Sending To Gmail Through VBA?
Jul 21, 2014I need to send through VBA emails to GMAIL accounts.
The code below is the shortest I've encountered. It returns:
"The "SendUsing" configuration value is invalid"
[Code].....
ADVERTISEMENT
Sending Mail With Range As Body Using GMAIL
Mar 28, 2014Normally i am able to send mail using gmail with example text by typing in body field. But I want to send Range(A8:D17) as message body.
First I defined body1 as variable range, then i set body1 as value of my required range in body of message i used variable 'body1' but it is giving error "run-time error '13' , Type mismached "
[Code] .....
Where I need to change in ordger to send mail using range as body .
Email With Corresponding Addresses And Names In Body AND Subject Using Gmail
Dec 18, 2008I use gmail, and have an excel sheet with hundreds of rows. I need to send each recepient an e-mail using their e-mail address (row D), and their name in the body and subject (row A). The rest of the body of the email will all be the same.
View 6 Replies View RelatedExcel 2007 :: Automatically Highlight In Yellow Each Row Containing Words Gmail / Yahoo / Hotmail?
Jun 6, 2013I have Excel 2007. I have a spreadsheet with email addresses in it surrounded by other text. I want to automatically highlight in yellow each row containing the words gmail, yahoo, hotmail and so on.
I CTRL-H then enter the info as you see it in the pic attached. When I click Replace All it says "that function is not valid". It works like a charm for every other word I test it with.
Sending An E-Mail
Feb 3, 2009I have an excel sheet that our sales staff enters data on and I'm wondering if there is a way to send an E-Mail to certain people if they answer yes in cell S44? I want this to send an E-Mail telling the intended person that they need to perform a "First Article Inspection" on an item that sales has just finished with. The excel is 2003 and everything runs through our network.
View 9 Replies View RelatedVBA: Userform Sending Email
Jan 16, 2009I'm working with an excel file, a userform and a command button. The command button is the main question here. Bascally when this button is clicked and email is sent to a specific person, me. This email also contains an attachment, and currently that is the active workbook open behind the userform. This works well, sort of. I sent this excel file to 5 co-workers to test. All but 1 worked OK. One, however, did not.
When the button was selected the standard Outlook message came up: "...an automated email is being sent on your behalf...select YES to continue..."...It all looks fine, but nothing happens...nothing shows up in their sent items folder and I do not receive this message.
Has anyone experienced this before? Is there a sitting with this users Outlook that prohibits the sending of automatic emails? I've added my command button code below...incase someone sees thing strange...(I am rather new to vba coding...)
Sending Emails From 2003
May 9, 2009I have a macro which uses Outlook to send an email. I know it's not possible to over-ride the annoying 'Another program is trying to send an email....' dialogue box but I wonder if there is a way of exiting sub if the user clicks No on that dialogue box?
View 7 Replies View RelatedSending A Range To Notepad
Jul 21, 2009i was trying something like this...but it doesn't quite work.
can anyone point me in a direction that works better?
Sending Sheets To Emails
Jan 21, 2010I'm trying to send sheets to an email.
My code up to now saves a copy of the sheet in a file, and I send that file out.
Unfortunatly when I run my macro it ends with the email opening, the file being attached, and I need to input the email adress. Also, i need to automatically overwrite what is in the folder.
My code looks nothing like the one on Ron's tutorials.
Sending Emails Automatically
Jul 9, 2013I want to run a macro dailly where he is going to look in a specific column and based on that value he needs to send emails based on several other cells.
It is a contract database. So for example in:
column A = Country
B = Supplier
C = Days untill end
D = SPOC
E = Manager
What do i want that when i run the macro he looks at column C and where-ever he finds "90" he send automaticly an email to the personnes in column D and E.
In subject i want to see the name of the supplier.
In the email i want to put a text like :
Hello,
Hereby i want to inform you that the contract "Supplier" is going to expire.
Please take the necessary action!,
Also i want to do the same thing when it hits the "30" with other text but i guess that it easy to do when the "90" works
Email Sending Through Excel?
Aug 30, 2013editing the code below. what i want is when i filter column X, all email addresses appearing in column V will be included in the TO field in my mail.
Option Explicit
Sub SendEmail()
Dim OutApp As Object
[Code]....
Sending Email Via VBA In Excel
Jan 23, 2014I have written code in VBA to send emails via Excel based on a name that is held in a spreasheet that is then looked up against an organisation address book. What I need to know is there anyway that you can save mails into the Draft folder that were unable to send for example if they have an email adress that is incomplete or not recognised or if the email box has reached capacity?
With OutMail
.SentOnBehalfOfName = "XXX"
.To = Emails
'.CC = "XXX"
.BCC = ""
.Subject = pi.Name & " - Enablement Request"
[code]......
Sending Worksheet As Attachment
Jun 27, 2006way to send only one worksheet of a workbook to an email contact as an attachment. When your in excel you can click on file and select sent to (as attachment); however this attaches the whole workbook. I do realise that I could copy the worksheet that I want to send to another workbook by itself and then send it. However this is time consuming. Anyone know of a way to just send 1 worksheet from the workbook to an email contact as an attachment? I also know that I could copy and paste the worksheet directly into the email.
View 3 Replies View RelatedSending Linked Spreadsheets Via Email
Oct 21, 2013I have two workbooks in the same folder which are linked bidirectionally. I send the files to a colleague, he updates them, increments the version number and then sends them back to me. I store them both in the same folder before opening them. However, on opening all links in one workbook have the form:
[Code] .....
The filename is correct (the updated book) but the sheet name, which hasn't changed, is now a #REF. Redefining the links restores the functionality but is going to become difficult when the plan is shared more widely.
Why this is happening and what I can do to make the links work permanently?
Compose Outlook Email Without Sending
Jun 17, 2014I am trying to write a macro to compose an email in outlook without sending it. Ideally the macro would compose the email and the email would be left open for me to inspect before sending. Below are the details.
Column A contains the addresses
Column B contains the CC addresses
Cell C2 contains the message
I can change where the above info is located/arranged if need be.
My spreadsheet automatically generates the email addresses, which are dynamic. For control purposes my employer does not want me to have the email automatically sent, being the reason for me to want to inspect the email before sending it.
Sending Email From Excel Via Web Outlook (OWA)
Jun 23, 2014i have the following code in my Excel worksheet. This code successfully send out email to our customers when if the criteria is true. I have tested this at home and it works perfectly as I use Outlook at home. However when I take this code to work I couldn't get this working as at work we use Outlook 365 and we use web Outlook, OWA.
Is there a setting I can specify to use OWA as I don't think I am allowed to install outlook at work.
[Code] .....
Sending Email With A Picture In Body
Mar 21, 2014I have a process metric that I need to send via email.
I would like to automate this.
I am looking for the following
1. upon clicking send mail button the smart art used on the excel should be mailed.
2. the smart art should be pasted as Image on the body of the email.
3. The body should contain a text message like " dear receiver," <line break> " Please find the below process health for this week" <line break> "Regards," <line break> "Sender"
4. The size of the image on the email body should be height 3 inches and width should be 5 inches.
I have attached the spreadsheet for reference.
Sending Screenshot Via Outlook VIA Code
Oct 23, 2008I need of some way to capture a screen shot of a program on screen and send it to a specified email address at a certain time of the day. I would not think its impossible, could it be done using vba code?
View 10 Replies View RelatedSaving CSV File And Sending To A Folder Over And Over Again
Jan 12, 2009I have this code
View 10 Replies View RelatedSending Information To A New Workbook - Code
May 18, 2009I am trying to get this to sort out to a new workbook instead of a worksheet. There are only two components in C column, so there should only be 2 new workbooks created. I am a little unfamiliar with the terminology for the workbooks.
View 4 Replies View RelatedSending Data From Spreadsheet In Outlook
Sep 18, 2009I have an excel spreadsheet of 500 users which contains these details:
A1 = Email Address
B1 = Mobile Number
C1 = User Name
D1 = Department
E1 = Manager
F1 = Handset
What i am after is something which will let me be able to use outlook to email each user their own details. So the "TO" filed in outlook to be A1 Email Address
Subject to be - Company Mobile Phones Then in the body of the email to have the users details, so something like.
Mobile Number - 0123456789
User Name - Stewart Layzell
Department - IT
Manager - The Boss
Handset - Iphone
Generating Emails From Excel Without Sending?
May 15, 2012I have a spreadsheet that has a command button which generates an email in outlook express, which until today was 100% fine no problems at all.
However I now need it to generate an email (with the email address and subhject line completed) but not to send it - I've tried everythign I can think of but with no joy
Code below:
Private Sub CommandButton6_Click()
If Range("I88") = 1 Then
MsgBox "You have not completed all the details.", vbCritical
Else
[Code]....
Sending Mail By Outlook With Signature?
Aug 3, 2012Is there a way to include my Outlook email signature when using the following macro to send an email?
Code:
Sub EmailReport()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
Sending Email Via VBA - Add Hyperlink In The Body
Aug 14, 2012I am using the below code to send a email by VBA in Excel but I am trying to add a hyperlink in the body of the email.
I would like to use '"Click Here" to go to Google - I only want to show "Click Here" in the email not the full web address
Sub SendEmailData()
Dim iMsg As Object
Dim iConf As Object
Dim cell As Range
'Dim strbody As String
' Dim Flds As Variant
[Code] ........
Sending Personalized Email Via Outlook
Dec 9, 2012Determining the problem with my settings for the failure of this line of code executing.
Set OutlookApp = New Outlook.Application
I was expecting the statement to create a new outlook instance, but got this message
Run-time error '-2147319779 (8002801d)':
Automation error Library not registered.
Excel Sending Email Via SMTP
Dec 10, 2013I have a database file that I use for tracking "Requested Laptops" ( so that technicians can request the model they need ) and what model they want. There are three of us that distribute laptops ( asset managers ), and we have a box that we use to say we distributed it. For example:
TECH REQUESTING .. . . . DATE . . . . MODEL NEEDED. . . . . FOR WHO . . . . . . . STATUS OF REQUEST . . . . . SERIAL NUMBER PROVIDED. . . . . . ASSET TAG PROVIDED.
Those are the columns. The "Status of Request" Column uses data validation "list" and can either say:
NOBODY/PENDING
Wes Distributed
Person2 Distributed
Person3 Distributed
When the technician first requests, he selects "NOBODY/PENDING" and there is Conditional formatting that highlights the row RED so that we can easily see that there is a pending request. Once laptop is distributed, we change this field to Wes distributed for example, and the row is highlighted green.
Now that you have the basics of the file, what I'm looking to do is find out if an email can be sent either by Outlook or SMTP, so that when a technician enters the request and changes that field to NOBODY PENDING, an email is sent to all 3 asset managers saying "Please be advised that an asset has been requested by [TECH REQUESTING]. expedite."
Sending Email Using Lotus Notes
Oct 30, 2006I have developed many macros that generate automatic emails from excel using Outlook, with the excellent help I've found here. Now due to recent buyouts, we have changed our email from Outlook to Notes. I'm looking for the simplest method of changing my macros so they will work with Notes. Below is the typical code I'm currently using. Is there an easy way to change it for Notes?
Public Sub SendEmail()
Dim OutApp As Object
Dim OutMail As Object
Dim Dist As String
Dim supplierinfo As Range
Dist = WorksheetFunction.VLookup(Supplier, Workbooks("ScarForm.xls").Sheets("Supplier Information").Range("a9:z1000"), 3, 0)
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(olMailItem)
With OutMail
.to = Dist
.CC = "emailnames"
.BCC = ""
.Subject = "email subject"
.Body = "Text of email"
Windows(Fname & ".xls").Activate
.Attachments.Add ActiveWorkbook.FullName
.Display
End With
Set OutMail = Nothing
Set OutApp = Nothing
End Sub
Sending Mail Through Lotus Notes
Dec 17, 2009Can we send mail through lotus notes in excel.
Request you guide me with this as to how to do it and what the code is.
I need to send a simple mail in body and as an attachment
Sending A Selected Range Through Outlook
May 14, 2002I've seen a few posts recently asking about sending either sending a range or a worksheet in an Outlook email as the body of the message through code. I've been looking at this and think I've come up with something that might work. I'd appreciate it if any of you XL kings and queens would take a look and see if the code works OK on your machine. I've sent a few messages to myself (sad I know ) and they seem to work well.
Here's the code. You need to set a reference to the Outlook object Library AND the Microsoft Scripting Runtime in order for this code to work.
Option Explicit
Sub SendRange()
'Sends a specified range in an Outlook message and retains Excel formatting
'Code written by Daniel Klann 2002
'References needed :
'Microsoft Outlook Object Library
'Microsoft Scripting Runtime...........
Sending Data To Open Webpage
Jul 28, 2006How do I send data via VBA from a spreadsheet to a webpage that is already open? I don't want to open another IE window. I just want to be able to navigate the IE window that is already open on my desktop. Also, in reference to the open webpage, with this particular webpage (secure site), when you enter data on 1 screen, it takes you to another screen with a different url where you have to enter a bit more data and then move to a third screen with a different url and enter the rest of the data and then submit. Is there a way in VBA to have one macro handle passing data to all 3 screens and submit the information?
View 4 Replies View Related