I have 4 textboxes that the user enters data. I then have a button on the user form.
i would like to write code so that when the user hits the button...
Textbox1 data goes into active cell
Textbox2 data into the cell below Active cell
Textbox3 below it
and textbox4 below it
then close the user form.
I've created a calendar user form, much like many of the examples I seen posted here. I've tried all that I could find but none would allow the user to use the Enter Key to make the selection like the mouse click.
I would like the use of the Enter Key to produce the same results as a Mouse Click.
What I am after is a user form that pops up when I enter ‘Y’ in cells in Column ‘L’ which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name
Surname
Code
Address line 1
Address line 2
Address line 3
Address line 4
Address line 5
Post code
Telephone
Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a ‘Print’ button to print the form would be beneficial. The only other button required would be a ‘Close Form’ option.
I am trying to do is create and link and user form to put information into a spreadsheet. Layout of the form is done but I'm not sure how to link the cells. Also, there are some cells pre-filled that should show up on the form but I don't want the user to change those (columns a,b,c - guessing i will protect those).
Would be great if the user could navigate rows within the form so I included buttons for previous and next entries (this feature would be very similar to the built-in data form that excel provides). My sample spreadsheet is attached.
I’m looking to use a user form to populate a quotation template, I have been able to link the first part of the form to the sheet as these are static cells but I’m struggling in getting the items details area of the form to work as I need. Below is a brief description what I need.
Item Details area
Move down a line after every time the add button is pressed and clear contents of the text boxes for the next item.
Also I want to make each * denoted item required before you can add a new item
I’ve uploaded a copy of the file if my description isn’t too clear
I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet
http://www.srfl.ca/userform.htm
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
On the attached workbook i have a simple form with text boxes and a enter button and cancel button.
So far, i have only got as far as the cancel button closing the form. I want to know what i have to do to enter each of the fields in to the cells written on the form. Also when i do press the enter button, if any of the fields are not entered then a message box must appear notifying the user all the fields are not entered and then finish by taking them back to the form.
I have a userform with 5 text boxes and a command button.
I also have a sheet with a large amount of data on it, arranged into sections with headings (sheet1).
The user will enter the section heading he desires into textbox1, then other data into all of the other text boxes. Then click the command button.
I need a code that will search sheet1 for the heading they entered into textbox one, then find the next empty cell BELOW the heading (in the same row). It will then put whatever the user entered in textbox2 into that cell, textbox3 in the cell directly to the right of it and textbox4 to the right of that one, and so on.
I have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
I want to prevent user from entering duplicate text or numbers in a cell using the Data Validation.
View 9 Replies View RelatedVery simple Excel 2007 spreadsheet. It consist of four columns with either numeric or alpha data in the. No formulas, no macros etc...
She emailed the spreadsheet to me and it works fine, I can enter data without problems. Whenever she tries to use it she just can't enter any data. She clicks in a cell and it highlights but she doesn't get a cursor and can't enter data. If she tries to click in the area underneath the toolbar to enter data she also does not get a cursor!! It used to work just fine for her but has suddenly stopped!
I've been going round in circles with this for hours and have got no-where. I 'm trying to get Excel to paste in a set pattern of data based on an input cell.
In row 1 I have months starting in cell B1. B1 = April 12, C1 = May 12, D1 = June 12, and so on
The user would enter the data in column A, starting in row 2
If the date in A2 = May 12 then Excel would enter 10 in cell C2, 20 in cell D2 and 30 in cell E2. If the date in A2 is changed to June 12, then the previous data would be cleared and Excel would enter 10 in E2, 20 in F2 and 30 in G2.
Date would be entered in A3, A4, A5 etc and I would want it to post the same fixed data depending on the date the user enters in teh relevant row.
I've tried IF statements and also some code but can't even get near it working.
I'm using Excel 2010, and I need to restrict the value the user can enter into a cell (E9).
In cell E3 is the screen width (pixels). eg 6024
In cell E5 is the preferred width of a window. eg 450
The user, in cell E9, enters an x coordinate for which they prefer the top left corner of the window whose width is specified in E5.
If the value that the user enters in E9, added to the width entered in E5, exceeds the value of E3, (if E9+E5 > E3) then the value should be disregarded (window will be off right of screen) and the user re-enter.
I'm not familiar with the use of data validation, so I'm uncertain as to how to use it in this circumstance.
Basically, in the "Thisworkbook" code , i have some code in the Workbook_BeforeClose section. Currently , it autosaves the workbook in a folder i have specified.
However, i need to add some code.I want to check that a certain cell has a value in it before the user closes the workbook, and if the cell is empty, show a messagebox asking him to enter a value.
I know how to get a messagebox to pop up, the only thing is once the user clicks the OK button,
i need the rest of the code execution to pause, allowing him to make the change then if he clicks the "X" (top right of the screen) to close the file or application, the filesave dialog appears and he can then save the document.
how to go about this because at the moment when user clicks ok, the messagebox just disappears and filesave dialog appears and he doesn't have a chance to edit the cell.
I need to use the user form to create the fields in the next free column in the parts data sheet.
At the moment, it just writes over the firsst part i create. Have tried countless methods but am new to this vba business. To take it a step further, i need to concatenate the three fields and copy this into the parts data entry, Again i have tried (see code) but cant get it to work. Finally, If possible, I would like to check the parts already created, so duplicates cannot be made.
I am trying to display a message box for the user if there is "agency" in cell o8 but nothing in p8... I tried the following code but it doesnt work..
If Range("o8").Value = "Agency" And Range("p8").Value = "" Then
MsgBox "Please provide name of agency in cell p8"
Sheet9.Shapes("cross").Visible = True
Else
VBA code to get userform input from form to "Data" worksheet. Data starts at columns A3..AG3. I need the code for the "Input" button to put Month, Date, Type, Comments under their corresponding columns and the "Amount" to go under the appropriate column that is selected by the Option Button. I've included a picture with in "red" comments.
View 8 Replies View RelatedI have a user form designed and now I would like to be able to program a Command Button to "SAVE" and when it is clicked, I would like to save the results of my fields to another worksheet. I have a defined range that I would like to have the inserted row into?
View 2 Replies View RelatedThe text box where the end user types in the data - I want to make this have a drop down list like when using data validation but dont have a clue how to.
View 5 Replies View RelatedI have created my first user form that puts the info gathered onto a seperate sheet.
We are a garage and its for cars that come into stock.
What I want to do is when we sell a car, have a way of removing the car from the database but recording the infomation that was in the first database and some additional infomation like who sold it and the selling price.
Basically at the moment our static data group use a generic sheet which lists all possible field variables. However, what I want to do is design something which only shows the fields that need to be filled out (ie if the field is shown it needs to be input).
Once the form is filled out it will get saved and sent via email, where it is then printed out and input by our data group. One way I thought about approaching this was to have 18 sheets which are hidden, and which are then selected when a report type is filled out. The other way would be to have IF statements but I think that would get complicated on the one sheet. Just really looking at ideas at this stage.... For example there are 30 fields on the sheet that we use now, but some reports may only need 5 of these fields - I therefore need to "hide" the remaining 25...
I have an excel file with data in it.I also have designed an user form so that the user can select few options in that to filter the excel file and get a new file. The reason i am doing this is because the people who are going to use this do not have any knowledge of excel. In the sample attached, the tab "Data" has the data in it. The User form should filter this particular sheet and throw out a new file. In the userform, I have mentioned the fields to be filtered.
View 2 Replies View RelatedI am a personal loans officer and have created a worksheet to input a range of information about an application. The information is personal details and details about the loan. The data I input runs down Column D [with line breaks to seperate the answers into categories] with the question beside it in Column C.
I do this for every new application as I use it for reporting on my loans as well as mail merge to produce documents for the loan.
Currently I am doing one per loan but would like to have a button at the bottom of the page that once clicked, it will push the data onto another worksheet so that all my loans for that month are on the one spreadsheet. The data will be pushed onto a row, not a column, but it will also need to find the next available row to put the data on.
Once the button is clicked, the first worksheet will clear ready for the next loan to input and the data will transfer to the 2nd spreadsheet. And, if possible, on the first sheet will be a drop down list of all the current loans so I can recall any application details to the first sheet if needed to update details. So if the 'loan number inputed' already exists, it wont create a new line on the 2nd spreadsheet, but will know just to update the fields.
User form data entry.
I need to save the data of For Eg. A form in Sheet 1, B form in Sheet 2, C form data entry in sheet 3.
what is happening now is that, all the entries are going in the Active Sheet that is open in the excel file. I want to automate the process of data entry, by making it enter data from specific form in specific sheet.
1st form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox12.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End With
End Sub
2nd form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet2.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox14.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End Sub
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
is there way way i can allow users to hit enter in a Userform to submit what they have? instead of haveing to tab over or click on a button? or even make enter run the button function?
View 1 Replies View Related