Excel 2010 :: Running Total From Previous Sheets With Non-sequential Names?
Mar 27, 2014
formula to take a value from one sheet and add to it in Excel 2010? I'm naming the sheets but not necessarily numerically. I have done it by manually entering the sheet name but would like it to figure out the sheet name automatically based on where the sheet is located in the workbook. That way I can copy the current sheet, rename it and still have it update properly with a running total. Here is what I have now: =D7+'011514'!E7
I Need to Understand Running Total Sum Formulas. I'm using Excel 2010. and I'm typing in the basic correct formula to arrive at a running total for each ajacent cell to the left of it.
I put in the correct formula in Cell (B1) of Sum=(A1)
I then put in the correct formula in Cell (B2) Sum=(A1:A2) I then highlight the A1 part of the formula with an F4 Key to lock it in.
I then drag the B2 Cell all the way down the excel page to capture all of my running total coming from the (A) Column just to the left of my formula.
Why even though I'm getting the answers I want in the running total does it put an error message in each of the correct answers in each of the cells in the (B) column where I put my formulas.
I tryed to delete the error message spot but I don't know how to delete all of the error spots without going into each cell one by one.
How can I get rid of all the error message out of each cell without having to click on each cell one by one to do it when I might have over 500 or more cells to click on.
I have to keep a record of the running totals of school house points for each week. The problem is that teachers are very lazy and don't record data every week so I have many blank cells which my current formula can't cope with. I've tried using N/A but it doesn’t seem to work? (Have thought about threats of violence but would probably lose my job) I’m if there is no data (blank or 0) then I need it to keep the same total in the cell as the previous week and so on until new data is entered and updates the total. I have attached a simplified copy: Teachers enter points in the HP sheet, the Running Totals sheet (TAB) contains the formula.
Windows 7, Excel 2007. a formula to find the next lowest sequential number within a group.
Here's an example data set, which represents transactions by date and category:
Col A is a user entered Date which will not be in chronological order (unfortunately a sort is not an option)Col B is a user entered CategoryCol C is a formula that gives the chronological sort order based on the date.
The formula in C2:C9 is =COUNT($A$2:$A$9)-(RANK(A2,$A$2:$A$9)+COUNTIF($A$2:A2,A2)-1)+1Col D is a formula to determine if the row is the first chronological transaction within the Category
The array formula in D2:D9 is =IF(MIN(IF($B$2:$B$9=B2,$C$2:$C$9))=C2,"Y","")
This might not be a necessary column, but can be used as a helperCol E is where I would like a formula to give the next lowest value in Col C for the Category in Col B (the order number in Col C for the previous transaction within the same category).
I have entered in the values that the formula should return in Col E in the table below
A B C D E
[Code]...
If the current line is the first transaction of the category, the formula should return the value in Col C for that line (so E2 would equal the value in C2, which is 2).
So the first part of the formula could be straightforward, using the helper column: =IF(D2="Y",C2,
Here's the tricky part: If it's not the first occurrence of the category, then it should return the value of Col C for previous transaction (or the next lowest number in Col C that is within the same category).
E3 would return 4, since the previous transaction for Category A was line 9 C3 = 6, and of all the values of Col C for Category A (2, 4, 6, 8), 4 is the next lowestE4 would return 6, since the previous transaction for Category A was line 3 C4 = 8, and of all the values of Col C for Category A (2, 4, 6, 8), 6 is the next lowestE5 would return 1, since it is the first transaction in Category BE6 would return 1, since the previous transaction for Category B was line 5 C6 = 5, and of all the values of Col C for Catebory B (1, 5, 7), 1 is the next lowestEtc.
I'm thinking I need an array formula to find the minimum value within the category, where that value is less than the value of Col C in the current line. Just not sure how to write that...
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
Basically, I have an excel spreadsheet with different valued items for example,
TV Essential l £15 TV Essential extra l £20
Broadband Essential l £ 8 Broadband Extra l £12
I have options for TV, Broadband and Phone. At the bottom of the spreadsheet I want three drop down lists to pick what TV, Broadband and Phone package I want. For example: TV Essential, Broadband Extra and Phone Weekend. I can create the lists but I was wondering if there was anyway where, as you select the option on each of the lists, a running total will be created. So when TV Essential is selected £15 is added to a cell, say F20. Then when Broadband Extra is selected another £12 is added to cell F20. And as you select different ones in each list the total in F20 changes.
I have inherited support for a suite of Excel 2003 spreadsheets with complicated macros which run fine on XP. Having been tasked to test them on Windows 7 with Office 2010, I have not converted them as they are run by several sites globally who may not upgrade to Office 2010 at the same time. Hence they run in compatibility mode which in general is fine.
However, certain macros are veeeery slow and to the user would look like the app has hung. In debug I have found that the macro takes 10 minutes plus whenever it hits any of the following code:
Code: With Application .Calculation = xlAutomatic .MaxChange = 0.001 End With
ActiveWorkBook.PrecisionAsDisplayed = False It goes slow on each of the three 'lines' so it seems that it is actually doing an auto calc each time!
Is there some configuration I can do to prevent this? Setting auto calc to Manual didn't work and anyway I loose things, like data validation, when I save it in Excel 2010.
I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it. been trying to figure out a macro so when you press the update button it then just updates the monthly total.
My sheet displays values collected from a database via an AddIn. The values are updated by pressing CTRL+G (AddIn function).
I have an OnTime macro running SendKeys "^G" to update the values every minute. When the values exceed a certain limit, a sound is played from a custom Alarm function.
This all works as long as the excel window is active.
But if excel is minimized or another window is opened, the values stop updating until Excel is active again.
When the values dont update the sound is not played and that defeats the purpose of the sheet.
As you can see in attached file (hopefuly you can see it) pivot table Summed sales in 2014 and 2013 in column GRAND TOTAL. Insted of summing this two years, I would like to show difference between them, but keep this layout!
I'm an Excel newbie using 2010, but have been given a rather daunting task. I have a lot of data organised in a table, something such as:
Column A: Name, Column B: City, Column C: Date Entered
I can obviously filter this table to show the values I need, but I need it to automatically tell me the total amount of people entered per week, per city on a separate worksheet.
I understand I could use a pivot table for some of this, but I want to further automatically manipulate the data once I have the totals (for example, adding a financial value for each, etc) which I'm not certain how to do with a pivot.
So, ideally what I would like is a formula that says total entries in Table 1 that are marked Sheffield in Column B and have a value including or between 01/03/2014 and 07/03/2014 in Column C.
I need a method or function that can count the TOTAL number of pages to that will be printed. I don't need anything with HPageBreaks or Get.document(50, ""sheet name"")") for these don't seem to work on my worksheet.
All they seem to do is give me a number lower then the number of pages that will be printed and they are dependent on where the active cell is.
Here is my code that does not work.
Code: Agreement_Page_Count = ExecuteExcel4Macro("Get.document(50,""Signature Page"")") and Code: Function HowManyPagesBreaks(sSheet As Worksheet) Dim iHpBreaks As Integer, iVBreaks As Integer Dim iTotPages As Integer With sSheet
[Code] ........
Both codes return 2 when there are 3 pages that can be printed. Unless I pause the code select the cell at the bottom of my sheet (it ignores it if I use use a macro to select the bottom cell) and then continue my code.
I've tried it with and without the entirerow.hidden.
Is there a way of bypassing everything and using a marco to open up page preview and getting the total number of page to be printed? I'm using excel 2010
I have a large amount of data that is from an events file. When I enter it into excel, it almost maxes out the row count (excel 2010) The data basically lists Event, Date/Timestamp, Call ID, and a few other details. Im trying to get a total of specific events and if they were successful or not, so the other columns arent of concern. For instance, there is an event called searchbyphone, a later row in the data will include searchresult found or notfound. The only way to pair these up is by the ID number which is unique per call.
So in the example below, ID 123-45-789a was a search by phone and successful (found). The Date/Time field is down to milisecond. If this were just adding up all the various events and then totalling the searchresult found/notfound, it would be simpler. However, Im only interested in certain events and found/notfound is used for many other events.
Using the data below, what is the best way to pull out an event (say the total number of searchby phone) and then know how many of those were found and not found (when the information needed is on 2 seperate rows and only the ID would be the same?)
To through a wrench into it, there can be several events with the same ID becasue the ID is unique to a call - a caller can search by a few variables. There will be the same amount of found/notfounds though with that ID. (meaning as a caller, I can do a few searches and all of these will be in the event file with the same ID) In this case, the number of requests (events) will match the number of results (found/not found).
What Im trying to accomplish is to get a total of searchbyphone found and not found, So in this example I would have searchbyphone found = 1 and searchbyphone notfound = 0.
ID Event Date/Timestamp
123-45-789a searchbyphone 10/7/2013 12:52:38
987-65-432b searchbycity 10/7/2013 12:52:39
123-45-789a searchresult.found 10/7/2013 12:52:41
874-35-123c searchbyzip 10/7/2013 12:52:42
987-65-432b searchresult.not found 10/7/2013 12:52:47
I have an excel sheet (version 2010) that has a few sections that you can add in names (via drop down box). I also have a spot where i want these names to populate - on a second sheet.
My problem is when I refer to the first worksheet from the second worksheet it shows blanks where there are no names. For example i want the second sheet [ LOC ] to show the names that appear under Truck #1, #2, #3, #4 - but truck #1 may not always have names under it?
I am trying to display data on a chart and dynamically change the items to display by manipulating the filters. What I cannot figured out is how to display the Pivot Table Grand Total column on the chart. This is the total that the pivot creates and there is no total field in the data. Hope this explanation I gave is clear.
Excel ( 2010 ). I am creating a Sales Leads spreadsheet. Within the spreadsheet I have a the following relevant fields.
proposed sales value field ( F2 ), Estimated Close - which will be Q1,Q2,Q3 or Q4 ( G2 ), % Probability ( H2 ) & Q1 ( I2 ), Q2 ( J2 ), Q3 ( K2 ) & Q4 ( L2 ).
F2 = 150 G2 = Q2 H2 = 10%
I want to calculate the actual value of sales based on %prob and put the total into the correct field ( I,J,K or L ) based on what field G2 says. So in this case 15 into field J2. I have attached an example.
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
I would like to ask the user if when the name the worksheet the same as an already existing spreadsheet tabe if they would like to overwrite it or unload the user form.
I am not sure of two things:
1. how to find the already existing tab?
2. Once I find out how do I programatically delete it, so the code can continue
The code below works with the exception of the last section (trying to achieve the questions stated above).
I am using Excel 2010.
Code: Private Sub CommandButton1_Click() If TextBox1.Value = blank Then 'Need name for processing MsgBox ("Name must not be blank.") Exit Sub End If If Len(TextBox1.Value) > 12 Then
How do I enter a formula in excel 2010 that will give the total amount of times each number is in this group. Example : how many times (total) the number 12 showed up , how many times the number 27 showed, and so on for each number that is in the entire group of numbers, from 1 to 80 .
Here is the page I will copy and paste into a workbook sheet from the internet that i want to evaluate the times each number was called.
Very new to all this , I am a bit aged and need not to learn excel A to Z, just need to know what correct statements /formulas have to be entered to do what i desire.
I am only interested in the total count of the small bold numbers 1 to 80, each single digit 1 to 9 and double digits 10 to 80 will be in their separate cells. The large bold three digit numbers and dates/times will have to be erased (manually) before the calculation takes place.
The easiest way I can describe the scenario I am trying to create, is to use a company list of personnel (my index) and to generate a time-sheet workbook per person based on a pre-populated template. This time-sheet is saved as the persons name and has the persons name entered into cell D:10
I have a workbook which contains two worksheets;
1) An Index sheet which contains a list of names that I wish to use in Q16 downwards (note the length of this list will vary each time I run this)
2) A "template" sheet which I wish to duplicate in new workbooks
3) A second "data" sheet that I wish to copy across in new workbooks
I need a macro that will take the "template" and "data" sheets and copy it into a new workbook, renaming each new workbook to each name in my Index sheet. I also want that same Name to be copied into cell reference D:10 of the "template" each time.
The end result is that I should have a series of new files generated and saved which are named the same as the Index list, with both the "Template" sheet and the "Data" sheet present, with the cell D:10 pre-populated with the Name provided in the "Template" sheet.
In an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
I found code from the internet attributed to Bob Phillips for VBA to have a dialog box pop up and allow the user to select what worksheet to navigate to.
The code works well except it doesn't exclude hidden or very hidden worksheets.
Code:
Sub BrowseSheets() Const nPerColumn As Long = 38 'number of items per column Const nWidth As Long = 13 'width of each letter Const nHeight As Long = 18 'height of each row Const sID As String = "___SheetGoto" 'name of dialog sheet Const kCaption As String = " Select worksheet to goto" 'dialog caption
[Code]....
I know there is the line of "If Sheets(i).Visible And i Mod nPerColumn = 1 Then..." but it still allows all sheets to show up in the dialog box.
How it can be modified to include visible sheets only?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
