Userform Date And Time Validation
Aug 1, 2006I have several textboxes on a UserForm that must have both dates and times to calculate a time difference. I need a way to validate input to [mm/dd/yyyy hh:mm].
View 2 Replies
ADVERTISEMENT
Date/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm
Jun 17, 2006I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
Userform Validation If Date Is Within 2 Weeks Of Today Date
Mar 19, 2014I am setting up some validation on my userform. In this case if a user enters a date within two weeks of todays date they will not be able to proceed onto the next page.
Example: Todays date is 19/03/14. If a user enters 25/03/14 into 'TxtDate' they will not be able to proceed.
[Code] ......
VB Userform Date Validation?
Feb 25, 2014I have a input box in a userform that I am trying to force the user to put in a valid date(mm/dd/yyyy or mm/dd/yy which is changed to mm/dd/yyyy). The code is below. When an invalid date is inputed by the user, for example 'abc' I get the error: Compile error: Label not defined. I would like a message box to pop up showing the user that a valid date needs to be inputted. What is wrong with the code to throw the compile error?
Private Sub ErrorDateBox_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
On Error GoTo ErrorHandler
Dim dDate As Date
[Code]....
Date And Time Picker On UserForm
Dec 24, 2008I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value
cboTypeofContact.Text = Cells(lCurrentRow, 3).Value
DateofContact.Text = Cells(lCurrentRow, 4).Value
TimeofContact.Text = Cells(lCurrentRow, 5).Value
End Sub
I am not sure what to put in its place.
Running Date And Time On Userform
May 30, 2007Here is the code for my user form.
Private Sub UserForm_Initialize()
TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
Excel 2003 :: Date And Time Dropdown Box On Userform
Mar 11, 2012I'm creating some userforms for a spreadsheet on Excel 2003 and was wondering if it is possible to have the date field and time field as drop down boxes?
I would ideally like the date field to have 3 drop down boxes (date, month and year) and then the time field to have 2 drop down boxes (hours (in 24 hour time) and minutes).
The date and time would then populate one cell each on the spreadsheet.
Convert Imported Date / Time Data To Date / Time Format?
Jan 2, 2013I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedSubtract A Static Date And Time From The Current Date And Time
Oct 24, 2007I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
Converting Text Date And Time To Serial Date And Time
Feb 21, 2013I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
Convert Date & Time As Text To Real Date & Time
Apr 22, 2008I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedUserform With Time Field Displays Time As Number
Dec 24, 2008I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
Using Userform To Calculate Time To Sheet From Start Time?
Jun 19, 2014I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies View RelatedExcel 2013 :: Extract Date And Time Info From A Text Cell That Contains Text And Date And Time
Jul 19, 2014I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
Date/time Macro: Inserts The Current Date And Time In The Selected Cell Regardless Of Where That Cell Is
Oct 20, 2009What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedAdd More Specific Validation To Userform?
Jul 1, 2014I'm attempting to add even more specific validation to a userform, because the current validation still isn't stopping users from entering incorrect data. I currently have my coding set to if the user chooses the selection Indirect, they will be unable to enter any data within the Over/(Short) Amount box. Only now I have run into the issue where users are entering in the value Direct, and NOT entering any amounts within the Over/(Short) Amount box. I want to add two more things to my validation.
1 - I would like to force the user to have to enter in a value if the selection Direct is chosen, and
2 - I would like to set the box to only allow numerical values within the box to avoid the user from being able to type in the words Over or Short.
Currently this is the code I have in place:
[Code]......
I would also like to know if it's possible to add code that would autopopulate another box I will be adding to the userform that will show Over or Short with Short being in Red depending on whether the number is positive or negative that is entered into the amount box. I've attached an example of the userform the user sees when they are entering in data.
Attached File : Direct - Indirect userform screenshot.xlsx
VBA Userform Textfield Sum Validation
Nov 11, 2013I have 3 text boxes from which at least one must contain a value. The sum of these 3 text boxes must be equal or smaller than the value in another text box. I have written the code but somehow my validation is not working always. Even though the sum is less than required I get the error. Something must be wrong with the code.
Code:
With frmManifest
If .txtNum1.Value > .txtRough.Value Then
MsgBox "Expected Recovery Value is greater than Rough Recovery Value. Please check your value.", vbExclamation
txtNum1.Value = ""
ElseIf .txtNum1.Value + .txtNum2.Value > .txtRough.Value Then
MsgBox "Expected Recovery Value is greater than Rough Recovery Values.
[Code] ...........
Userform Data Validation
Sep 27, 2008I have created a userform that has 8 text box's, I want to restrict the user to only enter a date in the following format dd/mm/yy.
View 9 Replies View RelatedConverting Date:Time Text To Date:Time Value
Oct 13, 2009I'm trying to write a VBA code for converting the date/time as text to a date/time value.
The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM
I could have the code working fine with the first two types, but not the last one.
Format Date & Time To Show Day, Date & Time
May 21, 2008I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30
After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
ListBox Validation On UserForm Not Working?
Jan 22, 2014I have a UserForm with Combo Boxes, List Boxes, Text Boxes etc. When the OK button is clicked I want it to ensure certain fields are not left blank and notify the user (see code below). This works great for the combo boxes but not for list boxes. It seems to skip over that code. In other words, in the code below, if a manager is not selected, it doesn't notify the user.
Private Sub OkButton_Click()
'Verify fields are not left blank
If cboAgent.Value = "" Then
[Code]....
ComboBox Validation: Check Values Before Closing UserForm
Sep 5, 2006I have a userform with 15 Combo boxes & I would like to make sure all the enabled combo boxes (some may be disabled) have a value > 0 (Zero) before exiting the userform.
View 5 Replies View RelatedLookup Sunset Time Based Onrecord Date - Incorrect Time Calculated
Mar 22, 2012Consider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
Excel 2010 :: Insert Date And Time In Column Upon Data Change For First Time Only
May 3, 2013I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
Macro Button Disabled When Workbook Date / Time Created Different Or More Than Time Set
Mar 7, 2014I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
Excel 2013 :: Separate Time From Date To Sort Time Frames Over Multiple Days?
Jun 17, 2014I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
Enter Time As 1800 Get Back Date And Time As 9/9/2012 06:00 Pm
Sep 9, 2012I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies View RelatedSplit Date & Time Cell & Format Time As Hundreth Of Second
Sep 6, 2006I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
Data Validation Doesn't Work When Worksheet Populated From Userform?
Feb 21, 2014I have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.
View 3 Replies View RelatedMerge Date And Time Columns Without Loosing Time?
Nov 25, 2006I would like to merge a colum with a date and a column with a time into one to show DD/MM/YYYY HH:MM
I have tried merge cells and it takes out the time and leaves the date only.