I have Excel 2007. I have a spreadsheet with email addresses in it surrounded by other text. I want to automatically highlight in yellow each row containing the words gmail, yahoo, hotmail and so on.
I CTRL-H then enter the info as you see it in the pic attached. When I click Replace All it says "that function is not valid". It works like a charm for every other word I test it with.
I'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I would like to have a macro that searches a selected area for a number (there may be many of them in the spreadsheet) and highlight it in yellow. Please be noted that I don't only want it to search and highlight the number in its respective order, but also every one of its possible arrangement. To make it easier, please also be noted that all of the numbers I will need to search are only 3 digit numbers.
Refer to the attached document : Highlight Number Desired Results.xlsx
I have a file where the cells are all formulas.
Employees are able to key in a number instead of using the number derived from the formula.
I want the cell to use conditional formatting without the use of macros, so it will highlight yellow if the cell is keyed in instead of a formula.
Is this possible? I have tried numerous things, but none seem to work.
Example:
Cell A6 has the number 24,248 derived from a formula.
Employee thinks the number should be 30,000 and keys that number in.
If it is 24,248, I want the number to have no fill, but if it is a keyed in number, I want it to be highlighted.
rows 1 and 2 are used for my parameters.
row 1 being used for descriptions: Ticker Symbol, Start Date, End Date, and pulling in the close price and volume for each ticker symbol with the selected date range. row 2 being used for entering the parameter info.
row 2 Would read (as an example)
MSFT, 1/1/2002, 1/1/2003, close price, volume.
For each ticker in column A, add a separate wksheet named the ticker symbol and pull in the corresponding info.
So the final result for MSFT, would be an added wksheet named MSFT, with the colums headers being the close and volume, and the rows being the date parameters set in row 2.
all using yahoo finance.
I am using excel 2007. I have a worksheet with a list of words I wish to step through this list replacing the selected words in another workbook with nothing (ie deleting them).
I have the following code
Code:
Sub replacewords()
Dim MyWord As String
Dim wbLibrary As Workbook
Dim wbWorking As Workbook
Dim myExcelColumns As Integer
Dim myExcelRows As Integer
Dim MyRow As Integer
Dim MyRange As Range
[code].....
It does not seem to evaluate "myRange";
I want to know - how to highlight a row (or selected row cells) automatically, when any of the cell is filled with any data..
the row should be highlighted when i go to the next row - like mannually highlighted
if its by macro - let know the code as i tried on what i know but was unable...
I am setting up a Cattle management system in excel 2007. In the column F are the date of births for each individual animal. Example: F2 13/03/2013 F3 23/05/2013. I would then like to highlight the cells with the dates in to find all the cattle that are under the age of 16 months from the current date.
View 9 Replies View RelatedI'm trying to make a spreadsheet template that will find and replace all instances of a given word with a bold or highlighted version. However, I do not know how to make this process passive and automated. That is, as soon as I type certain words, they should be auto-corrected. Is there a way to set excel so it will recognize certain words and replace them? Is there a way to do this in the settings? I don't think a macro is the right answer in this case, so I put it in the general thread.
View 5 Replies View RelatedA certain macro (or is it a VB script?) in an Excel 2007 spreadsheet has to be manually recalculated every time I open the file. The only way I've found to do this is to click in the formula bar and hit Enter, or else click the green check mark to accept the formula. The spreadsheet is set to recalculate automatically, so I do not understand why this is happening.
Another wrinkle is that I can't locate the specification/definition of the macro. I checked the Developer menu on the ribbon and looked in the Visual Basic and Macros lists, but could not see the definition of the macro in question. Another user created the spreadsheet but I am unable to contact him...
Using Microsoft Excel 2007 and all of a sudden, my spreadsheets are not automatically calculating the formulas. It does not matter if I have other workbooks open or not. I still get the problem. It does not happen 100% of the time to make it even more complicated.
- Calulation set to auto in Excel Options.
- No VBA functions being used. I can the worksheet summing 1 + 1 and get the error periodically. It does not have to do with the spreadsheet being too complicated.
- Even if I can hit Ctrl-Alt-F9 to force the formulas to calculate, it won't work.
I use Excel mainly for creating & updating simple logs, and the problem I keep running into is that when I click in a cell, it will automically select & highlight multiple cells below the one I am trying to work in. It will select anywhere from 4-5 cells up to 13. I don't know what this function is, and I don't know how to fix it. But it makes it very difficult to navigate and cut/paste or change a formula.
View 5 Replies View RelatedI use MS Excel 2007 and I was wondering if it was possible to enter data for certain things once, and have that data copied automatically every time I type the text. For example, if I type Blue Car in a cell and type 4 in the next cell, is there a way I can program Excel to enter that data every time I type Blue Car?
View 14 Replies View RelatedI have an issue with two columns in Excel 2007. The first one has a bunch of numbers that run from top to bottom and I would like to move all of the negative numbers from the first column to the second one. I understand that this can be done with the IF command
View 5 Replies View RelatedExcel (2007) user however I'm not very well versed with VBAs and Macros.
I have three sheets and on each sheet the first 5 columns (A - E) have the same title (all in row 1, frozen top row and with filters) there are other columns but I only need A -E to auto transfer.
Sheet 1 is named "Total"
Sheet 2 is named "Management Referral"
Sheet 3 is named "Health Assessments"
What I'd like is for any entry that goes into any row in both sheet 2 and 3 to automatically transfer to sheet 1, but only the information from columns A - E.
There will be dates (dd/mm/yyyy) in column A in each sheet and when transferred to sheet 1 they must be listed chronologically oldest to newest.
I also need all the information in columns A - E that transfer to sheet 1 to stay in their respective sheets.
I am using excel 2007 and when I change cells my formulas do not automatically refresh. I have set it to automatic and the calculations will not refresh. How I can force a calculation. I did the control alt f9 and nothing seems to work. Any macro that can force all calculations.
View 4 Replies View RelatedI am using the following piece of VBA code in Excel 2007 to automatically generate an email when a button is pushed:
Sub SendEMail()
Dim Email As String, Subj As String
Dim Msg As String, URL As String
Dim r As Integer, x As Double
r = ActiveCell.Row
'Get the email address
Email = Cells(r, 3)
[Code] .....
The button to launch this code sits in cell AK7. What I would like to do is have the macro copy the email address present in cell E7 into the email address section of my created email. In addition I would like the reference provided in cell AJ7 to appear in the Message Subject part of the generated email in the format " RCS Reference contents of cell AJ7".
I'm using Excel 2007.
I'm building a spreadsheet which includes a few columns which have activex check boxes which are linked to cells. I want to allow the users of the spreadsheet to insert new rows if necessary. Ideally, when these new rows are inserted, the check boxes would also automatically appear in the corresponding columns of the new row (and be linked to the relevant cells), just the same way that pull-down menus and formulas automatically copy into the new row. Is there a way to do this?
I am building this waterfall chart. I'd like to put conditional color formatting to change the vertical bar automatically e.g. if it is positive, the bar color is green and if it is negative the bar color is red.
View 3 Replies View RelatedVBA in Excel 2007. Essentially, what I am trying to do is this:
I have to two columns (A and B) that have a drop down list in each cell containing text options. I created the drop down lists using simple data validation. Let's say that A has the following options (East, West, North, South) and B has (Up, Down, Left, Right). For each combination of these, e.g., A1 = East and B1 = Down, I want C1 to pull a unique piece of data (a $ amount) from a separate worksheet. I can get this to work in its most basic form but I want to be able to be able to do this for cells in rows 1 - 300 without having to write separate lines of code for each.
Additionally, I am having trouble getting C1 to update automatically once A1 or B1 are changed.
Is there an option to have row heights set automatically based on the content of the text in the row, and given a specific column width?
I can right click, and set each row height individually.
I can select serveral rows stacked one on top of the other, each with limited text, and change all of those rows at the same time.
But when I select all rows, and try to change row height, the row height option is not there.
i need to word to be high light or underline for misspelled words in excel need vb or macro.
View 9 Replies View Relatedappending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
A1 cell ='9'!$D$9
A2 cell ='10'!$D$9
A3 cell ='11'!$D$9....etc
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I am using Excel 2007 and have to send monthly payslips to respective email ids. I have the Name and Email ids in Sheet 2 Range B1:C59 , and employee codes in A1:A59. And in Sheet 1 i have the Payslip format which was automatically displayed when i select the employee code from drop down list in the cell E7 in sheet 1.
Every time i manually save the files as PDF and send to their Emails. I want the out put as whenever i select the employee code from drop down list , it should automatically save as PDF with Name of that employee ( Name of the employee is located in B1:B59 in Sheet 2 ) and attachment should automatically go to that employee's email Id.
I have received a workbook containing lists, unfortunately the names are listed in individual cells - several per cell, separated by commas. I need to highlight wherever a particular name occurs without splitting the data from the cell, ie like Find but within the cell.
View 9 Replies View RelatedI have a data set containing text (no numbers) that spans several columns and rows. I have a list of 'allowed' words (about 100 words) that can be in these cells. If a cell contains a sentence with a word that is anything other than these allowed words it should be somehow marked. Ideally the 'wrong' word itself is marked, but it would already be very useful if the cell that contains the word is marked in some way.
I tried conditional formatting, but it seems to only allow formatting cells that contain a certain word, not if it doesn't contain certain words. Is there a function or a script that would be able to do this?
Simplified example:
Say you have four allowed words:
Apple
Pear
Orange
Banana
You have the following cells:
>Apple Banana
>Pear Pear Orange Pear
>Banana Apple Orange Kiwi
The third cell should be marked because it contains a word outside of the set.
Sample data (all in column a):
Heading 1
123
12345
1234
345
Heading 2
987
9876
Heading 3
785
Heading 1
2356
8525
Heading 2.........
Excel Version : 2010
Attached File name : <Eliminating duplicates.xlsx>
I want to eliminate the duplicates and plot without duplicate in the yellow cells.
I need to send through VBA emails to GMAIL accounts.
The code below is the shortest I've encountered. It returns:
"The "SendUsing" configuration value is invalid"
[Code].....
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View Related