I have made no changes to Excel 2007, but suddenly when I attempt to copy a formula (e4=c4+d4) to a new cell, the result in the new cell is the value from the copied cell (and not a relative copy of the formula). I have checked the Calculation Options and it is set to Automatic. This is an existing spreadsheet that I have used for years. I also tried to copy a formula in a newly created spreadsheet and get the same result.
View 1 RepliesI need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
I want to copy the header from a previous months report and paste it to a new workbook in Excel 2007. How can I write a macro to copy from a1 to g2, keep the same column width and all formatting, then open a new workbook (trouble now in that I previously selected book1 for the new one but this could chnage), and then paste this to the new workbook, and then save this to a location on my computer? So that's, copy, open new workbook, paste keeping all formatting and values, and then save.
View 2 Replies View RelatedWith a macro to copy from the last entire row with data and immediately insert and paste to the row below in the active worksheet. I am using Office 2007.
View 9 Replies View RelatedI have a sheet with columns A to D
In Column B I have data like this:
Car, brake
Car, wheels
Car, exhaust
Boat, fender
Boat, sail
I need to copy everything after the comma (not the space) in a cell to the next cell in Column C and then delete everything in the original cell (column B).
how to do this like a macro, where I stand in the column I would like to copy and then run the macro.
I have excel 2007. I have a workbook with 2 tabs set up as follows:
Tab ATab B
Tab A contains a column with the source data, which will be constantly overwritten
Tab B has a row which references the data in tab A
I would like to copy the reference formula in Tab B down for say 100 rows, but when I use the fill tool, it automatically moves the reference cell up one. I want it to remain the same as the original.
E.g
Tab B, Row 1
ColA = Tab A, Row 1
ColB = Tab A, Row 2
ColC = Tab A, Row 3
When I fill copy the above; on Tab B, Row 2, the formula changes to ColA = Tab A, Row 2, ColB = Tab A, Row 3 etc. I would like them to remain as ColA = Row 1, ColB = Row 2 etc.
I will then use Tab A to input each rows data in Tab B, having converted the previous row into just text so it doesn't change with each update.
VBA to copy entire row in all worksheets in file based on criteria.
step1 Copy tab has criteria in cell c1
step2 search if this c1 value in each tab in column e or g or h
step3 check if column i is yes
then if criteria meet, copy entire row to copy sheet
I came across some similar posts in other forums which can do partial work but not entirely .
Note ; number of rows, columns and tabs varies in file
I am using excel 2007.
Excel 2007
I have a workbook (book1) that is modifying multiple other workbooks (book2). I need to do a vlookup of a sheet in book1 from a value in book2. I then need to insert the value found by the lookup into G7:H7 (merged cells) of book2.
value is in column B of page "Routes" of book1. Found by value B3:C3 of book2. The vlookup looks in column A of book1. The found value is put into G7:H7 of book2.
In a step by step, to possibly make this more clear:
1) check value of B3:C3 in book2
2) find value in Routes sheet of book1, column A
3) upon match, grab the value of column B
4) insert that value into G7:H7 of book2
[URL]
I have files that have thousands of rows in them with company names. The rows contain the company name plus lots of other info. I'd like to be able to create files or sheets with the company name as the file or sheet name with the respective rows contained within it. Make sense?
For example:
Original file or sheet
Date Company Info1 Info2
Jul Sams Expense Desk
Jan Freds Expense Doughnuts
Jun Sams Deposit Return
Feb Sams Expense Food
Dec Freds Expense TV
Would become:
Sheet or File Sams
Date Company Info1 Info2
Jul Sams Expense Desk
Jun Sams Deposit Return
Feb Sams Expense Food
Sheet or File Freds
Date Company Info1 Info2
Jan Freds Expense Doughnuts
Dec Freds Expense TV
Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.
View 4 Replies View RelatedI have two Workbooks
1. Main (where I have a button and I intent to write code and paste the data)
2. Data (where I have data to be copied)
My code so far
Code:
Sub copy()
Dim wbData As Workbook
Dim wbMain As Workbook
Set wbData = Workbooks.Open("path")
Set wbMain = Workbooks.Open("path")
wbData.Sheets(1).Range("A1:A5").copy
wbMain.Sheets(1).Range("A1:A5").PasteSpecial
wbData.Close
End Sub
In the above code the problem is that the file wbMain is already open and when I try to re-open it gives an error and program crashes and if I do not open the file then it gives me the error and says sub or function not defined as wbMain variable is not set.
Second problem:When an error is thrown or I close my files, I lose all the VBA code and module? strange ! how to save modules permanently? using Excel 2007
copy or cut then paste - paste grayed out in excel 07 tried several popular fixes from the web without luck.
Tried: the Excel repair and diagnose tool
Tried: uninstall / reinstall Excel program as well
Tried: go into Hikey - user - software - Microsoft - excel - new - 32 binary and tried adding new rule
Tried: Close Excel.2. Go to C:Documents and Settings[userID]Application DataMicrosoftExcel3. Delete the XLB file.4. Open Excel (the XLB file will be recreated - like the normal.dot) ------> This one - I could not find the XLB file - looked everywhere.
Tried: Open excel hit alt-f11 (to get to the VBE) hit ctrl-g (to see the immediate window) type this and hit enter: application .command bars ("cell").reset Then back to excel to test it."
I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
Excel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").
I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.
Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.
Here is my situation:
Background:
- Excel VBA 2007
- I have a macro that inserts a set of vlookups in range D3:D8.
- When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces.
- I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives:
- Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2()
' This macro inserts the VLookup into cell B2
Dim lastcolumn As Long
Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)"
Range("D3").Select
[Code] .......
Ok I am using Excel 2007. I want to copy 4 cells from a row on sheet 1 to sheet 2 based on value in first cell in row. Example if cell a13 > 0 then copy row 13, cells b13 thru e13 only to first available row in sheet two but starting from row 12 on sheet two. Because sheet 2 has title information at the top from row 1-12.
I would rather not have to use a button to do it, would like it to do it as data is entered in sheet 1.
In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.
View 5 Replies View RelatedHave a HUGE excel 2007 sheet of over 1500 rows that looks like this:
A1IDS09C1_PEND_COB2345678910IDS15C1_HIST_GATIL111213141516Sheet3
I need to get it to look like this:
A1IDS09C1_PEND_COB2COPY YES SHRLEVEL CHANGE SORTKEYS SORTDEVT SYSDA3BMCSTATS YES UPDATEDB2STATS YES UNLDDN
RU0014CONDEXEC YES UNLOAD RELOAD REDEFINE NO DELETEFILES YES SORTNUM 125DDTYPE WORK ACTIVE YES
DDTYPE SORTWORK ACTIVE YES6DDTYPE LOCPFCPY ACTIVE YES7DSNPAT
[Code] .......
In other words, I need to copy the text in blue so that it is above the text in black and the text in red so that it is below. Then I need the macro to repeat this procedure for each cell that it finds containing text in black. I have already created and run a macro to insert blank lines between each black text entry.
Trying to create a macro to run through the following steps when I select a chart and run the macro:
Paste>As Picture>Copy As Picture>As Shown When Printed>OK
I used the macro record feature and when I enter the shortcut it always returns the same chart. How do I get it to run on whatever chart I have selected instead?
I am constantly using this function to copy charts from Excel into PowerPoint presentations and am frustrated with all the extra steps it takes (versus just Ctrl-C).
I have an xls with over 500 rows of data, every day I have to update the contents of some of the cells, Cell A contains the date and is auto filled already to the end of 2009, Cell B shows me the number of days since I began the sheet and is also auto filled already to the end of 2009, Cell C & Cell D I have to manually enter data
Cell E contains this formula =D527-D526
Cell F =C527/B526
Cell G = =IF(C527=0,0,C527-C526)
Cell H resorts to manual entry.
My question is "why do these columns with formulas, (E,F & G) not automatically carry the formula to the next row?" I'm sure that they once did. Is it a setting that I can't find?
This is excel 2007.
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
I have two worksheets, contractor & list. Assume that Column (A) on the "contractor" worksheet is a named range from Column (A) on the "list" worksheet. On the "contractor" worksheet I would like to put in the contractors name, and auto populate the pay value in column (B). I have been using a Vlookup formula, but need to automate this process a bit more.
"Contractor" worksheet - Two columns: (A) I will input the contractors name from a dropdown list based on name range from my "list" worksheet. (B) is where I would like to populate the pay base on column (B) in my "list" worksheet.
Contractor (A)
Pay (B)
Jill
Fred
Jack
I am using Excel 2007, I have a customer sheet and a sales sheet in the same work book. My customer sheet lists all customers with a single entry only each with a unique customer code. My Sales sheet lists at an item level but does include the customer code so if my customer has purchased more than one item the customer code can be repeated on the Sales sheet on multiple rows.
When I do a vlookup to display the amount each customer has spent on the customer sheet, only the very first sales figure is displayed, if further down the sales sheet the same customer has made another purchase I want this figure to be added to the first figure and all I want to see on my customer sheet is the final total figure.
The vlookup formula I am currently using is:
=VLOOKUP(G2,Sales!$A$2:$B$1785,2,FALSE),
I'm thinking maybe a Vlookup will not do what I require, maybe I need a different formula/function?
believe this is a simple formula I just cant seem to get it right. Example: H1 has 859.375 and I need H2 to be 71' 7 3/8
View 5 Replies View RelatedI am working on a sheet that will copy a specified number of sheets, rename them, set a cell within the equal to a cell from another sheet and (the problem) set cells on my input sheet equal to cells in the newly copied and renamed sheets.
I want the cells in sheet "Data Input" to look something like "='newsheet'E26"
I can make it return the actual number in the cell and return the formula in the cell, but not make the cell in "Data Input" reference the cell in the new book.
Here is what I have:
Code:
Sub CopySheetsTest()
Dim i As Integer
Dim wks As Worksheet
[Code]....
I'm trying to do a nested formula to automatically assign a region number based on what the County is. We have 88 counties we deal with, split into 7 regions. What is the best way to go about setting up a formula to do this, so I don't have to do it manually? I believe the last time I tried doing something like this, I received an error saying that Excel didn't support a formula as big as what I was writing.
View 9 Replies View RelatedPossible to have formula in Header or Footer in excel 2007?
I want to put concatenate formula. Eg. "=concatenate(weekending," ",'sheet1'!a1)"
Excel 2007
I vaguely recall someone telling me there is a way to "eval" or run a string as a formula.
For example, suppose I have a text string 0.15*b15
I want to process it as if it was =0.15*b15
How would I remove duplicates using this formula in excel 2007 ?
=CONCATENATE(Q70,",",R70,",",S70,",",T70,",",U70,",",V70,",")