I want is to enter a name and e-mail list through the form. The name is then entered into a column E and copied into column A that automatically alphabetizes the list for a dropdown list and a column reference is entered in the next column B using vlookup so the column references remain with the proper name.
Ideally when a new name is entered in column E, column F is updated to the next column references, the name is copied to column A and the lookup formula in column B is copied down.
is there way way i can allow users to hit enter in a Userform to submit what they have? instead of haveing to tab over or click on a button? or even make enter run the button function?
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck.
I've created a calendar user form, much like many of the examples I seen posted here. I've tried all that I could find but none would allow the user to use the Enter Key to make the selection like the mouse click.
I would like the use of the Enter Key to produce the same results as a Mouse Click.
On the attached workbook i have a simple form with text boxes and a enter button and cancel button.
So far, i have only got as far as the cancel button closing the form. I want to know what i have to do to enter each of the fields in to the cells written on the form. Also when i do press the enter button, if any of the fields are not entered then a message box must appear notifying the user all the fields are not entered and then finish by taking them back to the form.
What I am after is a user form that pops up when I enter Y in cells in Column L which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name Surname Code Address line 1 Address line 2 Address line 3 Address line 4 Address line 5 Post code Telephone Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a Print button to print the form would be beneficial. The only other button required would be a Close Form option.
I've got one more problem to solve with my current project. An example of the workbook is attached.
What i want to do is change the code on my 'enter button' of the 'input form' which can be shown by clicking the 'Add New Hedge' button on the summary sheet.
The change i want to make is when the user clicks 'enter', if the 'settle now' checkbox is false to add the details of the form to the unsettled hedges form as it currently does.
If the 'settle now' checkbox value is true then i want the form details to be added to the next available row on 'settled hedges' worksheet, in the same way it currently does for adding into the next available row of the 'unsettled hedges' sheet. Also here, i would want the value of the 'returns' textbox added to be added into column L rather than the text "unsettled". This would also mean when the 'settle now' checkbox is true that the 'returns' textbox needs to have a value before adding any details.
I have a userform with 5 text boxes and a command button.
I also have a sheet with a large amount of data on it, arranged into sections with headings (sheet1).
The user will enter the section heading he desires into textbox1, then other data into all of the other text boxes. Then click the command button.
I need a code that will search sheet1 for the heading they entered into textbox one, then find the next empty cell BELOW the heading (in the same row). It will then put whatever the user entered in textbox2 into that cell, textbox3 in the cell directly to the right of it and textbox4 to the right of that one, and so on.
I have 4 textboxes that the user enters data. I then have a button on the user form.
i would like to write code so that when the user hits the button... Textbox1 data goes into active cell Textbox2 data into the cell below Active cell Textbox3 below it and textbox4 below it then close the user form.
I am looking to create a form that when a user enters data in it, and clicks a save button it will submit that data into cell A2, and then with the next time the enter data it will submit that data to cell A3. I would like it to continue moving down a cell each time somone hits a "submit" button.
I am looking for a way to make the data mail merge friendly for our clerical staff! The intention is to be able to create a letter to the parents listing the dates absent and unexplained.
There are currently 7 columns ; ID, Surname, First Name, Current Level, Current Form, Absence Date, Absence Code.
I have downloaded and implemented ASAP Utilities and the Transpose funcion is really useful - however it works in predetermined steps - 1, 2, 3, 4 etc rows of data are transposed, depending upon the number you select. Unfortunately there is no such pattern - each student thas a different number of unexplained absences. Some have 1 while others may have 20.
I am trying to find out how to quickly remove do not mail names from our mailing lists. We have several lists and our do not mail list is huge(280) so it's getting very time consuming to clean the lists. I'm assuming I can copy the do not mail list names to the current mailing list and then remove duplicates..but I want to remove both duplicates when i do that. My understanding of the remove duplicates feature and unique values is already a bit foggy.
I have an Excel 2003 list with four columns as shown below:
Zipcode CRRT Count Bundles
85710 C004 693 14
85710 C005 867 18
85710 C006 1021 21
I want to "expand" this list to use in a Mail Merge program to produce tags for our direct mailing. Each bundle contains 50 letters, so in the first line on the above spreadsheet, there will be 13 bundles of 50 and 1 of 43. Currently, I can cut and paste to create the following table, but there has to be an easier way...
Zipcode CRRT Count bcount Bundle ibundle
85710 C004 693 50 1 14
[Code] ........
So as I pull this into a mail merge I will get a tag that shows the zipcode, the crrt, the total pieces for that crrt, then number of the bundle for example " 1 of 14" and the quantity in that bundle, for example "50 of 693", then the next bundle tag will print, 3 to a page. I know that here has to be an easier way either in the mail merging process itself or with EXCEL? Am even open to build these with ACCESS to create the tags. The beginning database contains anywhere from 350 to 800 lines of original data, so as you can see the cut and paste is VERY time consuming.
I have a workbook that has multiple worksheets and I would like to use a command button to e-mail just one selected sheet. I want to create the single sheet as an attachment on a new e-mail message but leave the addressing to the user as it will vary, and not save the single sheet. My challenge is that the users have a variety of different e-mail clients (Outlook, Lotus Notes and others).
I wrote a macro which creates desired output based on one default variables. But I want to change it to take user selected assumptions and perform the macro for each user selected variables.
I am confused with user forms and controls and what to use.
Can anyone give the code to how to add a list box to a userform and then add items to the listbox, and run macro based on thegiven input in the list box?
I am trying to write a macro to send mail on every Friday and also on last day of every month. If the last day of the month falls on Saturday or Sunday then the macro should mail on Friday. I have written a separate macro to send a mail. I have also written to check day(ie Monday, Tuesday etc) of today. If today is Friday or month end i can send mail. I dont know how to tell the macro to send mail on friday if the month last date is saturday or sunday.
Sub done() Dim Dat As Date, x As Integer, y As Date, sorry As String Dim str As String sorry = "Today is not friday or month end. So i cannot send mails" str = WeekdayName(Weekday(Now()))
I have 4 lists and I have some code that let's me select an item in 1 list and get its corresponding value in the second list. I have managed to convert my lists to combobox on doudle click by using some code and now I want to be able to hit enter and the value that I searched for in the first combobox gets its corresponding value in the second combobox.
I am looking to allow a user to enter a unique value when a drop down value is captured from a list i.e 'Other' (Possibly a pop up box), then I require this value to be hidden and calculated along with others to show the average (The average calculation obviously wouldn't be in the same cell).
I have a cell in my spreadsheet that I use to control the size of a column. I formatted the cell as a number and added data validation to make sure the number is greater than zero. Then I realized that I need to also allow for the option of auto sizing the column as well. This would require a data validation list type with something like True and False for the choices.
What I want to be able to do is have it both ways. I want a drop down list in that cell with the options Auto Size or Custom. If Auto Size is selected the cell value gets set to that. If Custom is selected I then want to be able to type in a number.
ddl.png
[URL]
Is there a way to setup a cell such that the value is either an item from the drop down list or, entered directly (depending on the list selection)?
I know I can do it with dependent lists but that would require two cells, one for the auto size mode (true/false) and the other for manual width value.
I have a form that is built based on the number a person enters. For Example - if the person enters the number 2 then 2 ComboBoxes are entered on the form.
The problem that I am having is that the list is not showing when the form is loaded. In the Project Screen all is OK until the final step when the form is Shown.
I have two groups of data listed in one sheet. I have supplier names down the side and locations across the top, with data filling the respective cells. Refer excel file attached. At the moment I am manually merging the two lists to form one. I am copying both rows of headings and creating one unique row heading list, deleting any duplicates, then cutting and pasting the data under the respective heading. Because I am going to have to do this every month when new data comes in, I want to know whether their is a way to create a macro to automate this process...
Working on a user form... I have a combo box, with a list of the items available.... then I have a text box that inputs the quantity. Is there a way that I can put a list underneath in such a way that every time I select a item, put the quantity in the text box, it will list down in that list?
In other words... If I have 5 products for the same order I would pick one, qty and click add, then another one, qty, and add... so on. That way I would be able to see all of the items that I have picked.
I created a nice list box where the user can select any members of a ListBox1, and put them into a ListBox2. This happens in a Form I created, UserForm1.
Now I can't figure out how to get this ListBox2.list from Userform1 into my code in Module1! Any reference to ListBox2 in Module1 results in an error like "Run-time error '424': Object required.
I figure the before/after image would be best to describe what I need. I have various sections of data saved in this one spreadsheet which a program reads from for comparisons.
Right now they are in a list form like this:
Now the end result I want to look like this. Basically take the items in the column, and add the items selected next to it, one in each column not including itself of course.
These are basically the comparables, example this list would be "car manufacturers", and below that in cell A7 I might have another list started that has to do with "motorcycle manufacturers" etc
The end result would give a row of all possible combinations. The app we use pulls from the rows so it needs to have all of the items that are comparable in there and I can't seem to find a way in which to do this.
Hopefully this is understandable when you see what I manually did (unfortunately I need to do this for about 4000 entries, a few hundred groups of different characteristics).
I am trying to create a form with a combobox drop down menu. The list I need displayed is in cells C4:C20 but I only want to show unique values not all of them.
I would like to create a form to select some columns from a list of columns. This could make it simpler for an end-user to chose which columns they want to see in my application. (see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list. However, I doubt this could be done.
So, to be practical, I would put a button on my sheet. When the user clicks the button, a form would appear and show the current list of columns. The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants. The number of column in the table can change. When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form? Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
