I export data into Excel format from a corporate reporting tool. 1 column includes a product description in text format, however, due to the many different products I need to count the number of cells based on a single word in the product description.
Hypothetical Example:
The report contains various information about vehicles. The product description exports to a single column and may include "Ford Fusion", "Ford Focus", "Chevrolet Malibu", "Chevrolet Impala", etc. I only need to count how many cells contain information about Fords and Chevrolets. The model detail is not needed.
I'm able to count if I enter the complete and exact make & model description, but want to avoid this due to the large quantity of products.
I'm using Excel 2007, on Windows 7, 64 Bit Enterprise
I want to count the number of cells in a range that have text in them (any text at all) but not count them if they have numbers in them or are blank. How would this formula be written?
I am wondering how can I count different color condition color cells?
I am currently using this UDF,
Code:
Function ColorFunction(rColor As Range, rRange As Range, Optional SUM As Boolean) Dim rCell As Range Dim lCol As Long Dim vResult
[Code]...
However, this code count the entire conditioned color cells that I have. What I want is for the code to count two different colors within the same column range (like B1:B10). For example, I have 3 red color cells in range B1:B10 and 7 green color cells in range B1:B10. So, I want it to count 3 and 7 seperately rather than giving me the total of 10.
Important Note: As it is a conditioned coloring, there is no fixed coloring as to which cell will have the red or green since it is based on conditions.
I am applying conditional formatting on a range of cells. I have 2 conditions to color cells in different colors. Once I enter data, cells get colored corectly according to conditions. What I want is to count how many cells are colored by conditional formatting.
I tried using VBA --- Evaluate formula for each cell and count if TRUE.
I observed, for Excel 2007, as the condition is applied on the range, I expect the formula to be changed dynamically for each cell with appropriate addresses, like for A1, if am referring to cell C1, for A2 it should automatically refer to C2.
And excel takes care of this cells are colored correctly,however, when I try to check the 'FormatCondition' in VBA, I get only one formula for entire range. SO I can not use evaluate to find if the condition is satisfied or not ?
There is a one-to-one relationship between Column A and B, but B is not unique (but can only take a small set of valid values). I wish to query how many id's (Column A) contain a particular property (Column B). If the example above ended before the "...", I would like to get as the output:
Code: 566 2 341 1
because the property 566 is owned by two id's (1 and 3) and the property 341 is only owned by the id 2.
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I'm using WinXP with Excel 2003 - I have a column of highway sign description data (16k+ rows).
Example:
Curve Arrow Right Curve Arrow Left Turn Arrow Reversing Curve Arrow Right Winding Road Arrow(plus many more unique entries)
I'm using SUM and COUNTIF to total the number of times "Curve", "Reversing", "Turn" and "Winding" appear in the column.
My formula is: Code: =SUM(COUNTIF($F11:$F16196,{"*CURVE*","*REVERSING*","*TURN*","*WINDING*"}))
Which works great EXCEPT what I really want is the number of cells with any of those key words, not the total count of those words. The example above should be 5, but since row four contains more that 1 of the key words I'm getting 6.
I need to count how many times an input in given on a same cell, and doing so on the hole column. Like when I enter "x" on cell A1 and it adds 1 on B1. If the input on A1 changes then comes back to "x" it adds once again 1 to B1.
For one Row I'm using this code but I really can't reproduce it on the others.
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
I am trying to find specific text throughout an excel document (2007) and replace it with the same text but in italics. I tried using the options/format function and selecting italics for the "replace" text but it replaces the entire cell text in italics instead.
I want to count the number of duplicate rows where the exact text in columns A and B match. An example is as follows, where column C would be the desired result. Note that there are hundreds of different text values of column A and hundreds of column B, I just simplified the example.
The values in columns b:d range from 000-999. I need a formula that will count the number of digits in B:D that match the 3 values in H1 without counting a digit twice. The existing formula counts a digit twice, like the value in H4.
I am trying to simplify a type of gannt chart bar across a spreadsheet. The spreadsheet has dates across row 3 that are calculated from the first cell F3 with =F3+7 to populate the rest of the row with dates. I want to be able to input a start date in D4, then all the other titles in column A. This start date will start the coloured bar at that start date in the chart, I will then copy/drag that start date cell for however number of weeks for the duration and I want the finish date to auto populate E4 with the finish date and also auto populate the numbers of weeks in C4 for that bar.
Excel 2007ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANA OAPAQARASATAUAVAWAXAYAZBABBBCBDBEBFBGBHBIBJBKBLBMBNBOBPBQBRBSBTBUBVBWBXBYBZ CACBCCCDCECFCG1D42342McArthur River Mine Power
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I am trying to get two cells to be used to adjust other cells on the same sheet repeated times.
In a inventory sheet I have 5 columns as such , A1 previous balance, B1 Qty received, C1 qty on hand, D1 last cost, E1 current avg cost What I want, is to be able to enter my weekly received items in the B1 Qty received and the new cost in D1 Last cost cells and have them calculate my current average E1 and update my qty on hand C1 total. This in itself is not the biggest challenge. I was asking if there is a way that after the E1 current average cost and C1 qty on hand are updated by that formula, that the next time I enter a new B1 qty received and new cost in D1 Last cost cell they will update again basically without changing the earlier calculations achieved .
Example: Today I have item X with a A1 previous balance of 10 , with a D1 last cost of $1, and E1 current avg cost $1
I want to receive B1 10 more today at $.50 D1 last cost, which ideally would end up showing
A1 previous 10 (or 20 if adding) , C1 Qty on hand 20, D1 Last cost .5, E1 current avg $.75
Next week I want to receive B1 10 more at $.25 D1 last cost , which then would update showing
A1 previous balance 10 (or 30 if adding), Qty on hand 30, Last cost $.25 and E1 current avg $.58
Time spent on each page appears in row 18. Need to sum up all of these pagetimes for each site, to get the total time on site. So in the example below,
D19 would reflect the total time spent on GreenElectricalSupply.com sum of cells D18-G18(1:23.0) and H19 would display the total time spent on Rexel.com (00:45.0)
So, how to do a conditional sum across row 18, until a new site begins (indicated by the appearance of text in the next cell of row 8).
Data CDEFGHI8 greenelectricsupply.com rexel.comnextag.com9WW ONLY: Arrived at site via
We've got an end user who opens a .dat file which is delimited with semi-colons, replaces some text in a couple of columns then saves as a text tab delimited file. She swears that before today, the saved file would retain the semi-colons. Now she says it's not. she generated a new .dat file for me and recreated the process, with the resultant semicolon-free file. I asked her to generate another one and send it to me. I opened it first in notepad, and saw the semi-colons.
Opened it in excel (I'm using 2010 on win 7 professional), which saw it as a delimited file and asked me to specify the delimiter. It shows up fine, all the columns are righteous. I made no edits and saved as a text tab delimited, and that saved file had no semi-colons in it when I opened it. This seems normal to me; there's no semi-colons in the excel file, so why would there be in the text tab delimited file. I asked her coworker to generate another .dat from his pc and let me know what he sees, but he hasn't reported back yet.
I am struggling with doing a sort, of a group of alpha characters within a cell (Excel 2007). My data was exported from Oracle 8 as a varchar2 and consists of letters.
Example of what I have BAC GHL DFE MEG
Example of what I want ABC GHL DEF EGM
All I could find were these complex looking solutions involving cursors, plsql, etc. I'm hoping there's a simple solution, maybe within Excel. I've tried different formatting, made sure no other characters were sharing the cells, and tried typing fresh data into a cell (instead of the exported data).
I am using Excel 2007, and here is my scenario. I have a spreadsheet with a different sheet for each month of the year. I want certain cells in a month's sheet to mirror or be equal to the same cell in the previous sheet so that if I change the value of a cell in April, the same cell will automatically be changed in May.
An example is that I have a cell with the value of "Comcast". If I want to change that value in April to "Directv", I want it to automatically change in May, too.
Now I know that I can individually program a cell to be equal to a cell in another sheet and it will do exactly what I want. The problem is that I have about 60 cells in each sheet that I want to mirror the same cells in the previous sheet, and I don't want the entire sheet to mirror the previous one. So with 11 months/sheets with cells mirroring the previous sheet, individually programming 660 cells and switching between sheets to do that would take a very long time.
So my question is this. Is there any way to select multiple cells and have them all mirror the same cells on a different sheet without my having to program each cell individually?
In Excel 2007 I know that if you have a cell containing text that you can change the color of parts of that text like This is the text in my cell and this is red text
But I have a cell with a formula that adds text to the end based on a conditional. I can't see any way to change the text color in this situation. I basically want this formula:
=D_Notes & TEXT(CHAR(10),) & IF(Terms = "Budgetary Estimate Only", "Quote is budgetary only and is subject to change pending final design.","")
I am running EXCEL 2007 on XP. What is the EXCEL cell formula to put in a cell (for example"E5") that will reference the "last" occurrence of a specific text string in column A (For example Chard ) but will show its corresponding column B content (for example its PH number 3.45) regardless of the number of data entries that will be inputted in the future for both column A and B.
A B C D E 1WINEPH 2Chard3.24 3Merlot3.36 4Cab 3.44 5Merlot3.38 xxx 6Chard3.26 7Chard3.45 8Cab 3.41 9 Merlot3.33 10
I have everything else like it is supposed to be, but in one cell a word is broken. I have tried everything and gone back through the tutorials. Excel 2007.
I just wrote two macros that each produce separate text files (call them 'A' and 'B'). I want to open 'B' with Excel VBA, copy all of its contents, and paste that content into 'A' right after a specific location in 'A' (where I have 10 consecutive asterisks, i.e., **********).
Most topics relating to Excel VBA and .txt files have to do with either importing / exporting into Excel (not what I want), or with associating .txt files to Excel (also not what I want).
Ii have a UserForm with a ComboBox in it. the selections in the box are
0 5 10 15 20 25 30
I have 7 shapes in Worksheets("Interface") and renamed each shape caution1 through caution7
What i need is when i click on continue in my userform each shape will change according to the selection.
if 5 is selected all caution shapes will read, Caution flag is out 5 minute break if 10 is selected all caution shapes will read, Caution flag is out 10 minute break if 15 is selected all caution shapes will read, Caution flag is out 15 minute break and so on
My set up win xp pro office 2007. Object is to save the text from a given cell to drive C naming the file with the value in another cell. E.g.
Contents of cell ("AA5") is a string and the content of ("D5") is a number
I have tried altering the code posted which i found on the forum, it works fine for the purpose as it was indented e.g. save the workbook and in my case saves it as the value in cell D5.
I guess I need to use some form of object to pass to the save as method but my knowledge of this is somewhat limited in addition as the is a possibility of either the cell being empty and the file name existing on the C drive, I need to disable the windows warnings and just go ahead and save it over writing what is on the C drive is of no importance as it will be the same data anyway, I can wrap the save in a "if Len ( AA5)= 0" to stop it trying to save if the cell if empty it the save the text string i am having problems with:
Option Explicit Sub SaveAsExample() Dim FName As String Dim FPath As String FPath = "C:" FName = Sheets("Sheet1").Range("A1").Text ThisWorkbook.SaveAs Filename:=FPath & "" & FName End Sub
