I'm creating some userforms for a spreadsheet on Excel 2003 and was wondering if it is possible to have the date field and time field as drop down boxes?
I would ideally like the date field to have 3 drop down boxes (date, month and year) and then the time field to have 2 drop down boxes (hours (in 24 hour time) and minutes).
The date and time would then populate one cell each on the spreadsheet.
I have to analyze our abandoned calls for the year. So far there are close to 2000 abandoned calls and I need analyze them according to the month and the time they were received.
I have two worksheets in my workbook the first worksheet is named DROPPED, this is were all the data is. The second worksheet is called DROPPED CALLS SUMMARY, this is where all the analysis happens.
On the DROPPED CALLS SUMMARY Worksheet I need to have the Sum of Column I IF ColumnA is equal to Jan-13(or whatever month) and Column B is equal to 8:00 AM (or whatever time). I'm using Excel 2003 so I cannot use the SUMIFS Formula and I can't find a formula to work with.
A
B
C
D
[Code]....
I want a drop down calender to choose date from and found that i can use More Controls> "microsoft Date and Time Picker 6.0 (SP4)" for excel 2007 but it doesn't work with other excel and shows a "x" not recognised in some other machines.
View 1 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
New user with basic knowledge faced with a multi-part challenge.
I have a list of 10 items (multiple words) in a drop down
Based on what is selected in the drop-down, I am trying to figure out the best way for it to pull the corresponding text paragraph. This would then be concatenated with a numerical value inputed b the user in another cell. The final output would be displayed in a final cell.
I have figured out how to concatenate between one cell and the other cell with the paragraph but I am at a loss for how to make it more dynamic in the sense that the drop down selection drives the paragraph being selected and then taking the value in cell A1 to concatenate within that paragraph and outputting the final text to be copied out from excel.
I tried looking at posts for dependent data verification and I felt like I was on the right track but hit a wall.
Excel 2003
I would like to be able to limit a drop down list's contents based on a user's selection in a different drop down. I am using Excel 2003, and I know how to do this in Access, but I can't figure it out in Excel. Basically, I have a list of themes in one drop down. The user picks a theme, and goes to a second drop down which is a list of sub-themes attributable to that one theme and no other theme.
View 1 Replies View RelatedI am working on a time table worksheet and I need to insert a time Offset that can range from 5 minutes to an hour with 5 minute increments. The message box or user form will prompt, "How long is your Offset:"
The problem is that I only know how to do make a drop down list that is populated from cells on a sheet. Do I have to use a user form?
How do you create a reference number to be posted in a userform2 that is opened from an earlier userform1 where you have entered some initialisation data and generated a source reference number. ie set of data has reference X and there will be y items in that set want references in form X01 to Xy (y unlikely to exceed 20). Want to put references 'X01' into the userform2 and cycle through data entry in userform2 from source reference X01 to Xy. (I'm having problems with the transfer from 1 to 2!)
View 2 Replies View RelatedCell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
The code below adds the date to D:D once the user enters data in B:B and then adds the time when the user selects from a dropdown in C:C. When they have finished the task they enter anything into F:F and then it enters the end time in G:G.
This works well except for one flaw and one modification that I can't get to work. I have found that people retrospectively change the activity in C:C which causes the start time to change. I would like to avoid this hapenning if possible by putting some code in to stop this. Also I would like the times to be related to the push of a button on the sheet and therefore need different code.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("B2:B900")) Is Nothing Then
With Target(1, 3)
.Value = Date
[Code] ......
I am creating an invoice form in Excel 2003. I like to know if it is possible to increase the value of cel A1 by one everytime a new sheet is created.
For example i created my first worksheet and gave an invoice number 001. Now I create a new worksheet by right clicking on the tab and choose copy/move. I like the second work sheet change the invoice number to 002.
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
Now iam Working in excel 2003, I got a Requirement that, After Downloading datas From SAP, It Directly Stored in Excel Sheet , Using tht Sheet1, I need to rename all the Filenames at a time, Is It possible, Any code is there to rename,
For Example,
From SAP to Excel Sheet Datas are Like this in Sheet1,
DmsNo Filename
50007685 SDFFG.jpg
50004678 HGJKID.jpg
50003421 VGFTHR.jpg
Then i have rename that filename, rename 'SDFFG.jpg' To '50007685.jpg', and it Should be directly rename to my Source File.
For Example:
Source File: C: estSDFFG.jpg
After renaming it Should be,
Source File: C: est50007685.jpg
any code is there to rename,
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I'm working on a dynamic payroll spreadsheet that will automatically calculate the overtime worked in a week. Right now, I'm running into a snag. My issue is with the formula in Column R. Right now, as shown below, it is doing the calculation based on regular hours minus 40 to determine the OT time. The snag is very messy and it lay in this: while the row by row calculations for total overtime worked for the week is correct, the sum at the bottom is very much off. I need an accurate method to sum the hours of overtime for the given column.
Here are the guidelines for the pay periods and overtime:
1. The pay periods for the month go from the 1st to the 15th and the 16th to EOM (End of Month). This means that the pay period could end on any given day of the week. More on this in a moment.
2. A work week is defined as Sunday to Saturday.
3. Overtime is calculated based on the rule of anything over 40 hours in a given work week.
4. Holiday hours worked do not count towards the 40 hour mark in granting overtime since Holiday pay is automatically overtime.
If it were just a matter of a bi-weekly (every 2 weeks) pay period, I would simply state =IF(weekday(DATE)=7,Hours_Worked - 40,0), and tag a SUM(range) at the bottom. Unfortunately, with it being a semi-monthly (twice a month), the end of the pay period could be a Wednesday, so a reference to day of the week won't work unless the formula can dynamically determine which set of data to evaluate.
I'm completely willing to toss out the current method of determining overtime. This is the calculations sheet that references a cleanly formatted and designed time card on a tab called "Time Card", so this isn't the full workbook. In fact, once the whole thing is done, this calculation sheet will be hidden.
Columns M and N (which are formula referenced in Column P) are basic End - Start calculations and were hidden to simplify the display as well as the number of formulas displayed.
Column L (formula referenced) is a Yes/No display for if the date in question is holiday pay.
Excel 2003
H
I
O
P
Q
R
S
1
Start Work
Time Out
Day Count
[code].....
Looking for a macro in Excel 2003 that will open a pop up box so that the user can enter a date to search for within the spreadsheet.
View 6 Replies View RelatedI am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value
cboTypeofContact.Text = Cells(lCurrentRow, 3).Value
DateofContact.Text = Cells(lCurrentRow, 4).Value
TimeofContact.Text = Cells(lCurrentRow, 5).Value
End Sub
I am not sure what to put in its place.
I have several textboxes on a UserForm that must have both dates and times to calculate a time difference. I need a way to validate input to [mm/dd/yyyy hh:mm].
View 2 Replies View RelatedHere is the code for my user form.
Private Sub UserForm_Initialize()
TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I have a very basic understanding of excel, I mean BASIC, for my work I have multiple dates for vehicles to go in for inspections. I would like the cells to change colours when within 30 days, 10 days and 5 days. I'm on a work excel 2003.
View 6 Replies View RelatedI need a function to work out what the date will be 45 WORKING days after today(), this function needs to exclude Saturdays, Sundays and any Public Holidays i.e. there could be either 10 or 12 weekend days added into the calculation depending on when today() is plus any additional Public Holidays.
I am using Excel 2003 although it will need to work in Excel 2010 shortly.
I'm using Microsoft Office 365 Home Premium. Although this file is saved with Excel 97-2003 - because the computers at work only use 2003.
OK - Here is my dilemma. I've been creating a spread(work)sheet for work. One of the fields that needs to be entered by the manager doing the papwerwork is 'Date'. I currently have the Data-Validation set as follows because the paperwork being done is for the yesterday:
Code:
=TODAY()-1
I have the Error Alert set to Warning prompting the manager to ensure the date is correct (sometimes a mid-shift audit is being done, so the actual current date has to be used). Now, what I am wanting to do is to also set it that if the manager set's the date for a future date, I would like Excel to also either do a Warning or a Critical displaying a message that future dates cannot be used.
I know this may sound trivial, but with this paperwork, dates are extremely critical and vital in the event of an investigation for cash shortages etc.
I have uploaded the excel sheet to my domain, which I can provide a link to - either here or in a private message - but I do not want to do so unless I know that it's ok to do. If so, I will reply with a link to the location of the Excel file.
I have a cell (A1) which contains the month. A2 contains the year. I need a formula which will return each date of the month.
View 7 Replies View RelatedThe following formula works perfectly in Excel 2003:
=SUMPRODUCT((A2:A10="A")*(b2:b10="B")*(c2:c10="C"))
However, I've got a fourth column that contains either a date or a blank cells; I want to limit the formula to only include certain dates in the sum. i.e:
=SUMPRODUCT((A2:A1000="A")*(b2:b10="B")*(c2:c10="C")*(d2:d10>="01/04/2014"))
Rather than an error it's just retuning an incorrect number.
I want to use a formula, in another cell, to convert "Friday, 30 May 2014, 3:47:16 PM" to a value. I am using Excel 2003.
View 2 Replies View RelatedI am using Excel 2003. I have attached a data file here. getting the values in Q3, R3 and S3.
Scenario:
Q1 has the number = 1. So I want the cell Q3 to return 2/11/2013 as that is the cell corresponding to the Item1 (value specified in P3) with the value 1(value specified in Q1) in the cell. Basically, I need the date corresponding to cell which has the value of Q1 for the value of P3.
Similarly, R2 must have the value 2/12/2013 and S3 must have the value 2/14/2013 returned.
I am looking for a formula for a date.
I want the cell and column to highlight when the date has arrived, and I want it to remain highlighted for 7 days.
I have got as far as =F1=TODAY()
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change()
TextBox1.Value = DTPicker1.Value
End Sub
The initialize userform code uses the following to format and set the textbox
Code:
TextBox1.Value = Format(Date, "dd-mmm-yy")
TextBox1.Value = ""
Windows 7 with Excel 2010