I'm getting a #Value Error when i enter the following formula
=VLOOKUP(BF$17,"'"&B19&"'!"&"A10:N200",4,FALSE)
BF$17 is a number that stems from a date variable i'm looking for. B19 is a text field with the worksheet name in it.
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
View 7 Replies View RelatedI am creating a worksheet that needs to input information from other worksheets that have not been created yet. I will be using this to input information as time goes on (monthly); however when trying to create the cell, I get a message that says "a formula in this worksheet involves one or more invalid references. Verify that your formula contains a valid path, workbook, range name, and cell reference." The worksheets I am trying to reference will be created eventually, but I want a formula that will not have to be updated monthly and I can just use it to roll over month to month.
My current formula looks as such:
=IF((IF($A$2=1, '[2014 Corp Engineering Project Codes.xls]Period 1'!$A13, 0))
(IF($A$2=2, '[2014 Corp Engineering Project Codes.xls]Period 2'!$A13, 0))
(IF($A$2=3, '[2014 Corp Engineering Project Codes.xls]Period 3'!$A13, 0))
[Code] ........
I have up to 'Period 6' created so far, the error highlights 'Period 7'.
I'm trying to create a simply loop for an easy task of copying and then pasting a formula into other cells. Basically I'm trying to get this script to run until there is no more "slsperson" references to go to.
Sub z_Paste_Sales_Formula()
Dim i As Long
Dim icolumn As Integer
icolumn = 4
Cells(3, icolumn).Select
Selection.Copy
i = 1
Do
Application.Goto Reference:="slsperson" & i
ActiveCell.Offset(1, 0).Select
sls_row = ActiveCell.Row
ActiveCell.Offset(1, 0).Select
gp_row = ActiveCell.Row
Cells(sls_row, icolumn).Select
ActiveSheet.Paste
Number = i + 1
Loop Until Application.Goto Reference:="slsperson" & number = error
End Sub
I have aproblem when I try to reference another sheet in a formula. I had it in my 2003 version, upgraded to 2007, and it is still there.
I want to make a reference to cells in another sheet - using them to multiply with a number in the sheet I am working on ....
I write "=(Sheet)(cellreference)" [just to see if the number actually ends in the sheet I am working on]
- Sheet by going to the sheet and marking the cell and then press return.
When I do this Excel responds with erronous behaviour and at least does not go back to the initial sheet and provide me with the number from the referenced Sheet/Cell. Some times I receive an error message about circular reference problems ....
This formula might be the problem for the error message.
SUMPRODUCT((MOD(COLUMN(C3:CO3)-COLUMN(OFFSET(C3:CO3,,,1,1)),3)=0)*C3:CO3)
I have other cells with the same formula (but with different range i.e. D3:CP3), yet it doesn't have circular reference error message.
I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.
[Code] ....
Which is giving error .
superscript.xlsm
When I open my Excel workbook, I get the following error:
Removed Feature: External formula reference from /xl/externalLinks/externalLink1.xml part (Cached values from external formula reference)
I am asked if I want to recover the contents of the file.
I get a weird message every time I open Excel.
Error Number = 91
Error Discrp = Object variable or With block variable not set
You may have to manually set a reference to the ]VBIDE = VBE6EXT.OLB]
Not sure what this means or how it happened, but I know nothing about Code.
--> I am curious if maybe it has something to do with another weird instance I've had on all my Microsoft apps lately: Usually I can highlight text and press backspace to delete - or just type over the highlighted text to delete it. Now, when I highlight and press delete, nothing happens. If I highlight and try to typeover the highlighted text, it just adds my new text in front of the highlighted. --- Doubtful that both are related other than they are both really annoying every day.
Im getting an "Invalid or unqualified reference" error from this sub.
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
If ("C5") > ("b5") Then .Select ("C5")
Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End If
End Sub
If I have a cell that has as its contents as sheet name, is there anyway I can use the cell's address to reference that sheet?
As an example, say I have in Sheet1, cell A1, the text Sheet2. And let's say I want to return the value of cell B2 on whichever sheet the text of A1 says. So, on Sheet1, I might have this:
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
when i did the macro recorder, it seemed to work.
how to make the average,median,max, and/or min functions ignore cells in the referenced range that contain the #value! error? All four of the functions are returning #value! because one or more in the referenced range have the error.
View 9 Replies View RelatedI am having problems in Excel 2007 using hyperlink formula to jump to a different worksheet in the same workbook.
Filename: Model Variables.xlsx
Worksheet to seek: Org Structure
Cell to seek: A1
Formula tried: =HYPERLINK("[Model Variables.xlsx]Org Structure!B4", "My Cell on different sheet")
Error: Reference is not valid
I was able to get VBA to post this relative reference, which sticks the formula
=DATE(YEAR($D2),MONTH($D2)+6, DAY($D2)+1) into a cell in Col J.
All fine and dandy, works as it should with this formula.
Code:
.Cells(Row, "J").FormulaR1C1 = "=DATE(YEAR(RC4),MONTH(RC4)+6, DAY(RC4)+1)"
However, when I try this with a different formula =IF(ISNUMBER(SEARCH(C2,H2)),"REPEAT","SAFE"), I'm getting a compile error: Expected end of statement with this code:
Code:
.Cells(Row, "I").FormulaR1C1 = "=IF(ISNUMBER(SEARCH(RC3,RC8)),"REPEAT","SAFE")"
The error message highlights the word REPEAT. I suppose it's something with all the quotes throwing off where compiler thinks the end of the formula should be.
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button
Private Sub EPConversionButton1_Click(ByVal target As Range)
Convert_Hrs_EP target
End Sub
And here is the subroutine.
Sub Convert_Hrs_EP(target As Range)
End Sub
There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
I am trying to do Vlook up but the reference cell indicates formula error even if this has values.
I have to do F2 in every cell to make the Vlookup work. Is there any way to remove this?
I've been testing the countif function and for some reason it isn't working for me.
I have the following text in cells A1:A3
"apple"
"banana"
"peach"
I have the following text in cells C1:C3
"apricot"
"banana"
"grape"
I put the following formula in B1 and copied down into B2 and B3.
=COUNTIF($C$1:$C$3,A1)
It is meant to count how many of each fruit in A1:A3 is also in C1:C3.
The banana is the only one that is in both lists so the formula in B2 should return 1.
But all three formula's return zero.
If I change the range in the countif formula to relative it works. eg., =COUNTIF(C1:C3,A1)
I'm getting an N/A error on my MATCH formula.
I'm trying to match a cell reference, rather than a specific text or value.
Here is the syntax I used. MATCH(Cell,Table Array Name, 0)
I have made sure that the text matches exactly and the cell formats are the same.
I have written the following VBA Script but am getting an error message saying -> "Compile Error. Invalid Next control variable reference".
Code:
Sub Form1() 'Change Yes/No
Dim bottomT1 As Integer
bottomT1 = Sheets("Data Sheet").Range("T" & Rows.Count).End(xlUp).Row
Dim bottomP2 As Integer
bottomP2 = Sheets("Follow-Up").Range("P" & Rows.Count).End(xlUp).Row
Dim bottomO2 As Integer
bottomO2 = Sheets("Follow-Up").Range("O" & Rows.Count).End(xlUp).Row
[code].....
A1 refers to B1 which contains a number or #VALUE!
What could I use in A1 to return a number and if B1 = #VALUE!, a zero.
I have a spreadsheet that shows a large number of folks we had working in a particular division from Jan. 1st until now, 1800 +. Some of the folks are on the sheet twice due to having more than one role. The sheet lists last name, first name, skill description, pay rate, company they worked at...etc. Most of the folks on the list are not currently working but some are. I have another spread sheet that lists the folks that ARE currently working. I'm trying to see if there is a way to compare the two sheets, via a formula, that will be able to identify when the first name, last name, company name, and skill description are the same and then have those identified deleted from the first sheet.
View 14 Replies View RelatedI have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
I am trying to create a pivot table on a new sheet names as 4x4
I am getting following error:
Error : 1004
Reference Not Valid
I am not sure where is the problem. I have generated this code by using macro recorder and just changed the source and destination of the pivot generation code.
Why do I get the error: "Runtime error 1004: Cannot rename a sheet to the same name as another sheet, a reference object library, or a workbook referenced by Visual Basic"?
And how do I fix it? I have a macros that someone else made (thank you) and I need to make the macros create anywhere from 5-125 sheets based on the information added in sheet 1. How can I do this whe it stops me after 5 or so with the error above.
To get the content of cells in other sheets of the workbook you refer to the 'Name' of the sheet and write e.g.:
[Code] ....
However, I need to refer to the '(Name)' of the sheet rather than the 'Name', i.e. 'Sheet1' rather than 'Fruit', and I would like to do it in a formula not using VBA.
I have a spreadsheet, that I have been using for years to estimate jobs. I started learning excel, by building this sheet. It is still a work in progress, as am I. I am always trying to figure out ways to make my life simpler by making the sheet more intelligent. I would like to be able to go from one sheet, to another and click on a part name, which would return a value associated with that part name, to an additive formula on the first sheet, to build and assembly. And, eventualy build a parts list from it as well. For ordering parts.
View 7 Replies View RelatedSheet 2 contains my checking ledger and sheet 1 is my summary page that I would like to have show current balance from the ledger. Is there a way to reference a value from sheet 2 on sheet 1?
View 3 Replies View RelatedI am using a sumif function that will sum a reference off another sheet.
I want to use a cell in the current sheet(where the formula exist) to reference the target sheet.
Is this possible.
For instance:
I believe you have to use indirect for to have formula reference a sheet name
I have two sheets, "Win" & "Lose"
On "Win" sheet I have this function =sumif(indirect(J180)G1:G20,"room",E1:E20)
On cell J180 of "Win" tab will be "Lose". I am trying to have the formula reference J180 as part of the function and have it sum anything in the "Lose" tab that has the word "room" in it.
How do you reference a table on another sheet so that when you sort that original table it doesn't change the reference you made on that other sheet.
i know how to do this when i am referencing a cell. for instance if i am referencing a cell on sheet 5 and that comes out to something like =Sheet5!B2, i know that when i sort the data differently in sheet 5, that reference will know to change to =Sheet5!B18 or where ever that original reference ends up in this new sorting. but if I do =Table5[2] or something, and i sort that table differently, the reference will change to the new data in that cell and will not follow old reference through the new sort.