I want to print one sheet for each of the values in a page field drop-down. I can do this by supplying the values individually (code below) but would rather determine the list of values dynamically. Can this be done?
Private Sub pbPrintAll_Click() Dim cix As Integer Dim Ctrct As String cix = 3 While (Sheets("Database"). Range("B" + Trim(Str(cix))).Value <> "") ' Get value from database sheet Ctrct = Sheets("Database").Range("B" + Trim(Str(cix))).Value ' Set CurrentPage value Sheets("Customer P&L Pivot1"). PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = Ctrct ' Print formatted sheet Sheets("Customer P&L").PrintOut cix = cix + 1 Wend ' Reset Current Page value Sheets("Customer P&L Pivot1").PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = "(All)" MsgBox "Prints sent to printer." End Sub
I've created a pivot table and I'd like to index through each "value" in the page field and then copy the results to another sheet, one sheet per field returned.
I can't figure out if it's possible to index through the list though. Is it possible?
I have defined 2 pivot table report using the same master data. I wanted to default the page field in these reports. I notice that on refreshing the data, the pivot table page field updates with "All" instead of default one (if there is no data for the default page field). How do I fix this? I wanted to have the default page even though there is no data for that field in the master file.
I know in Pivot tbale we could add calculated field into the data ,but I fail to put the added in the "Page","Row" or the "Column". Eg. in the sheet of data,I have a column " DATE",but no column for year.Is it possible to add year in the "page" without adding anything into the "data" sheet?
Is there any way how you can change value in page field in pivot table using formulas? I know this can be done with couple of lines of VBA, but I need to create VBA-free excel file.
I have created a system where users input data from a report into a spreadsheet, and after input it is sent off to various other workbooks depending on what was entered. I.e. The user is inputting test data on a location in a region. The regions make up the workbooks, and each location is a worksheet (While I can think of better ways to organise the data changing this is not an option here).
When the macro encounters a location in a region that hasn't been entered before it adds a new sheet based off the name of the location in the region's workbook, and creates a new named range for that sheet.
I'm running a pivot table in the central workbook, and I want to add the new named range to the page field when I create a new sheet. This is what I don't know how to do. EDIT: To clarify, the page field is choosing between which worksheet(via named range) is being shown currently.
i have pivot table that has a field called "supp" is it possible to write a macro that will open up the "supp" drop down box select the first result .print the results of the pivot table. then goto the next selection in the same drop down box and print them results . repeat this until allresults have been printed.
when the pivot table is run weekly the results in the field "supp" will change
in my Pivot Tables page field i could have 20 results. 10 could be customer identification codes 5 material codes, 5 a different material code, i called "inter", and the rest supplier codes, example i05,i05/1,i05/2, fo1,f01/1,f01/2 are both material codes,
what i want to do is have a macro /macros to select and print groups as follows
1. (all) 2. inter 3 any containing the words i05 and f01 which includes i05/1 etc 4. then the rest
if any does not exsist ignor. if possilbe a macro for each or a drop down box to select
I have linked a graph to update from a pivot table. I would like to print a copy of a graph and pivot table for each item in the page field. Can a macro loop through each page field and print?Is there a way to send them to the printer all at once? (I noticed the printer hangs when manually printing page by page)
I've tried "view all pages of pivottable" but then I lose the view of the chart. I tried recording the events but the number of items in the page field changes with each data update and I'm not sure how to write code to accept this.
I am trying to write a list of pivot table page filter pivot items to the Immediate window - but only hidden items. The code below should do the job where the active sheet is a pivot table.
However when I change the page filter pivot items being hidden, the pivot items returned by the macro don't change. It seems to assume that all pivot items are hidden when in fact it may be only one or two. It will work though for pivot row items (pvt.RowFields) and pivot column items (pvt.ColumnFields) where the user changes them.
Does the pf.HiddenItems collection work for RowFields and ColumnFields but not PageFields? If so, is there a pivot field object that reliably holds hidden pivot items residing in the page filters?
Sub ListHiddenPageFilterPivotItems()
Dim wb As Workbook Set wb = ThisWorkbook Dim ws As Worksheet Set ws = wb.ActiveSheet Dim pvt As PivotTable Dim pf As PivotField Dim pi As PivotItem
I have a set of accounts (general ledger accounts) that the accounting group posts expenses to. every once in awhile a new account is added. This is captured through a pivot that i have built (sheet A).
on another sheet (sheetB) i want to display the accounts that are shown in the pivot so that i can forecast their future activity.
What i am trying to figure out is how can i make the list on Sheet B change when new accounts are added to the pivot on Sheet A (without simply referencing the pivot table making one cell equal the other)? I am not looking for a data validation pull down, i want a full list of the accounts.
I'm trying to create a Pivot table with various columns comparing information of executives from various Private Equity Firms. Some of the additional columns are Industry Specialty, Harvard Grad Year, My companies contact, etc . . .
The goal is to allow me to then query this information so if I wanted to see all Bain Capital employees who graduated with an MBA in 1990 and their specialty.
My question comes in trying to set up my source list for the data under Industry Specialty and my companies Contact. Is there a way I can set a value for these cells and mark them as an "AND" in the source if there are multiple contacts or industries that one of the Private equity executives is linked too, that would then allow them to be displayed as so when I create the pivot table?
I'm trying to create what is essentially a report card for our staff. I have all the data in a pivot table and then I am using 'GETPIVOTDATA's in the report template to extract the information, linking the sheets via a cell that contains the staff members name. Easy enough. However for reasons of efficiency and practicality I would like to be able to select the names from a drop down list on the sheet rather than having to type it in manually or maintaining a separate sheet for everyone. The operators will change from month to month and there are approximately 90 staff at any given point in time that will need to be reported on so it really needs to be sourced from the pivot data.
I have a pivot table with a group # on the left, and team members on the right. There are multiple team members in each group, and each are on a separate line in the pivot table, like this:
Group #Team1chrisdawnsally2cassiechrisdawnkathysally3jimjoejohntomGrand Total
I need to find where "sally" is on the team (easy to do"), BUT I need to display the rest of the team members in the group with her, like this:
Group #Team1Sally, Chris, Dawn2Cassie, Kathy, Sally, Dawn, ChrisGrand Total
Using the concatanate function to put them all into one cell and then filtering for "contains" was all I could come up with, but there are 14,000 groups
Originally I considered posting in the Excel / Email area but I know how to automate the email part of this already once I get the data collection I'm looking for. Let me explain. I have a pivot table that consists of reps, accounts, items, and sales data in that order.
For each rep I want to create an email of affected accounts and items with thier respective sales data. Because each rep has a variable number of lines I'm having trouble defining the exact range. I've used a few pieces of code taken from various posts from this forum to start me off but nothing seems to be working, else I'd post what I already have.
The field list does not appear when I create a pivot table in Excel 2007. It works properly if I start Excel in safe mode. I have toggled the field list button in the PivotTable Tools show/hide ribbon and I tried repairing Office 2007 from the control panel.
I am trying to write code so I can control the PivotFields on a PivotTable from another sheet in the book. I cannot figure out how to get Excel to return a list of the fields in each page field. If I record code to change the Animal PivotField to show dogs, i get the following:
Im trying to create a 'drill-down' interface with the GETPIVOTDATA command.
I believe (but im not sure) that this will require several different formulas.
e.g., assuming this formula resides in A1, this returns all data in the pivot $A$6 for Monday of 6/1/2009:
=GETPIVOTDATA("Sum of Mon",$A$6,"Week", DATE(2009,6,1))
however for cell A1, if the user wants to drill down, then the required formula expands to the following..in this case we are drilling down to Name=Baby Becket/Ball, Stage=Infant..and so on..
=GETPIVOTDATA("Sum of Mon",$A$6,"Name","Baby Becket/Ball","Week",DATE(2009,6,1),"Stage","Infant","B/L","B","WL",)
Essentially, without writing a bunch of IF's in the formula for A1...is there a way to put these formulas in a lookup table, and then depending on what the user chooses on how they want to analyze the data (e.g., they may select Name, Stage, etc from a drop down list elsewhere on the sheet), the appropriate formula is populate in A1?
In a nutshell: Can the formula of a cell be changed depending on what the selection value is of another cell or list value?
This could probably been done easily via VBA, but if there is a formula or vlookup based solution that would be easier..
I have a huge data set with survey data (sample attached: sample.xlsx). Column headings: survey questions Row headings: respondent identifiers (names) Row data: answers to questions (numeric values, only five answer options 1,2,3,4 or 5, no blanks)
I need to build that kind of pivot table:
Rows - list of particular questions (i.e. questions no. 3, 7 and 12) Columns - list of all diffrent answer entries (eventually, it will be 1,2,3,4 and 5) - it could also be questions in columns and answers in row (no difference) Values - count answer entries (i.e. how many answers "5" are on quesiton 3)
------ UPDATE: explanation added.
The reason I need pivot tables: i'll have to cross analyze multiple sets of questions. I'll have to do such cross-analysis 100+ times, so, writing a formula for each time does not quite work...
I want to compare a hand entered data sheet to my system data. System data is exported in. Then that data is used to populate a pivot table. I use a lookup list that fills in matching data from my hand typed sheet. From there I want to use true/false to see if the data matches. However, the formula will not copy down. I am sure it has to do with the formula holding a value, but I can’t seem to correct it.
Recap 1.System data populates sheet 2.Pivot table pulls info I need. 3.Lookup list cross references hand entered data sheet and puts value next to pivot table. 4.I need to do a true false to see if data matches but can’t get it to work
Example worksheet: On the worksheet you can see that the true false statements are incorrect. The system data and the hand entered data match two times not once.
Is it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.