Excel 2010 :: Pasting Charts To Other Worksheets
Sep 29, 2011
I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.
Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.
As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.
How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?
I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.
View 2 Replies
ADVERTISEMENT
Apr 5, 2012
How I could create a chart (standard column) with an average line in Excel 2010?
View 4 Replies
View Related
Sep 19, 2012
I am looking for a way to manipulate xy data graphically by moving points in an excel scatter plot. This functionality was present in older versions of excel, but I can't seem to do it in the MS office 2010 version.
View 1 Replies
View Related
Jan 15, 2013
I'm working on a macro that does the following:
1. Pull data from the internet
2. Perform calculations on the data
3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values.
- It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts
- I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area
- It works perfectly fine when I step through using F8
- I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait
- Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code:
'Chart variables
Sheets("Summary").Select
Dim ChartRange As Range
[Code]....
View 4 Replies
View Related
Apr 27, 2013
I am using Excel 2010 to create a simple chart. When I enter the information, highlight it and select a chart, the chart area appears blank. It doesn't matter what kind of chart I choose- it still appears blank. I've tried going into the Advanced options and indicating for All objects to be shown and that didn't work.
View 1 Replies
View Related
May 9, 2013
I have some text out of note pad in the following format
"cat" "dog" "bird" "turtle"
"cat" "dog" "bird" "turtle"
There is several lines like this. I need to copy it out of notepad and paste it into excel where every word in quotes is in its own cell. Right now if I paste it everything goes into cell A1.
I am using excel 2010..
View 4 Replies
View Related
Nov 8, 2013
I recently received an .xls book which I then saved as .xlsx (I'm using 2010). There are just under 8,000 rows and 20 columns. File Size 1MB.
The only formulas in the sheet are the ones in a column which I inserted and copied down for all 8,000 rows. Nothing too complicated: no arrays or anything. The sheet calculates fine.
I am simply trying to copy and paste these formulas as values (into the same cells), though at every attempt Excel crashes. I tried on smaller sets of the column and just got it to work for a few hundred rows, though it struggles with any more than that.
I opened a different workbook of mine, and tried the same operation on twice as many cells containing complicated, lengthy array formulas and the action completed instantly.
There is no Conditional Formatting in the book, no code, no 'last cell' issue, no Named Ranges, no external links.
I have even copied the data to a new workbook, then copied the text of just one of the formulas over into this book, added an equals sign, copied down and recalculated, then tried to paste as values again. Still crashes.
Formula:
=IF(AND(N3>1,ROWS($1:1)<>MATCH(M3,$M$3:$M$7979,0)),"Exact Duplicate","")
is far more resource-hungry than I thought, though if that were the case, wouldn't the issue be during calculation (which, as I said, is fine) and not during a paste attempt? No, it can't be this.
View 1 Replies
View Related
Nov 2, 2013
I'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("B2")) Is Nothing Then
Range(Range("B2").Value).Copy
Range("P2").Paste
End If
End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
View 8 Replies
View Related
Jul 19, 2014
I'm using Excel 2010. Is there any solution which cover requirements given below.
1) I've converted a range in to table format (using Format as Table)
2) Need to Prevent pasting on data validation cell.
3) Need to Prevent change in cell format after pasting data (other than data validation cells as mentioned above) from same workbook or other workbook
4) Need to insert row in the table as per requirement.
View 3 Replies
View Related
May 15, 2013
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies
View Related
Apr 28, 2013
I am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
View 7 Replies
View Related
May 21, 2014
Excel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
View 1 Replies
View Related
Apr 13, 2008
Consider two instances of Excel - one with a workbook containing a chart and some VBA code, the other containing a blank workbook. When I paste a chart from the first instance of Excel to the other, all the VBA code from the original workbook is also pasted into a new third hidden workbook in the second instance of Excel! If that weren't weird enough ON WINDOWS XP (but not Windows 2000) if the VBA code included WorkbookOpen or AutoOpen this code is executed in the second instance of Excel, which of course fails if it references sheets that only existed in the workbook open in the first instance of Excel! This is the first time I've seen the same version of Excel do different things on different versions of Windows! Example attached - What's going on!? Auto Merged Post Until 24 Hrs Passes;...note: this does not happen when pasting charts between workbooks open in the SAME instance of Excel
View 6 Replies
View Related
Jul 26, 2013
I have "Worksheet1" with Columns A and B for IP Addresses, then Column C is for a device name.
I have "Worksheet2" with a range of IP Address from F5:I260
When I enter a new device and assign it the IP addresses on "Worksheet1", I would like the IP Address to highlight in "Worksheet2"
This way I can keep track of which IP address I have used. Excel 2010
View 7 Replies
View Related
Oct 4, 2013
I have an Excel 2010 file with 10 worksheets. I would like to set up two VBA codes to attached to a two button; one to hide specific worksheets, the other to unhide. The specific worksheets are:
Calculation Sheet
GL Receipt
Sheet2
View 5 Replies
View Related
Apr 28, 2012
I am using MS Excel 2010.
What I want to Hide two worksheets and leave one worksheet open when I close out the file.
ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file
View 1 Replies
View Related
Jul 9, 2014
Why my code is not working. I am working with Excel 2010. It will only delete the column on the active spreadsheet and not go to next worksheet. Not all worksheets contain the word "Broker".
[Code] ......
Not sure if its something to do with Activecell, try After:=ws.cells(1,1) or passing it in as the active cell stays the same i think.
View 3 Replies
View Related
May 29, 2013
I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.
How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.
How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.
View 2 Replies
View Related
Aug 26, 2013
I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:
Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
[code].....
The problem I have is that the output only have the sheet1!
I am using Excel 2010
View 4 Replies
View Related
Apr 2, 2014
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
View 1 Replies
View Related
May 31, 2011
I upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies
View Related
Jul 29, 2011
We have just refreshed our entire printer fleet to Xerox printers and as part of the project we have selected all defaults to B&W and duplex.
On a multi sheet excel file, If we click print then choose entire workbook and then change the print options to colour, it prints the only first worksheet in colour, and all the others in mono. i have read that excel treats each worksheet separately and does not cascade the changes made made in the first worksheet even if all sheets have been selected.
How can I get them all to print in colour?
We can set up another printer and change the defauts to colour but we dont want to go down that road and have 2 printers installed for each model.
Is there any code out there can will/ can change the properties of the first worksheet and cascade this throughout the workbook.
We use XP and W7 workstations and office 2003, 2007 and 2010. By the end of the year all workstations will be W7 and Office 2010.
View 2 Replies
View Related
Jul 2, 2012
I have 2 lists (excel 2010) that I need to compare (they are currently 2 files, but I can combine them into 1 file with 2 worksheets) if it would be better.
The first list is of "All Students" at our college. The second list is those students who live "ON campus". I need a list of those students who live OFF campus.
The common denominator headers in both lists is: A1 Last Name A2 First Name
I would like to keep the "All Students" list as my master as it contains all the data I need such as addresses.
Ideally, I would like to create a macro or lookup or whatever that will take everyone from the "ON" list and remove them from the "ALL" list, leaving me with the data I need.
View 4 Replies
View Related
Jun 26, 2013
I have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:
Microsoft Excel 2010
Workbook Name: TASERR Model - 06-26-13.xlsm
In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.
View 8 Replies
View Related
Jun 6, 2013
I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
View 5 Replies
View Related
Jan 11, 2010
if marco recording of chart manipulation has been reintroduced in XL2010
View 6 Replies
View Related
May 30, 2007
Is there a way for me to paste one line in multiple sheets at once? I have 65 worksheets in one book and the top line on each of them needs to be the same. How do I not only paste the message in the line in each spreadsheet at once but also keep the format. how to copy and paste with formatting, I want it done all at once throughout the entire workbook.
View 5 Replies
View Related
Jun 9, 2006
I have got a workbook with 20 or more worksheets. Every quarter I need to paste/append new data on these worksheets (which has already got existing data from previous quarters). All worksheets have different rows of data, for eg One worksheet may have 10rows, the other may have 50. Hence when I am writing my code, I cannot specify the destination cell as for eg A11, or A51.
How do I write up a VBA code that looks for the last row of data on these various worksheets and then pastes the new information on the next row(new row).
View 5 Replies
View Related
Feb 7, 2007
I have a pretty slick macro that once ran will save the spreadsheet and copy the input to a master sheet, so far it is very functional. I borrowed most of the code from within this forum, as VBA is not my strong point. My problem being that when the script runs and posts the output to the master sheet, it is pasting formulas. I need it to strictly paste the values in, otherwise my master sheet is referencing hundreds of other worksheets.
Sub Finished()
Dim iReply As Integer
Dim countColumn As Integer
Dim MyFullName As String
MyFullName = ThisWorkbook. Name
iReply = MsgBox(Prompt:="This will upload your tracker and exit, Are you sure?", _
Buttons:=vbYesNo, Title:="")
If iReply = vbYes Then
'If Yes Do This
Application.DisplayAlerts = False...................
View 2 Replies
View Related
Jan 16, 2007
I'm writing code which will copy multiple sheets of information in a workbook (from a report) and trying to paste it onto one sheet in another document where I can further manipulate the data. Here's my code, I've made some mistakes, and I've just been banging my head against the screen try to fix it. I'm erroring at ActiveCell. Offset(1, 0).Range("A1").Select. I'm trying to paste it all in one sheet at the next blank cell in the sheet and then close the document after it's all been pasted.
Sub OpenDataSheet()
'Opens CSS Report
Workbooks.Open Filename:="C:Documents and SettingseichornjDesktopTest and Destroy est and destroy CSS.xls"
'Delete first two sheets of CSS report
Application.DisplayAlerts = False
Worksheets( Array(1, 2)).Delete
Dim mySheet As Worksheet
For Each mySheet In Worksheets
mySheet.Select
'Delete unneeded rows of CSS report
View 7 Replies
View Related
