I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
I tried Conditional format and no luck. (Office 2010)
What I'm trying to do VB is:
If Cell B:B has value of "402" or "up"
and Cell C:C is less >100
Then Change color on Cell C:C to "yello, red, etc" (if C value is <100 no color change)
I'm using windows xp and excel 2010. I have a very large sheet that has a bunch of highlighted cells. There all highlighted the same color. I need to remove the highlighting colors and change the font color of the highlighted cells to red.
View 3 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have a checkbox where the values are reflected as True/False in a seperate column, what i simply want to do is take the value from one cell, and add 10% of the value each time a value becomes True.
For example in this value column after the check box has been filled out it might look like this:
False
True
True
True
False
False
False
The cell then needs to take the figure, lets say, 100, add 10%, then add 10% to 110, then again and so on for however many "True" statements are in the column.
I have tried with no success with various SUM/SUMIF/COUNT/COUNTIF/IF etc cant seem to get it to work, im not sure the cell refreshes correctly after the checkbox is filled out and its not registering the new "True" value as by default its all set to "False".
Windows 8, Excel 2010,
What is a condensed way of saying;
Dim x As Integer
Dim y As Integer
Dim z1 As Integer
Dim z2 As Integer
Dim z3 As Integer
Dim z4 As Integer
Dim AA As Integer
I have tried to shorten my code by combining common tasks, however it runs but selects the wrong data. In the example below,
The code returns the expected if I select "M135X" and "300 hrs", but unexpected results if "M135X" and "1500 hrs" is selected
My variables are models and hours - the code below is for one model.
Code:
'Next Model
ElseIf Range("D3") = "M135X" And Range("E3") = "1st Service" Then
ThisWorkbook.Worksheets("M100X-135X").Range("B37:D44").Copy
Range("J10").Select
Selection.PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
[Code] .........
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I need some different columns within a row to calculate based on a statement found in an earlier column in the row. something similar to below. there will only be two statements total which are noted on the table below.
A
B
C
D
E
1
0
0
20
5%
[Code].....
So basically If column A = disposition calculate D and E in column B but if Column A = Receipt calculate in column C
The formula for D and E is not exactly as shown just using that as a quick example. I'm using office 2010.
1) I have a VBA macro MyMacro() which works fine.
The macro is assigned to a button on the w/s, and also runs from w/b Open() event and other locations within the w/b.
2) The macro displays a message just before exiting whenever it is called.
3) I’d like the MsgBox statement in the macro to be executed ONLY when the macro is run from the button.
In other words, skip the MsgBox statement when the macro is run from anywhere else in the VBAProject.
Can this be done ? possibly by inserting a statement or two before MsgBox in the MyMacro() code ?
I Have a CheckBox Thats Linked with CA22
In Cell CB22 I have the Following Formula:
=IF(CA22=TRUE,"1","")
In Cell CC22 I Have...
=IF(CB22="1","RM-4E ADD1",HYPERLINK('RM-4E (Add - 1) (2)'!A1,"RM-4E ADD1"))
The Sheet namne its supposed to Hyperlink to is called
RM-4E (Add - 1) (2)
When the Check Box is Unchecked it Changes CA22 to False and Puts in CC22 Text: RM-4E ADD1
When the Check Box is Checked it CHanges CA22 to TRUE and is supposed to create a Hyperlink to that sheet...Only when i click it it comes back with
'Cannot open the specified file."
I even went as far as typing out the Word Hyperlink( clicked the sheet and selected Cell A1 on that sheet but it still comes back with the error!
Excel 2010
Excel 2010. I set up a trial balance as following:
1/31/2000 2/28/2000 3/31/2000 ------- 12/31/2012
Acct # 1
Acct # 2
Acct # 3
Acct # 4
I was able to use pivot table to set up the balance sheet and income statement.
1. now each month is a field which I can choose to add to the report, but the field list is getting too long (and growing). Is there a way I can insert 1 field (for the user to input the exact date) or 2 fields (to input year and month) and the pivot table can pick up the input and refresh either automatically or manually.
2. I looked into the "group" function in pivot table, but how do I group the above data in quarterly and yearly fashion so the user can get those information quickly?
Excel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
I have a IF statement like this:
If (Range("D29").Value > 0 Or Range("e29").Value > 0) Then
D29 is an empty cell and E29 is zero. The IF test returns true. Does having an empty cell make it non-zero for an IF test?
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedWrite if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View RelatedIt has been awhile since I've worked on anything and I can't remember how to do something that is probably very simple. I have placed an option button on my worksheet and cannot for the life of me remember how to change the properties. When I right click and select properties a box pops up but there is no info there. I want to be able to change the name and group etc.
View 3 Replies View RelatedColumn A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?
I need to return the value from pivot table. Forgot to mention this.
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
How do you changethe font size in acheckbox in excel 2010?
View 1 Replies View RelatedHow do i change the background colour in a list box?
An example is attached.
I have three worksheets Sheet 1, Sheet 2 and Sheet 3 with three Pivot Tables
Sheet1 - Sheet1Pvt1
Sheet2 - Sheet2Pvt2
Sheet3 - Sheet3Pvt3
When I use In Sheet 2 the following lines of code
Private Sub Worksheet_PivotTableChangeSync(ByVal Target As PivotTable)
Application.EnableEvents = False
Application.ScreenUpdating = False
MsgBox "The pvt table refreshed " & Target.Name
Application.EnableEvents = True
Application.ScreenUpdating = True
End Sub
and even If I Refresh Sheet 3 pivot table, Sheet 2 Event is triggered and it prints "The pvt table refreshed Sheet2Pvt2";
How to restrict the event code only to Sheet 2 and pvttbl Sheet2Pvt2.
I am using Excel 2010 and have a workbook with two sheets - "Risks & Issues" which contains the source data and "Risks - Summary" which contains a Pivot Table called "Dashboard"
I would like to create a command button called 'Refresh Data' which will be on the "Risks - Summary" sheet. When I add a new line to the "Risks & Issues" sheet, I would click the button in "Risks - Summary" and it will update the Pivot Table range.
So far I've tried using some examples found on this site, although with no experience in VBA macros, I'm not really sure what they do; all I know is that they cause an error.
Code:
Sub Refresh_Click()
Sheets("Risks - Summary").PivotTables("Dashboard").SourceData = Sheets("Risks & Issues").Range("A2").CurrentRegion.Address(True, True, xlR1C1, True)
End Sub
[Code].....
I'm relatively new to Excel and I'm currently making a basic spreadsheet for my personal income/spending.
How would I make the "Earned this Month" and "Spent this Month" tabs in the top update on a month to month basis automatically?
For example, in the month of may, it would display may's values, june would be june's etc. etc.
(Excel 2010 w/ Windows 7)
i have done in Word VBA successfully (basically, change the Style for a certain number of lines):
VB:
Dim myRange As Range
Set myRange = ActiveDocument.Range(ActiveDocument.Range.Start, ActiveDocument.Range.Start)
[Code].....
My formula is =IF((C2+E2)>D2,"WIN","LOSE") the new formula if I wanted the cells with "WIN" to be green, and the 'LOSE' cells to be yellow. Excel 2010
View 6 Replies View RelatedI have a pivot table with dates along the x-axis. The data is spread out over 5 years and the spacing between sampling events is not even, therefore, the spacing of my x-axis dates is not even. I want the x-axis to look similar to a normal graph where there is equal space between each month, even if I don't have data for each month. I do not want to group the data to accomplish this. If I click the "show items with no data" it only shows one extra day, not all days or even all months. I have excel 2010.
View 2 Replies View Related
