Excel 2010 :: Graphical Interactive Data Changes In Charts?
Sep 19, 2012
I am looking for a way to manipulate xy data graphically by moving points in an excel scatter plot. This functionality was present in older versions of excel, but I can't seem to do it in the MS office 2010 version.
I'm using Windows 7, Excel 2010 on PC. I have a graph set up based on my teams performance. Below I will attempt to lay out the graph and what I'm looking for. What I'm trying to make happen here, is have my jpeg, or bitmap which is represented by 0 to move as the graph increases or decreases. Example, right now if I input my data and sayJ.P. increases two points I end up with this -------0--. Or if Y.P. decreases by two points I end up with ---- 0. Is there anything I can do to have my picture adjust with the graph?
I've just read up on interactive charts and have got that sorted for my worksheet. But I have a slightly more complicated issue now...
The worksheet Logistics has results for 76 different tests and these tests have been taken multiple times. Hence, I can logically have a trendline of results for every test i.e. Test 1: 1/1, 2/2,3/3 etc...
I'll go nuts creating 76 charts...and it's a terrible messy way of getting the user to see how he's fared over the number of times he's taken a particular test.
What I'm looking for is a way for the user so indicate which test he wants to see the results for and the relevant results to come up. In other words, on choosing the trendline of results for a particular test. Possible?I saw something similar on a website but am not sure if it was relevant...
I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.
Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.
As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.
How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?
I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.
1. Pull data from the internet 2. Perform calculations on the data 3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values. - It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts - I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area - It works perfectly fine when I step through using F8 - I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait - Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code: 'Chart variables Sheets("Summary").Select Dim ChartRange As Range
I am using Excel 2010 to create a simple chart. When I enter the information, highlight it and select a chart, the chart area appears blank. It doesn't matter what kind of chart I choose- it still appears blank. I've tried going into the Advanced options and indicating for All objects to be shown and that didn't work.
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Me.Range("B2")) Is Nothing Then Range(Range("B2").Value).Copy Range("P2").Paste End If End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank Pic2
How i want it to look like upon printing Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
I'm trying to get a chart to show the Grand Total for the following rows without graphical representation. However, everytime the Grand Total is part of my dataset it appears as a stacked column. I do NOT want to see it as part of the chart.
Grand Total 10 A 3 B 2 C 5
As you can see the Grand Total line will be equal to adding up the one column of all rows in this chart. I can get the Grand Total line to appear in my data set, but everytime, it appears in my graph.
I am attaching a sample data file that contains two tabs (data and dashboard). By looking at dashboard tab you will know what I am trying to build. Based on the drop down values I would like to populate the data on the dashboard tab.
I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?
I am building automated solutions where graphs source data is based on outcome of formulas. In case of line graphs I use #N/A as result if no data is available or formula results into an error - this way the data point and data label will not be shown in the graph.
However this does not work for bar graphs - with #N/A, #DIV/0, 0 or "" the bar itself is not shown but the data label is shown (as #N/A or 0). How can I set-up my formulas so that if result is 0 or formula is in error that the graph does not display the data label.
Attached excel file shows same data in 2 charts - 1 line chart (=OK) and 1 bar chart (=not ok). The data for chart is pulled from 2 other tabs (week&month) and merged into 1 data source for graphs.
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I have a question about using conditional formatting in excel (2010); I made a table with the following columns:
"Supplier Name" "Supplier Lead Time" "Internal Lead Time" "Total Lead Time". I made two different scenarios to show different supplier lead times and different internal lead times, and used the minimum function in the "Total Lead Time" column to find the smallest total lead time to select the best supplier.
The last thing I would want to do with this set of data, is plug in a formula that would somehow indicate which supplier corresponds to the shortest total lead time (which supplier has the smallest supplier lead time). I'd like to be able to use a formula that enters the name of the supplier in a designated cell, which I could indicate as the "Preferred Supplier" cell. If this is not possible perhaps there is a way to highlight the supplier's name with conditional formatting?
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
I have one excel 2010 workbook with 5 work sheets, each work sheet contains a list with first/last name(one column) and the company name, some have a 3rd column with their email address in each sheet represents each year starting at 2008 thru to 2013 i have to find out if the people that attended an event in 2008 also attended it in 2009/10/11/12/13 and if they didnt, put their name and company name onto a blank worksheet within the same workbook without using a macro, how can i do this?
I have a parent spreadsheet with raw data(with errors) and a child spreadsheet without errors. I want to merge the child into parent. (:{). I am thinking of comparing multiple columns from each sheet to ensure maximum accuracy. And when those columns match up we paste the corrected column data from child sheet to parent one. I am using windows 7 and Excel 2010.
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String With CreateObject("VBScript.RegExp") .Pattern = "reg_d+(_)+d+//d" GetString = .execute(txt)(0) End With End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
I have a workbook with data on sheet1 and a summary on sheet 2. I want to use two drop down boxes on sheet 2 (B3 and B6) to look up matching data from sheet 2. What formula is best to enable these two look_up values to be used? I saw an example where the two values were separated by a comma within {} i.e. {B2,B6}, but only got an error when I entered the formula into my Excel 2010 sheet.
I have previously used VLOOKUP, but this comes back saying I have to many arguments. I can attach the workbook if that makes it easier to explain.
I have a problem converting hourly data into daily data for electricity import capacity. My file has the following form: | Connection | Date | Period | Available (capacity) | Where 'Connection' identifies the physical location of the capacity (4 possibilities, Germany -> Netherlands; Norway -> Nehterlands; Belgium -> NL; UK -> NL), 'Date' refers to the date, Period refers to hour of the day (e.g. 18:00-19:00) and 'Available' refers to the import capacity of electricity on that conncetion during that hour. I need daily aggregates and tried several things such as DSUM but I cannot manage I've shortened the attached file quite a bit because of the upload size restriction. I am using Excel 2010. I've tried some suggestions in similar topics but none worked for me.
I'm using Excel 2010 to link a table to a XML file on my server. I'd like to distribute the Excel file to a group of people and have it updated every time the XML file is updated on the server.
In Excel, I'm pulling the data using "Data", "From Web" and then I type in the path of the XML file.
Excel then builds a table with all the data but if the XML file is updated on the server, the data remains static, even if I click "Refresh" or "Refresh XML data" on the table.
It should be able to download new data including new columns to the table, if any.
I have an input spreadsheet to capture site addess details using Excel 2010
The Site Name is in Column A starting at row 8, each row is formatted with validation rules etc. but want only expose rows with data and one blank row to add next site.
So I needed code to unhide the next row without data - found what I needed in this thread
Have adjusted to my needs
[Code].....
It works by adding the next row but if I then delete the last rows Site Name I get a run time error with "Unable to set the Hidden property of the Range class" at follow code line.