TextBoxDate.Value = Now
TextBoxDate = Format(TextBoxDate.Value, "dd mmmm yyyy hh:mm:ss")
End Sub
This is a form to have employees punch in/out. The form is designed to be running all the time. The TextboxDate is disableed so the user can not change it.
I would like to know if it is possible to get the time to be displayed on the form constantly? Right now it only updates when the OK button is pressed on the form.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have created a software on a userform and have copied contents of this userform to worksheet cells. However when I run it for the first time everything works and all contents goes in C4 - C8. However when I run it for the second time the contents in C4 - C8 deletes itself and new data appear i.e. the cells are overwritten.
In cell C3 i have the date and I have managed to put this date in the next empty column everytime the software is run. I do not understand why the dates can go to the next empty column without it being over written but cells C4 - C8 cant!
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value cboTypeofContact.Text = Cells(lCurrentRow, 3).Value DateofContact.Text = Cells(lCurrentRow, 4).Value TimeofContact.Text = Cells(lCurrentRow, 5).Value End Sub I am not sure what to put in its place.
I have several textboxes on a UserForm that must have both dates and times to calculate a time difference. I need a way to validate input to [mm/dd/yyyy hh:mm].
I'm creating some userforms for a spreadsheet on Excel 2003 and was wondering if it is possible to have the date field and time field as drop down boxes?
I would ideally like the date field to have 3 drop down boxes (date, month and year) and then the time field to have 2 drop down boxes (hours (in 24 hour time) and minutes).
The date and time would then populate one cell each on the spreadsheet.
My manager wants me to create a userform that will populate values from access database . I have done that and now he wants it to run always for the whole day everyday and the values should get updated automatically in the userform. There should be a timer event set that will run the userform automatically after few seconds.
I know this may have been answered before but I didn't really understand those answers and my scenario is slightly different. I have a UserForm that I am asking people to enter data into. One part of the UserForm asks for a percentage spread across an age range. For example for the age ranges 16-20, 21-25, 26-30 (etc) whats the percentage of smokers. This will obviously then add up to 100% which I want to put in a ' total' box at the end of the line of input boxes. I want this box to be updated whenever someone enters a percentage into the boxs but I can't seem to work out how to do it. That's basically what I'm asking help for on. Its easy enough when doing it on the spreadsheets themselves with the SUM function but how can I do it on a UserForm. Does it need some complex VB coding?
I am copying web data into Excel and need a creative way to run a couple formatting macros on the data. I’m looking for the best way to initiate the macros. I cannot use command buttons because they’ll get deleting as a result of the line “DrawingObjects.Delete”.
I’d like to use a Useform with a couple buttons but am not sure how to have it automatically display when needed and hidden when not needed. I also prefer not using toolbars button unless they will only be displayed in that workbook and not any others.
I currently have a userform that runs a bunch of code for me. There are a lot of listboxes on the userform that have rowsources of various dynamic named ranges. I'm running into a problem when I have the used click the "Remove Item" button from the userform. Normally it is supposed to go back to the sourcerow and remove all of the cells that contain values that are selected in the listbox.
The code for removing the cells works just fine, however when it deletes a cell, for some reason the code executes a private sub that is in a different sheet. I can't figure out why and it's messing up my macro.
Here's the
FROM USERFORM:
Private Sub cmdAIRemove_Click()
For i = 0 To lbAISummary.ListCount - 1 If lbAISummary.Selected(i) = True Then For Each cItem In Worksheets("Lists").Range("YourAI") If lbAISummary.List(i) = cItem.Value Then cItem.Delete (xlUp) '<- right after this line it jumps to NWSMonth_Change i = i - 1 End If Next cItem End If Next i End sub...
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
when i use this code i wnat the date to automatically appear in the text box but it doesn't I have type something into the textbox then the current date appears,.
I am trying to sum a dynamic range of values, clear the range (ie. clear the numbers on the spreadsheet), then place the sum of all the numbers in the last cell in the user selected range. (essentially adding all values selected, placing final sum in the last row of the range, and leaving no trace of performing the routine)
I want the range to be selected during the userform running (using showmodal = false). I can sum the selection and write the value to a cell, but I can NOT write the cell to the last value in the selection.
I'm using a UserForm to inform the user that the program is still running. Unfortunately, when I do: UserForm1.Show the program hangs there until I hit the Ok button. How can I make the program run as the box is shown.
I have to append the cell value with a user input string in to the same cell. i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.
The issue that I have is with the cell selection within the code for the form.
For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on. How can I make ure the output is going to the same cell?
Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then
Dim MyForm As New UserForm1 MyForm.Show
Else
Exit Sub
End If
End Sub
'Code for the userform is below:
Private Sub CommandButton1_Click() If TextBox1.Text = "" Then
' the user input is mandatory MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field" TextBox1.SetFocus
Else
' append the cell value with user input in the text box '****issue is here in the next line ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")" Hide
I am trying to get running totals in three TextBoxes on a UserForm. The UserForm is to enter one item from a receipt which can have many items. The running total is for the number of items on the receipt, amount of discounts (coupons), amount of sales tax and the grand total. A small sample is attached
Here is the image 1 after selecting one of element in listbox and then if I click delete material (commandbutton).
It has to delete the select material in sheet 2 and has to cut the element below and move to 1 row above as shown in figure 2.
At the same time it has to delete the entire respective column and remaining column has to be cut and place in column before in sheet 3 as shown in figure 3
For that I had wrote the program which is below
Private Sub CommandButton5_Click() Dim i, j, k, m, n As Integer i = ListBox1.ListIndex j = Sheet2.Cells(1, 39).Value k = j - i
[Code] ....
When I click the delete commandbutton5 the result is as shown in figure below
In sheet2
In sheet 3
For loop is running only one time after that it got terminated. If I split the 1st for loop and execute it.it is running nice what I meant to do. If I combine another for loop or If I add msgbox at top it misbehaving. I tried with do while loop also it also doing same thing.
I have a macro that would run once the workbook is opened. This macro would then open another excel file to get updates then close it. Now this file is also being accessed by other persons in the network but just for a split second. Since an opened file would result into an error, what proper codes should I add so that if the file is currently in use, the macro would then run again after 5 seconds and would do the same thing until the file is ready? This is what I have so far. All in the standard module.
Sub Updater() Dim updatePath As String updatePath = Worksheets("Entries"). Range("E104") Application. ScreenUpdating = False Workbooks.Open (updatePath) On Error Goto Errorhandler Workbooks("APTupdater.xls").Close True Application.ScreenUpdating = True Exit Sub
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
I have a macro which downloads data from website. But takes some more time to complete a work. I want that a time should display at the bottom bar of excel where "Ready" is written. THe time should be in hh.mm.ss format.
I have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?