Error On Button Code Reference To A Subroutine
Mar 2, 2007
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button
Private Sub EPConversionButton1_Click(ByVal target As Range)
Convert_Hrs_EP target
End Sub
And here is the subroutine.
Sub Convert_Hrs_EP(target As Range)
End Sub
There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
View 9 Replies
ADVERTISEMENT
Mar 10, 2007
I have inherited support for the an Excel 'program' that seems to be fairly unstable. I am currently having problems with the following code in a subroutine (executed when the user presses a command button):
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$7"
.PrintTitleColumns = ""
.PrintArea = ActiveSheet.UsedRange
End With
Sometimes it works and sometimes I get the following error: Run-time error '1004'
Unable to set the PrintArea property of the PageSetup class.
… on the .PrintArea = ActiveSheet.UsedRange
I am having a hard time figuring out what is causing its wishy-washiness. Running the following code (launched from worksheet named 'consumer' with a command button):
Sub subConsumerFacesheet()...................
View 3 Replies
View Related
Feb 26, 2014
I need to allocate an existing subroutine (its code below) to a new button I'd like to add to my sheet. Two questions arise: to use "form control" or "activeX"?, also should I redfine the first line of the code?
[Code] .........
View 4 Replies
View Related
Nov 22, 2011
Is there a way to reference the controller that triggered a subroutine??
like the ME or ThisWorkbook, but for controllers on userforms.
View 2 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Nov 17, 2013
I met problem in calling into a subroutine. It is error 424. I have dim all variable. However I still get it.
Code:
Sub UpdateAll()
'
' UpdateAll Macro
[Code]....
I got the error when I pressed F8 to step into the getOneRecord() function, which is highlighted in red.
View 2 Replies
View Related
Aug 2, 2006
I am creating an excel file that has 2 buttons:
-1 that allows the user to select an image (works)
-1 that allows the user to select a MapPoint Map file (error 400)
The code below should be able to detail the problem.
Sub InsertImageOne()
Range("b5").Select
Application. ScreenUpdating = False
Picture1 = Application. GetOpenFilename("Picture,*.JPG,Picture,*.JPEG,Picture,*.GIF,Picture,*.BMP")
ActiveSheet.Pictures.Insert(Picture1).Select
Selection.ShapeRange.LockAspectRatio = False
Selection.ShapeRange.Height = 205
Selection.ShapeRange.Width = 344
Application.ScreenUpdating = True
End Sub
View 4 Replies
View Related
Dec 14, 2013
VBA jumps out of my called subroutine which is stored in a Module halfway.
When I call the SortLec() sub, it runs until y1 = Application.Match(MC & "-" & CI, rng, 0), and then it just jumps back to the SUB commandbutton1_click() IF statement. Why is it that VBA skips the rest of the code from my sub?
Option Explicit
Private Sub CommandButton1_Click()
Dim i As Integer
Dim numofrows As Integer
Dim workbook_directory As String
Dim file_name1 As String
[Code] ............
View 2 Replies
View Related
Oct 4, 2007
I'm am running Excel 2003 SP2 on Windows XP SP2.
I have a macro which modifies cells in a spreadsheet. But for brevity sake, I have an empty spreadsheet which has an Auto_open macro and two subroutines in it. The subroutines initially consist of just the Sub and End Sub statements.
The Auto_open procedure reads in lines from two text files (generated by another application), and inserts the lines into each of the empty subroutines. Auto_open then runs the two subroutines.
I have been able to get this dynamic creation of the subroutines to work for one subroutine, but not for the second. I receive the compile error: "Only comments may appear after End Sub, End Function, or End Property". I don't see anything wrong with the inserted code.
The modified subroutines appear fine, and if I save the macros with the modified code, close excel, rename the text files so they are no longer read in, and re-open the spreadsheet, the auto_open procedure and the two subroutines run fine. This tells me the code itself is okay, and yet it won't work during the initial run.
Below is the macro code in its original state:
Sub Auto_open()
Dim fso, f
Dim VBCodeMod As Object
Dim LineNum As Long
Dim StrFileName As String
ShowVisualBasicEditor = True
Set VBCodeMod = ThisWorkbook.VBProject.VBComponents("Module1").CodeModule
End Sub
----------------------
The contents of the read in file, %TEMP%subA.txt, is just one line:
MsgBox("inside SubA")
The contents of the read in file, %TEMP%subB.txt, is just one line:
MsgBox("inside SubB")
------------------------
When I open the spreadsheet the first time, it gives me the first message box from Sub A, but then generates the error and highlights the Sub SubB() line.
To duplicate the problem:
1. Insert the macro into a spreadsheet. Save and exit it.
2. Create the files %TEMP%subA.txt and %TEMP%subB.txt containing the single MsgBox lines.
3. Open up the spreadsheet. SubA will run and a message box will appear. Then the compilation error will occur.
4. Save and exit the spreadsheet.
SubA will now contain:
Sub SubA()
MsgBox("inside SubA")
End Sub
SubB will now contain:
Sub SubB()
MsgBox("inside SubA")
End Sub
5. Rename the two text files, so that the next time you open the spreadsheet it won't try to insert the lines from the files into the subroutines.
6. Re-open the spreadsheet. Two message boxes will now appear, one from SubA and one from SubB.
View 9 Replies
View Related
Mar 7, 2008
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
View 8 Replies
View Related
Oct 17, 2006
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
View 7 Replies
View Related
Feb 9, 2007
I have a relatively simple, though large, spreadsheet. I get the following in many of my cells: The Error Checking Options button is displayed and the cell itself. is marked with a small green triangle in the upper-left corner. When I click the button, the error type is displayed, followed by the following list of error-checking options:
information specific to the error type
• Show Calculation Steps: demonstrates all steps leading to the error
• Ignore Error: allows you to accept the formula as entered, without Excel displaying the Error Checking Options smart tag
• Edit in Formula Bar: allows you to edit the formula that is generating the error in the Formula Bar
• Error Checking Options: opens the Options dialog box, where you can select the rules governing error checking
• Show Formula Auditing Toolbar: displays the Formula Auditing toolbar
When I check the formula it calculates correctly. What triggers this when there is no error, is there a way to prevent it from appearing in the worksheet?
View 2 Replies
View Related
May 6, 2009
I have about 200 command buttons on my spreadsheet. Since there are so many of these, I would like to create a VBA routine to determine the cell name four cells over from the cell each command button sits inside, if possible (each command button is small and sits within its own cell). So the command button in cell F1, will let me pull the data or get the cell name of cell C2.
So I guess I am trying to figure out how to do relative references from a command button. Then this will be put in a public variable and passed to a subroutine which is the same for each command button. Only the data in the cells relative to the command button changes. I thought activecell might be useful for this, but you when press a command button, it doesn't make that cell the active cell.
I just thought there might be a simple solution for this, instead of having each single command button have its own subroutine just so each one can reference cells. All I really need is to run the same subroutine with variables from 200 cells, one at a time.
View 3 Replies
View Related
Mar 19, 2013
Is there a way in VBA to reference the activeX button which has been clicked? Like a ThisWorkbook equivalent for a button?
I have quite a few button whereby they set a parameter for a procedure 'TrendData' based on the row they sit in. Currently I just have the row number hard coded i.e. Call TrendData(5) but I want to amend this so that when I add a row it doesn't offset all my buttons.
For Example
Call TrendData(CommandButton3.TopLeftCell.Row)
However instead of typing CommandButton3, CommandButton4, etc. I would like the code to know which button had been clicked and just use that?
View 9 Replies
View Related
Jul 29, 2008
There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
View 9 Replies
View Related
Apr 10, 2007
When I click Tools Macros Record New Macro I usually get a box which allows me to chose relative reference and is displayed until I click stop.
View 4 Replies
View Related
Jan 5, 2008
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies
View Related
Dec 5, 2007
Sub Increment()
Dim Lr As Long
Lr = Cells(Rows.Count, "A").End(xlUp).Row
If IsNumeric(Cells(Lr, "A")) Then
Cells(Lr + 1, "A").Value = Cells(Lr, "A").Value + 1
End If
End Sub
This adds 1 to the previous cell and displays in the next available cell.
How could I make it sao that when this number enters in the cell it hyperlinks automatically to the master file?
Before this button was introduced I used this:
Private Sub App_WorkbookBeforeSave(ByVal Wb As Workbook, ByVal SaveAsUI As Boolean, Cancel As Boolean)
On Error GoTo Err_App_WorkbookBeforeSave
Dim hl As Hyperlink
For Each hl In Me.Hyperlinks
If Wb.FullName = hl.Address Then
Application.EnableEvents = False
Cancel = True..............
View 9 Replies
View Related
May 15, 2008
I have an lock button to lock a worksheet, and a unlock button to unlock the same worksheet.
The unlock button though gives me an error when I don t set the password correct or not at all.
My code is like that
Sub UnlockSheet()
'
' Unlock Sheet Makro
'
'
ActiveSheet.Unprotect
End Sub
I am sure that is very simple for you guys here but for me a problem I can not figure out yet why.
View 9 Replies
View Related
Mar 25, 2014
I'm getting a #Value Error when i enter the following formula
=VLOOKUP(BF$17,"'"&B19&"'!"&"A10:N200",4,FALSE)
BF$17 is a number that stems from a date variable i'm looking for. B19 is a text field with the worksheet name in it.
View 3 Replies
View Related
Jun 2, 2014
I am creating a worksheet that needs to input information from other worksheets that have not been created yet. I will be using this to input information as time goes on (monthly); however when trying to create the cell, I get a message that says "a formula in this worksheet involves one or more invalid references. Verify that your formula contains a valid path, workbook, range name, and cell reference." The worksheets I am trying to reference will be created eventually, but I want a formula that will not have to be updated monthly and I can just use it to roll over month to month.
My current formula looks as such:
=IF((IF($A$2=1, '[2014 Corp Engineering Project Codes.xls]Period 1'!$A13, 0))
(IF($A$2=2, '[2014 Corp Engineering Project Codes.xls]Period 2'!$A13, 0))
(IF($A$2=3, '[2014 Corp Engineering Project Codes.xls]Period 3'!$A13, 0))
[Code] ........
I have up to 'Period 6' created so far, the error highlights 'Period 7'.
View 3 Replies
View Related
Mar 26, 2007
I'm trying to create a simply loop for an easy task of copying and then pasting a formula into other cells. Basically I'm trying to get this script to run until there is no more "slsperson" references to go to.
Sub z_Paste_Sales_Formula()
Dim i As Long
Dim icolumn As Integer
icolumn = 4
Cells(3, icolumn).Select
Selection.Copy
i = 1
Do
Application.Goto Reference:="slsperson" & i
ActiveCell.Offset(1, 0).Select
sls_row = ActiveCell.Row
ActiveCell.Offset(1, 0).Select
gp_row = ActiveCell.Row
Cells(sls_row, icolumn).Select
ActiveSheet.Paste
Number = i + 1
Loop Until Application.Goto Reference:="slsperson" & number = error
End Sub
View 9 Replies
View Related
Jan 13, 2008
I have aproblem when I try to reference another sheet in a formula. I had it in my 2003 version, upgraded to 2007, and it is still there.
I want to make a reference to cells in another sheet - using them to multiply with a number in the sheet I am working on ....
I write "=(Sheet)(cellreference)" [just to see if the number actually ends in the sheet I am working on]
- Sheet by going to the sheet and marking the cell and then press return.
When I do this Excel responds with erronous behaviour and at least does not go back to the initial sheet and provide me with the number from the referenced Sheet/Cell. Some times I receive an error message about circular reference problems ....
View 9 Replies
View Related
Nov 4, 2011
ToggleButton? I have made this Macro work
Sub group()
'
Dim i As Integer
Sheets("Operating Income Trending (LOC)").Select
For i = 53 To 2 Step -1
If Cells(7, i) = "" Then
Sheets("Operating Income Trending (LOC)").Columns(i).EntireColumn.Hidden = True
End If
Next i
End Sub
And when i tried to put it into a togglebutton like below:
Private Sub ToggleButton1_Click()
Select Case ToggleButton1.Caption
Case "Group"
Dim i As Integer
Sheets("Operating Income Trending (LOC)").Select
[Code] .........
Then instead of hiding all the blank columns, it hides almost all the columns, leaving some that are supposed to hide. i could not figure out why as it worked fine as individual macro.
View 2 Replies
View Related
Mar 2, 2014
This formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
View 2 Replies
View Related
Jul 14, 2014
I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.
[Code] ....
Which is giving error .
superscript.xlsm‎
View 3 Replies
View Related
Dec 5, 2012
When I open my Excel workbook, I get the following error:
Removed Feature: External formula reference from /xl/externalLinks/externalLink1.xml part (Cached values from external formula reference)
I am asked if I want to recover the contents of the file.
View 1 Replies
View Related
May 15, 2007
I get a weird message every time I open Excel.
Error Number = 91
Error Discrp = Object variable or With block variable not set
You may have to manually set a reference to the ]VBIDE = VBE6EXT.OLB]
Not sure what this means or how it happened, but I know nothing about Code.
--> I am curious if maybe it has something to do with another weird instance I've had on all my Microsoft apps lately: Usually I can highlight text and press backspace to delete - or just type over the highlighted text to delete it. Now, when I highlight and press delete, nothing happens. If I highlight and try to typeover the highlighted text, it just adds my new text in front of the highlighted. --- Doubtful that both are related other than they are both really annoying every day.
View 6 Replies
View Related
Jun 12, 2007
Im getting an "Invalid or unqualified reference" error from this sub.
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
If ("C5") > ("b5") Then .Select ("C5")
Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End If
End Sub
View 9 Replies
View Related
Jan 10, 2014
Why I receive a 400 error when the 'excel close' button is pressed in the attached sample.
View 2 Replies
View Related
