Give me the code to attached one column of data to the bottom of another?
ie the next available cell
so column a has 250 lines of data the data from another column will then go diectly into 251
thats not the number i want but the next available
There is one crucial feature to the 2007 Excel that has been overlooked.
Throughout all versions of Excel there has always been the feature of
converting text to table, however there is no way to do this in reverse.
There is no way to merge two columns of data and to keep all of the data
without one column overwriting the other. If only there were an automatic
way to merge two columns of data and to be able to place a delimited
character in-between, just like the “Convert Text to Columns Wizard”, except
in reverse. Currently, the only way to merge two columns of data is to
manually go row-by-row and cut and paste them together. However, for 500,000
rows of data… this is impossible. Or to use a function to merge two columns,
however this requires that the original two columns remain. This is also
unacceptable. If Microsoft really wants to make Excel more functional, how
can this vast improvement be overlooked?
I've been trying unsuccessfully to find a way to merge data into a matrix, but can't quite figure out a way to manage it. I have a list of employees in column A, in the list there are employees, many with multiple instances, and in columns C onwards there are dates in dd/mm/yyyy format.
Each line represents the number of nights in a trip, from 1 to 35 nights and the start to finish dates. Where as some employees may only have one row with one date others may have 20 rows with between 2 to 35 dates.
I'd like to merge this into a matrix with one line for each employee showing which nights in the year they were away (tab matrix) which has a day of the year to illustrate which employees were away on which nights of the year.
I've uploaded an example to highlight what I mean.
I've tried a pivot and an index match formula but couldn't get either to work.
I have two columns
Req | Expiry Date
yes 11/12/2010
yes 08/06/2012
yes 02/07/2017
how do i merge both columns into one.. not losing any data hence
Req Expiry Date
yes 11/12/2010
yes 08/06/2017
I am using excel 2007 ITS FOR WORK!
Current Data:
File 1:
Each set of data is listed in either two or three rows
Eg.,
ID
Date
Filename
ID
Date
ID
Date
Filename
The goal is to move them to separate columns (rows can be 3 or 2 for each data set, and may or may not be separated by space/additional row)
File 2:
Has a common field 'ID' as that of File1, does not have Date, and Filename, but has a new field 'Detail' (already in the expected format)
Eg.
ID Detail
The goal is to merge properly formatted data from File 1 to File 2
Eg
ID Date Filename Detail
I have data in excel that has some information the same with a unique field. See below:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
[code]...
I want it to consolidate all of the like information but add on the codes in separate columns like this:
Last Name
First Name
ID
Date
Address
Apt #
Acct #
Code 1
Code 2
Code 3
Code 4
[code]...
Also, sometimes the same code is used multiple times but i want any duplicate codes to show as separate codes.
I've been working on coding a summary sheet that pulls data from
worksheets in the active workbook.
I'm almost done, but am stumped at writing some code that will loop
through the columns that I have copied and total them. I recorded a
macro, but nothing happened when I ran it.
What I have now is this code snippet that I found which works
perfectly when I put my cursor in the active cell.
I am not sure how I should write it into my sub.
code that I found that works:
Set rng1 = ActiveCell.End(xlDown)
Set rng2 = rng1.End(xlUp)(2, 1)
rng1(3, 1).Formula = _
"=Sum(" & Range(rng2, rng1).Address(False, False) & ")"
I tried this:
For Each col In NewSh
ColNum = ColNum + 1
Range(RwNum, ColNum).Select
Set rng1 = ActiveCell.End(xlDown)
Set rng2 = rng1.End(xlUp)(2, 1)
rng1(3, 1).Formula = _
"=Sum(" & Range(rng2, rng1).Address(False, False) & ")"
Next col
i would like to merge two columns as explained below
for ex
the 1st column is:
1
2
3
4
5
the 2ed column is:
1
2
3
4
5
the merged columns should be:
1
1
2
2
3
3
4
4
5
5
Note that the "Fruit" and "Fruit Totals" column letter position will always be different every time I run the macro, so I would like the macro to find these columns by name rather than by column letter.
I'd like a macro that adds the total number of fruits in the "Fruit" column by looking doing 2 things...
1. Add the total number of "Fruits" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Fruits Total"
2. In the cell directly to the right of "Fruits Total" put the value of the total number of fruits in this cell (which will be in the "Fruit Totals" column)
3. Add the total number of "Apples" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Apples Total"
4. In the cell directly to the right of "Apples Total" put the value of the total number of apples in this cell (which will also be in the "Fruit Totals" column)
5. Repeat steps 3 & 4 for the other fruits
Best to show you an example ...
ive got columns of dates that i want to aggregate up into a single column of distinct dates. the dates columns are of varying length, some with gaps in the middle of the column, and some columns are blank. dates in teh columns may duplicate, but i only want distinct dates copied in the single column.
i cant do this by hand because there are dates in around 200 columns so i need a macro or way to do this quickly. ive attached a picture to explain the problem.
I have two very long columns of client names. The columns represent reports that were run at different times on the same information.
What I want to do is merge the two clomuns. The issue is that there are many names that are the same but some that are different. Is there a way that you can merge the info. So it ignores the client names that are the same but auto adds the ones that are new. There are financials in other columns that I want to have come along during the merger.
i have two columns with account numbers, i need one column with both account numbers, separated by a hyphen, see below the first line would be 10-15.
10 15
10 20
10 30
10 40
10 41
10 41
I'm looking for a way to put data into 1 column from 2 different columns, alternating every other row.
The data looks like this:
A B C
1 2
3 4
5 6
And I want C to look like this:
C
1
2
3
4
5
6
I don't necessarily need to keep the data in columns A and B, as long as C follows this format.
Excellent, just what I was looking for. I couldn't get the UDF working right, I'll try messing around with it, but the Index solution works great!
My data in excel looks like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 2
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday 12:00 P.M. 1
3/22/2012 0:00Thursday Not Requested 2
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday Not Requested 1
3/22/2012 0:00Thursday 12:00 P.M. 2
3/23/2012 0:00Friday Not Requested 2
3/23/2012 0:00Friday Not Requested 5
What I'd like to be able to do is if Column A,B, and C are the same to sum column D. So, for example, I would like the data above to look like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 7
3/22/2012 0:00Thursday Not Requested 3
3/22/2012 0:00Thursday 12:00 P.M. 12
3/23/2012 0:00Friday Not Requested 7
I'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies View RelatedI have data I extract out of a datasource. I run a few excel scripts upon it and export the content to another spreadsheet. The column of data (I have columns a - h) i'm concerned with is H. The totals in that column regardless of the length of the column (could be 10 rows of data or 10,000) I need to delete the top 10% and bottom 10% rows completely of those numbers in H and leave the remaining 80% in tact.
View 2 Replies View RelatedI have a 23 sheets in a workbook and in each sheet i have around 1200 to 2500 data.
What i want is : from active sheet i want to open another sheet which is located at my desktop and should select column A, H & I all data (whether it is blank at last not to worry) and paste it into my active sheet in column A,B & C then i also have formula to calculate saving per shoe in column D,E & F.
For column D,E & F in active sheet the formula should fill down until the column A gets blank (For example : in column A,B & C under active sheet takes 1230 products so formula of the column D,E & F will end at 1230 row)
I have tried to record macro for the same but this is only for the restricted rows i.e. no. of row so I post it now.
I'm looking for a way of keeping case sensitive data in a range of cells, before using Data Consolidate, which when merged afterwards, Consolidate removes the case sensitivity and combines the quantities into one.
Check out this simple table as an example >
A
B
C
D
E
F
G
H
1
TEXT
QTY
TEXT
QTY
TEXT
QTY
TEXT
QTY
2
and
3
and
2
and
10
and
5
[Code] .........
Cells A1-B7 and C1-D7 are two sets of original data, before consolidation.
Cells E1-F4 are the result of applying a Data Consolidate operation to the A1-B7 and C1-D7 ranges - note how the merged result ignores the case sensitive condition in the original ranges.
Cells G1-H7 is the post-consolidation result that I'm looking for, where the original text case is maintained.
I have a parent spreadsheet with raw data(with errors) and a child spreadsheet without errors. I want to merge the child into parent. (:{). I am thinking of comparing multiple columns from each sheet to ensure maximum accuracy. And when those columns match up we paste the corrected column data from child sheet to parent one. I am using windows 7 and Excel 2010.
View 1 Replies View RelatedI have many rows of data 6 columns wide. I want to be able to enter data into a specific section, then run a macro to "cut-and-paste" that data onto the bottom of my existing data (with one empty spacer row between the new and existing data)
Here's what I have so far:
[Code] ....
Basically the part I need working on is changing [ Range("A101:F130").Value ] to be dynamic. For the code to determine the last row of data, move 2 rows down, and paste the block there.
I use the code below to copy formulas to the bottom of the data in a spreadsheet so I know how to do this with a formula.
I have a need to do the same but with a text string that I define.
No conditions, just normally need to copy the text from the cell 2 of a column down to the last row where data is in any column (Usually being col A).
Code:
Dim Last_Row As Long
Application.ScreenUpdating = False
Last_Row = Range("A" & Rows.Count).End(xlUp).Row
Range("S2:S" & Last_Row).Formula = "=b9/a9"
Application.ScreenUpdating = True
I have a column of data that comes from simple division formulas, E2/F2. I am wanting to take the Percentages given and quickly recognize the ones in the bottom quarter.
100%
75%
23%
39%
50%
N/A
100%
5%
8 items - the lowest 2 (the bottom quarter) should "stand out" - 5% and 23%
I figured two options:
1.) Conditional Formatting - don't know what the formula would be to use
2.) If statement - preferred method.
I would like in the cell next to the percentages for there to be a blank cell if the amount is not in the bottom 25% and if it is I would like the cell to read "Yes"
I thought something along the lines of =if(G2 in range(G2:G100)is bottom(.25),"Yes","") Of course that is not real code. I'm hoping someone will be able to edit that to make it functional. Or guide me in the right direction.
And you may have noticed the "N/A" in the list above. I would like excel to view this as 100%, at the least just ignore it and don't give me an error.
I'm compiling data to be transfered into a report program but the programe can't deal with any Excel Formulas so the data has to appear 'as is' so to speak. I have 2 columns of data (roughly 1200 rows) and I need to merge the two together but i can't have the formula in the merged cell......
View 4 Replies View RelatedI collect data from a number of tools for our server and switch info. I don't have a problem merging that data. My problem is trying to get that data into a working format.
-- I have a server that has dual network connections.
-- This data resides in different rows, and each has slightly different data that I need to preserve.
-- I want to merge these two rows into one pre-defined output layout on a separate sheet without loosing any of the data.
Some other things of note. Not all of the servers have duplicate entries, but still want that data on the output sheet as well.
I have attached an example of what I have to work with and what the output sheet that I'm trying to get to looks like.
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim nextRow As Long
If Target.Column = 11 And Target.Cells.Count = 1 Then
[Code].....
I have a multi tabbed page and the page i want to sort (2) is looking up the 1st page and creating one column list from cell a1 to a280 and it includes a number of zero's from the look up pages because that is the correct result. I already have it sorting but I want it to sort and leave the zeros at the bottom (they are currently at the top) of the sheet so I can just print the info I need.
Can I create this in sort or do I need a macro and how can i write it as I am very green on VB.
I have a s/s encompassing over 350,000 rows.
Data consists of a series of ranges from columns A:N and rows varying in number between 3 and 30.
There are two blank lines between each range of data.
Each range is (with exception) numerically ordered down column H (e.g, 1, 2, 3, etc).
Problem: there are around 1100 occasions when a range contains a row of data which is to be disqualified from consideration. On these occasions the data always appears in the top row of the range and is identifiable in column H by the nine codes 111, 222, 333, 444, 555, 666, 777, 888, and 999).
I wish to find a macro which will :
1. where the top row of a range in column H is one of the codes 111 to 999, transfer that row of data to the bottom of the range.
2. delete the now empty top row from which the transfer was made from.
3. insert a new blank row at the bottom of the range below the row which the data was transferred to (in order to maintain the two blank rows above and below each range).
I am trying to add a macro that finds a dynamic range (number of rows changing with different data sets) sorts column B, then column A, moving blanks to the bottom. My dilemma is as follows:
I have a template with formulas that cannot be changed (I cannot paste special values, or clear the cells). Column A includes HLOOKUP formulas for cells A14:A120. Column B includes VLOOKUP formulas for cells B14:B120. The different data sets I pull in have different numbers of lines, which is why I need to maintain the formulas. However, I cannot seem to find a way to accurately sort column B first from smallest to largest and then column A from smallest to largest. In all data sets there will be at least a few blank lines that I need to move to the bottom. However, due to the formulas within the cells (column A returns a value of 0 and column B returns a value of “ “), excel does not recognize them as being blank. Here is a sample data set.
Branch
S&C Group
77770000583-DOWNERS GROVE BRANCH
MWBF2
77770000585-CHICAGO RIVER BRANCH
MWBF1
77770000587-WEST TOWN BRANCH
MWBF1
[code].....
In this case, I would like St. Charles & Algonquin to be at the bottom because column B is blank.
I'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
View 2 Replies View RelatedI have an excel spreadsheet supplied by a client, let's call this the master sheet, with about 500 URLs and I've been asked to gather information from Google Analytics and place in a spreadsheet. This spreadsheet can't be changed as it goes into their CRM system.
On the master sheet, we have a list of URLS, what I need to do is go through each URL and place the number of visits to each URL on a weekly basis.
Google Analytics excel spreadsheet, will spit out a list of URLs and the page visit numbers.
My question is:
If I have both spreadsheets open, the master spreadsheet and the information from Google Analytics spreadsheet. Is there a way of having both sheets open and doing an exact match on the URLs between both spreadsheets, so we can copy and paste the information directly.
Or even a formula that says something like:
If the master sheet spread has the same URL in the Google Analytics spreadsheet, paste the relevant information into the correct cells?
As you can see, doing this manually will take a long time. I'm just looking for a productive method to save time.