Excel 2007 :: Macro To Delete All Data Before Pasting In New Stuff
Nov 25, 2013
I am using Excel 2007 and have a simple enough macro to paste data in to another sheet - simple is what I do best.
Sub Macro1()
'
' Macro1 Macro
With Sheets("data")
.Range("B3").PasteSpecial xlPasteAll
End With
End Sub
I am wanting to change this so that before it pastes any data into B3 it will delete all data from B3:AE22.
I have had a look around and found plenty to delete full rows or worksheets but not just to delete the data in those cells.
View 8 Replies
ADVERTISEMENT
Jan 10, 2012
What i have is a workbook that can have multiple sheets. Sheet 2,3,4 (if there are) are a continuation of sheet 1. First 2 rows of sheet 1 are headers and the last row of the last sheet (can be 2,3, 4....) is a footer. There are 14 columns (A-N) in each sheet. Col "N" has set status and col I has set names.
What i am looking for is a macro that can perform the following actions in the the set order:
1) deletes all rows where status in col N is "closed"
2) delete all rows where name in Col I is "Many"
3) if there are multiple sheets copy all data in 1 sheet once above 2 are deleted
4) I want to update cell A2, C2, I2, M2 & N2 with Hostel, Direction,Name,Flight & Status respectively
5) Create a pivot table with all data (Col A-N & Row 2 to last) in a new sheet and call it Summary - Pivot
I can then manually select how the pivot will look
Currently i am going through all sheets manually and filtering data. Using excel 2007
View 9 Replies
View Related
Sep 21, 2012
I have a public/shared Excel 2007 workbook on our network and someone colored an entire column yellow. When that happened, it increased the number of rows to over 655,000. I didn't know that was posible but they are there... The thing moves very slowly now and when I try to delete (45,000 lines at a time), I either get a error window telling me I don't have resources to perform the operation, or I do smaller chucks and after 30 minutes deleting lines, it will not save.
I would rather not have to recreate the whole workbook if I can delete the lines on this one page.
View 9 Replies
View Related
May 28, 2012
I am using excel 2007 on a 64 bit windows 7 machine if that matters.
Anyways, I am trying to copy a range of cells from one workbook and then paste that range into another workbook, but ONLY on the visable rows in that notebook.
The first workbook has no hidden rows so I don't need to do any go-to specials to copy them, but the second one of course does have them.
This is a simplified example.
- Workbook 1 has column A with cells 1-10 with data in them that are going to be copied
- Workbook 2 also has a column A, but it has information in cells 1-15 with cells 6-10 hidden from view.
- The copied data from workbook one needs to only land on the visible cells (read: cells 1-5 and cells 10-15)
View 5 Replies
View Related
May 2, 2012
I'm working in Excel 2007 and need to move data from multiple rows to a single row if the ID matches.Below is sample data I would be working with. I want to move data from columns F-U to the right of the original data in the row above it. I would also like to delete the rows that had data moved.
GIDSurnameNameEmployee Number OriginalDate of birthGranting ARE
Employing ARECountry Employing ARECHCM Supplier IDVehicle
Investmt. shares / Awards at termination dateMatching Shares
at termination dateTermination
[Code]....
View 3 Replies
View Related
Jul 7, 2014
Currently I am using Excel 2007. I want to merge data of alternate row of a particular column in Excel.Also i want to remove merged row. E.g.
Name City Pincode
John Mumbai
John 400009
Carol Delhi
Carol 110001
Carol Pune
Carol 411079
I want output to be ----->
Name City
John Mumbai-400009
Carol Delhi-110001
Carol Pune-411079
macro/formula for the above requirement..?
View 11 Replies
View Related
Feb 28, 2012
I have a VBA macro for Excel 2007 below that loops through a workbook and deletes a picture (shape) in a range at the top of each worksheet.
The macro works fine until a cell which contains a seemingly unrelated data validation list on Sheets(1) is changed. The macro then repeatedly trips up with a 'Run-time error 1004 - Application defined or object defined error'.
The cell with the data validation is outside of the range in which the shapes are deleted and does not set any of the variables in the macro.
Sub DeleteLogos()
Dim Count As Integer
Dim NumberOfWorksheets As Integer
Dim Logo As Shape
Dim LogoZone As Range
NumberOfWorksheets = Worksheets.Count
For Count = 1 To NumberOfWorksheets
With Sheets(Count)
[code].....
View 4 Replies
View Related
Jul 7, 2009
i'm working on floyd algorithm macro for a project,
problem is, the spreadsheet matrix is huge, it's a 1043 x 1043 spreadsheet
And this is taking wayyy too long, i've been waiting for almost 2 days already..
here's the file :
http://ifile.it/6v2j39f
(You start the macro using "run" command in "input" sheet)
So is there any way to speed it up?
Or if anyone got a supercomputer, could you help me process this? :p
I'm thinking about changing the 10^5 value into infinite value, but i can't find a way to display infinite value..
And here's some reference for Floyd's algorithm,
http://ifile.it/12p5zle
I have tried to split the algorithm to make it process one iteration at a time, but i've been waiting like 2 hours with no result,
and that's for 1 iteration, can't imagine how long it takes for 1043 iterations
You can do this by deleting the.
View 14 Replies
View Related
May 5, 2014
I'm trying to update a the summary sheet that will run through the 10 worksheets and bring back the entire row (or the columns I specify) that matches the creteria MS.
MS will appear against each row in the same column in all the tabs.
So in the summary sheet I would see all the rows individually that appear in tabs 1-10.
Excel 2007.
View 9 Replies
View Related
Jan 11, 2012
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
View 5 Replies
View Related
Aug 20, 2013
I need a Macro that will search all of the cells for specific text, and delete all cells containing the text. I prefer to make a list of the specific texts and run macro to find all of them and delete all cells containing the text. I need to be able to add some more text into the list in future.
View 9 Replies
View Related
Aug 13, 2013
I have a large file with a bunch of color coding and need to delete my red rows only.
View 3 Replies
View Related
Apr 24, 2014
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
View 2 Replies
View Related
Jan 15, 2013
I have 10 pages of data in a word document.
Can i write a macro,
to copy Word Page1 in excel sheet1 cell(J2),
to copy Word Page2 in excel sheet1 cell(J3)
to copy Word Page3 in excel sheet1 cell(J4)
.
.
to copy Word Page10 in excel sheet1 cell(J11)
View 1 Replies
View Related
Dec 3, 2013
In any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
View 5 Replies
View Related
Jan 13, 2009
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies
View Related
Jan 11, 2012
I am using Excel 2007 and I created a table (i.e., listobject) using the macro recorder as follows:
Code:
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$3:$J$50"), , xlYes).Name = "MyData"
Questions:
1. How do I delete this table via VBA?
2. How would I check to see if this table already exists so it follows this logic:
If "table does not exists" then
'create it (using the line of code above)
End If
View 3 Replies
View Related
Oct 29, 2013
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
View 3 Replies
View Related
Jan 9, 2014
I have two spreadsheets. one contains a master list of computer names. the other contains a list of computer names to be removed from the master list (exception list).
I need to go through the master list and remove any computer names that are on the exception list- for example, if 'computer1' is in the exception list, i have to find and remove 'computer1' from the master list.
The exception list is quite long, and I want to automate this process if possible. not sure how to achieve this.
I'm using Excel 2007 Standard.
View 4 Replies
View Related
Jan 23, 2014
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
View 4 Replies
View Related
Oct 20, 2008
The following code deletes a specific connection in a workbook:-
ActiveWorkbook.Connections("text123").Delete
How can I code this so that I can delete ALL connections in a workbook without having to specify the names (as these will always be different).
View 3 Replies
View Related
Jan 23, 2012
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD
View 1 Replies
View Related
Aug 6, 2012
HTML Code:
Sub DeleteEmptyColumns2()
Dim Cell As Range
For Each Cell In Range("4:4")
If Cell = "0" Then
Cell.EntireColumn.Delete
End If
Next Cell
End Sub
I am attempting to remove columns in my table of data, using the above code seems to remove some them but not all, is this the best way to loop through a range?
View 8 Replies
View Related
Jun 14, 2013
Macro code to find several column names in row 1 (which can be anywhere in the work sheet) and delete them e.g. date, month, code, amount etc.......
Excel version 2007
View 4 Replies
View Related
Sep 14, 2013
I have switched from an ageing Mac Powerbook, Excel 2004 for Mac, and an out-of-date version of Firefox to an IMac with Excel 2011 for Mac and Safari as a browser. The only reason why I mention this is because I don't know if it was easier to do this on an older platform (one of those bizzare situations where going forwards is actually a step backwards).
In short I like doing things with Sports data in Excel. Usually I would hit my favourite website for pulling sports data (which incidentally I don't know if this has changed as I've been too busy to do much of this kind of thing for about 4 months - or if it is just a different format on a newer machine/different browser);
[URL] ....
The link should be showing NFL results for this year so far (I like the site as it has a handy amount of other sports etc.).
I would usually then go edit/paste special - unicode text and then hit the paste options, use the text import wizard, go delimited, tabs - and usually everything would come in on a row and then I could do what I need to do with it (e.g. use Excel's text functions to get the data - taking spaces out for example - to where I want it to do other things).
The problem I seem to be having now is that when I do the above - things no longer seem to come in on the same row (which makes life difficult for doing things easily with the data). Once things end up on different rows it becomes a pain to do basic things.
In short is there a way round this (or do I need to find another source for my data with tables laid out in a more friendly way to "borrow" data)?
View 9 Replies
View Related
Oct 3, 2011
I have written a sub with the purpose of finding rows based on a critieria, copying the rows to another worksheet and deleting the original row.
The code:
Code:
Sub MoveToIgangvaerende()
'
' Flytter opgaven til sheetet Igangværende projekter
'
Dim i, j, Index As Integer
Forfra:
For i = -1 To 1000
If Sheets("Pipeline").Cells(3 + i, 20) = "Ja" Or Sheets("Pipeline").Cells(3 + i, 20) = "ja" Then
[Code] ......
I get the error message "Method 'Delete' of object 'Range' failed" at the line "Sheets("Pipeline").Cells(3 + i, 18).EntireRow.Delete".
The sub has previously worked perfectly fine.
View 4 Replies
View Related
Jul 11, 2012
I have VBA code that attempts to delete an entire row from my worksheet:
Code:
Cells(3,1).Select
Selection.EntireRow.Delete
This works fine on small data sets, but on larger data sets it gives me the error message, "Excel cannot complete this task with available resources". This happens even when I try to do the deletion manually (without VBA code). Clearly, the code itself is not the problem.
My document has about 250,000 rows and 2,500 columns. While this is big, it is significantly smaller than Excel's documented limit of 1,048,576 rows and 16,384 columns.
I am using Excel 2007. My computer has 2GB of RAM but even when I try it on a computer which has 8GB of RAM it gives me the same error. If I "ClearContents" instead of "Delete" it works fine. For my purposes, however, deletion is entirely necessary.
View 9 Replies
View Related
Jul 17, 2014
I'm trying to implement a very simple macro to paste a set of cells - already copied to the clipboard from a CSV file - into a worksheet.
Basically, all I need it to do is to allow the user to open that other CSV file, hit CTRL+A and CTRL+C, then go to the relevant sheet in my workbook and run the macro, which should simply paste the copied data into that sheet (starting at cell A30).
Here's what I have so far - I keep getting an error when the macro reaches the ActiveSheet.Paste command.
VB:
Sub UpdateData()
'
' UpdateData Macro
'
Dim strSheetName As String
[Code]....
View 5 Replies
View Related
Aug 11, 2014
Macro (see below).
I have two sheets 1) ap modified 2) gl download
It's merging the two sheets together. however, it's pasting over the last row of data. For example, gl download has data from row 4 to row 100. The Macro is pasting data from ap modified starting in row 100 of gl download instead of row 101. How can i correct this?
Sub C_Merge()
Dim w1 As Worksheet, w2 As Worksheet
Set w1 = Sheets("ap modified")
Set w2 = Sheets("gl download")
Dim lr1 As Long, lr2 As Long
[Code] .........
View 3 Replies
View Related
Jul 17, 2013
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies
View Related
