Dynamic + Interactive Charts
Jul 28, 2008
I've just read up on interactive charts and have got that sorted for my worksheet. But I have a slightly more complicated issue now...
The worksheet Logistics has results for 76 different tests and these tests have been taken multiple times. Hence, I can logically have a trendline of results for every test i.e. Test 1: 1/1, 2/2,3/3 etc...
I'll go nuts creating 76 charts...and it's a terrible messy way of getting the user to see how he's fared over the number of times he's taken a particular test.
What I'm looking for is a way for the user so indicate which test he wants to see the results for and the relevant results to come up. In other words, on choosing the trendline of results for a particular test. Possible?I saw something similar on a website but am not sure if it was relevant...
View 9 Replies
ADVERTISEMENT
Sep 19, 2012
I am looking for a way to manipulate xy data graphically by moving points in an excel scatter plot. This functionality was present in older versions of excel, but I can't seem to do it in the MS office 2010 version.
View 1 Replies
View Related
Jun 27, 2013
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
View 2 Replies
View Related
Feb 24, 2007
I have a spreadsheet that calculates a value for each age up to 65 on a separate row. I have parameterized the spreadsheet so that depending on the age entered by the user, any row below the age 65 calculation row is blanked out (set to "") with an if statement.
After a new age is entered I would like a line graph to compare the values. My problem is that if I select all of the possible data values (I assume none are less than 20, therefore there are 45 rows of formulas) any rows that have blank values show up in the chart. My data starts in cell A1.
I would like to come up with a macro that accomplishes the following . . .
- determines the number of the lowest row that has a number value in it (since there are formulas below this, Ctrl down does not do this correctly)
- set a named range starting from cell A1 based on x rows (calculated in the prior step) and y rows (constant)
View 9 Replies
View Related
May 10, 2006
I am trying to learn how to use offsets for dynamic charts and having trouble getting the formula to pick up the correct values.
View 3 Replies
View Related
Oct 3, 2012
I am creating dynamic charts with a data sheet that is horitzonal. My x-axis : =OFFSET('chart data'$B$1,0,1,1,COUNT('chart data'$2:$2)-1), y-axis: =OFFSET('chart data'!$A$1,0,1,1,COUNTA('chart data'!$1:$1)-1). My formulas are giving me #VALUE. Not sure why.
(formatted general not as dates)
1980
1981
1982
1983
1984
1985
1986
1987
1988
CONSUMPTION
70
61
67
83
89
75
67
71
71
View 5 Replies
View Related
Oct 5, 2013
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
View 1 Replies
View Related
Oct 22, 2007
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Sep 14, 2006
I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'
View 9 Replies
View Related
Dec 22, 2006
i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop
View 9 Replies
View Related
Feb 6, 2008
I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E
1 2 3 4 5
9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
View 4 Replies
View Related
Mar 2, 2013
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following:
________________________________________________
Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev)
COGS ||||||||||| + (% of Total COGS)
Margin |||| + (% of Total Margin)
-------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: |
MN | Midwest | Major | Revenues | $$$
MN | Midwest | Major | COGS | $$$
MN | Midwest | Major | Margin | $$$
MN | Midwest | Major | % of Total Revenues | %%%
MN | Midwest | Major | % of Total COGS | %%%
MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
View 4 Replies
View Related
Oct 4, 2013
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
View 1 Replies
View Related
Jul 5, 2006
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
View 9 Replies
View Related
Nov 2, 2013
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("B2")) Is Nothing Then
Range(Range("B2").Value).Copy
Range("P2").Paste
End If
End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
View 8 Replies
View Related
Dec 6, 2007
I am trying desperately to link activex checkboxes I have in an excel spreadsheet to a textbox. I need a textbox in cell K11 to appear whenever the checkbox in cell H11 is marked. Is this possible to create in excel using VBA?
View 9 Replies
View Related
Apr 7, 2006
I'm trying to create a piechart to display the variance from project deadlines.
Red > 10 days
Yellow 5-10 days
Green < 5 days
I have the macro written and the piecharts are being created however they seem to lack functionality. I would like to be able to click on a segment of the chart and have it display the data (projects) that have that status. Any ideas on 3rd party software, JavaScript, any other methods of creating such an interactive pie chart?
View 4 Replies
View Related
Apr 10, 2007
I would like to know if it's possible to create an interactive map with excel?
I explain my case: I have a map of UK, that is divided into 8 regions. For each region there is a value of rainfall ratio. I would like that, when the user click on a region of the map, the corresponding value of rainfall ratio is going to a cell or wherever, such that I can use it for further calculations.
View 4 Replies
View Related
Apr 18, 2008
I am looking for interactive mathematical kid's game that can be created in Excel. Can someone please help me create one or direct me to a sample?
I saw one example below but this is not excel based. Can a similar one be created in Excel?
[url]
View 9 Replies
View Related
Feb 13, 2007
I'm looking to have an interactive calendar created that when a specific date is entered in a cell,...example(A1)
The calendar at the top of the screen will reflect 3 months out (in a standard box looking format with the starting day highlighted in Bold. Imagine 3 calender boxes (always 3 months) and when you enter a date in cell 1,...(say 6/07/07, the calendars at the top adjust automatically so that the first box now reflects June and has the 7th day in Bold...the other two boxes now obviously reflect July, and August.
View 9 Replies
View Related
Jul 8, 2009
I am a novice VBA user, with a more-than-basic knowledge.
I have created several userforms in the past, but they were all “static”, meaning, the user was allowed certain options from a variety of combo boxes, and after filling all the data, the result was migrated into a sheet (database).
Now, I am trying to create an INTERACTIVE userform in which certain combo boxes will become available based on a user’s selection in a previous combo in the same form.
For example:
If - in a “Payment” combo - the user will select “Check”, 3 new text boxes will appear (Date, Sum, Bank code) and the user will fill certain data related to his selection.
If, on the other hand, the user will select (in the “Payment” box) the option “Installments”, 3 other boxes will appear (Number of installments, first installment month, sum per installment). These boxes can either be text boxes of combo boxes, and here the user will select/fill the relevant data.
Naturally, the previous boxes, related to the “Check” option, will be made invisible.
Personally, I don’t care if ALL boxes are always visible, as long as they are activated or disabled (grayed out) based on user’s selection in the “Payment” combo.
The next step will be to migrate the selected/filled data from the form back into a sheet, where the data will be placed in different columns based on the final selection the user made in the form.
View 9 Replies
View Related
Nov 3, 2013
I am trying to create an interactive dashboard.
I am attaching a sample data file that contains two tabs (data and dashboard). By looking at dashboard tab you will know what I am trying to build. Based on the drop down values I would like to populate the data on the dashboard tab.
sample data.xlsx‎
View 11 Replies
View Related
Jun 3, 2014
I have created a dashboard in excel and want to convert it into an interactive web page.
View 3 Replies
View Related
Sep 5, 2012
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
View 2 Replies
View Related
Oct 13, 2008
I want to highlight the unprotected cells as seen in the attached PDF document in excel 2007.
View 14 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Jun 21, 2009
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies
View Related
Jun 24, 2009
I have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
View 5 Replies
View Related
Oct 31, 2013
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
View 1 Replies
View Related
Jan 12, 2010
I have never done this before and I am having a hard time - it seems that none of the graphs in the Excel menu accommodate what I want and I have no idea what I am doing to boot.. Could someone PLEASE help?
My data is: American & Japanese workers can each produce 4 cars a year. An American worker can produce 10 tons of grain a yr. / Japanese 5 tons of grain a yr.
Each country has 100 million workers.
Need PPF and Opportunity cost of car & grain from U.S and Japan.
I have at this for two days and I cannot get the information in the chart the way it is supposed to be. It makes no sense evry way I have tried it and the graphs don't even look correct. I've tried several line graphs and scatter graphs..
View 11 Replies
View Related
