet1!$D$4,0,-3,COUNT(Worksheet1!$D$4:$D$36)). This is to show the axis if cells in Column D are filled up appropriately.
However, in the cells containing the axis name itself, this formula is used =IF(D9=0,NA(),'Worksheet2'!A6). I've tried removing the formula from these cell, but that didn't solve the problem.
View 5 Replies
View Related
