I have aproblem when I try to reference another sheet in a formula. I had it in my 2003 version, upgraded to 2007, and it is still there.
I want to make a reference to cells in another sheet - using them to multiply with a number in the sheet I am working on ....
I write "=(Sheet)(cellreference)" [just to see if the number actually ends in the sheet I am working on]
- Sheet by going to the sheet and marking the cell and then press return.
When I do this Excel responds with erronous behaviour and at least does not go back to the initial sheet and provide me with the number from the referenced Sheet/Cell. Some times I receive an error message about circular reference problems ....
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
I am creating a worksheet that needs to input information from other worksheets that have not been created yet. I will be using this to input information as time goes on (monthly); however when trying to create the cell, I get a message that says "a formula in this worksheet involves one or more invalid references. Verify that your formula contains a valid path, workbook, range name, and cell reference." The worksheets I am trying to reference will be created eventually, but I want a formula that will not have to be updated monthly and I can just use it to roll over month to month.
My current formula looks as such: =IF((IF($A$2=1, '[2014 Corp Engineering Project Codes.xls]Period 1'!$A13, 0)) (IF($A$2=2, '[2014 Corp Engineering Project Codes.xls]Period 2'!$A13, 0)) (IF($A$2=3, '[2014 Corp Engineering Project Codes.xls]Period 3'!$A13, 0))
[Code] ........
I have up to 'Period 6' created so far, the error highlights 'Period 7'.
I'm trying to create a simply loop for an easy task of copying and then pasting a formula into other cells. Basically I'm trying to get this script to run until there is no more "slsperson" references to go to.
Sub z_Paste_Sales_Formula() Dim i As Long Dim icolumn As Integer icolumn = 4 Cells(3, icolumn).Select Selection.Copy i = 1 Do Application.Goto Reference:="slsperson" & i ActiveCell.Offset(1, 0).Select sls_row = ActiveCell.Row ActiveCell.Offset(1, 0).Select gp_row = ActiveCell.Row Cells(sls_row, icolumn).Select ActiveSheet.Paste Number = i + 1 Loop Until Application.Goto Reference:="slsperson" & number = error End Sub
Error Discrp = Object variable or With block variable not set
You may have to manually set a reference to the ]VBIDE = VBE6EXT.OLB]
Not sure what this means or how it happened, but I know nothing about Code.
--> I am curious if maybe it has something to do with another weird instance I've had on all my Microsoft apps lately: Usually I can highlight text and press backspace to delete - or just type over the highlighted text to delete it. Now, when I highlight and press delete, nothing happens. If I highlight and try to typeover the highlighted text, it just adds my new text in front of the highlighted. --- Doubtful that both are related other than they are both really annoying every day.
Im getting an "Invalid or unqualified reference" error from this sub.
Private Sub CommandButton1_Click() Application.ScreenUpdating = False If ("C5") > ("b5") Then .Select ("C5") Selection.Interior .ColorIndex = 6 .Pattern = xlSolid End If
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004 The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
how to make the average,median,max, and/or min functions ignore cells in the referenced range that contain the #value! error? All four of the functions are returning #value! because one or more in the referenced range have the error.
However, when I try this with a different formula =IF(ISNUMBER(SEARCH(C2,H2)),"REPEAT","SAFE"), I'm getting a compile error: Expected end of statement with this code:
The error message highlights the word REPEAT. I suppose it's something with all the quotes throwing off where compiler thinks the end of the formula should be.
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button Private Sub EPConversionButton1_Click(ByVal target As Range) Convert_Hrs_EP target End Sub And here is the subroutine.
Sub Convert_Hrs_EP(target As Range) End Sub There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
I've been testing the countif function and for some reason it isn't working for me.
I have the following text in cells A1:A3 "apple" "banana" "peach"
I have the following text in cells C1:C3 "apricot" "banana" "grape"
I put the following formula in B1 and copied down into B2 and B3. =COUNTIF($C$1:$C$3,A1)
It is meant to count how many of each fruit in A1:A3 is also in C1:C3. The banana is the only one that is in both lists so the formula in B2 should return 1.
But all three formula's return zero.
If I change the range in the countif formula to relative it works. eg., =COUNTIF(C1:C3,A1)
I have written the following VBA Script but am getting an error message saying -> "Compile Error. Invalid Next control variable reference".
Code:
Sub Form1() 'Change Yes/No Dim bottomT1 As Integer bottomT1 = Sheets("Data Sheet").Range("T" & Rows.Count).End(xlUp).Row Dim bottomP2 As Integer bottomP2 = Sheets("Follow-Up").Range("P" & Rows.Count).End(xlUp).Row Dim bottomO2 As Integer bottomO2 = Sheets("Follow-Up").Range("O" & Rows.Count).End(xlUp).Row
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
I am trying to create a pivot table on a new sheet names as 4x4
I am getting following error:
Error : 1004 Reference Not Valid
I am not sure where is the problem. I have generated this code by using macro recorder and just changed the source and destination of the pivot generation code.
i am trying to do a sum of my columns but it's not calculating at all.I keep getting "circular reference in an open workbook" error. This is the only workbook opened.
I have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use =COUNTIF("Attendance!C9:Z9", "Present"), and the next date comes along the formula changes to =COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code: =COUNTA(ABC!A:A) What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB ABC CDE
And have a formula in column B that converts this to
=INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),MATCH(B1,INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),,1),0),MATCH(A1,INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),1,),0)) Where A1= "M16" and B2= "185%RPIT630" 'Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5=QxTermAge63 Can some on tell me why this is raising a Circular Reference!!
