A Formula To Reference Another Page And Skip Cells To Get To Desired Results?

May 14, 2014

I am trying to find a formula that will allow me to reference another page in my spread sheet. In my scenario the row I am referencing has 5 consectutive numbers after the reference point I would use for a vlookup. These numbers are all zeros except for one number in each row which will be a positive number greater than zero. I want my formula to check the first cell in the row, if it is not a zero it will show that number, but if this cell contains 0, then it moves over to the next cell. If all the cells in the row have a zero, then i just want zero to appear on my summary sheet. I tried to do a vlookup with an IF function, but I couldn't get it to work. I have attached a sample of what the spreadsheet looks like.Example doc.xlsx

View 2 Replies


ADVERTISEMENT

Excel 2010 :: SUMIFS Formula That Produces Desired Results Until Get Last Qualifier Displayed In Red

Feb 15, 2013

Excel 2010

I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:

=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")

The result of this formula is: #VALUE!

View 2 Replies View Related

Copy Pairs From 2 Columns To Formula Reference Cells & Copy Updated Formula Results

Jun 24, 2008

I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.

View 3 Replies View Related

Comparing Cells With Reference Source And Skip Blanks

Jun 25, 2014

I need to compare cell value with information from main source cell.

And I need it to skip blank, return "-" if "-" was entered.

I attached example file for your reference.

View 14 Replies View Related

Selecting All Visible Text (and Results Of A Formula) On A Page?

Nov 9, 2007

I know you can select all cells with a formula.

I know you can select all cells with constants

What about selecting all visible text (and results of a formula) on a page?

View 9 Replies View Related

Skip X Columns In Formula Reference When Dragging Across Columns

Nov 15, 2009

How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.

View 3 Replies View Related

Reference Range Cells From VLOOKUP Results

Oct 22, 2009

I have a workbook where one tab contains the data that I am given:

Project-A data1 data2 date1 date2 date3
Project-B data1 data2 date1 date2 date3
Project-C data1 data2 date1 date2 date3
Project-D data1 data2 date1 date2 date3

In another tab, I have a report where a row containd the project name, and I want to find the maximum value of the dates in the ither tab, where my project name matches the project name on the tab data I am given.

So, if I have "Project-C", I need to know the max of the dates in the row for Project-C; but I dont know what row that will be on in the other tab. For info such as 'data1' I have been simply using vlookup using the project name as a key.

View 7 Replies View Related

Formula To Skip Blank Cells

Mar 9, 2011

I'm looking to create a formula that will skip past any blanks until it finds the latest and most up-to-date value.

Some context: I wish to return a latest estimate value to a cell (A5), and this value is updated quarterly. Let's say that the quater 1 value sits in cell A1, Q2 in A2, Q3 in A3 and Q4 in A4. I wish cell A5 to display the latest estimate as soon as a user updates it on a quarterly basis, but default to the previous quarter's estimate if that latest view is unavailable.

I've tried using some IF(ISBLANK...) combinations but am getting nowhere !

NB want to try and avoid Macros across this worksheet so a formula solution would be best.

View 5 Replies View Related

Change Formula To The Results Of The Formula For Cells That Have Results

May 9, 2006

I have a range that has formulas that are based on other fcells outside the range.

What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.

There could be a marco to run when this process is needed.

example attached

View 9 Replies View Related

Excel 2010 :: Making Portions Of Drag Down Formula Skip Cells

Feb 11, 2014

I have set up a formula to sum data from specific columns in multiple sheets in the same file. The simple formula had worked perfectly until I needed the data from the last sheet. In all of the other sheets the data that I need to pull is all in consecutive rows but in the last sheet the data that I need pulled and added is in every 4th row. The sheet looks like this:

All of the columns I've filled in work fine. The ones blank are the ones I am running into issues with. When I drag down the formulas excel pulls the next consecutive rows, which is perfect for the first four sheets I am summing, but for the fifth sheet (I'll ref the Test1 column) I need it to pull 'Wayne 2014'!C6 and then 'Wayne 2014'!C10 in the next row and so forth.

Date
All Test
Test1
Test2
Test3
Test4
$ Amt.

Jan.16
=SUM(C2+D2+E2+F2)

[Code] ........

The first four sheets look like this, which is why they work fine:

Date
All Test
Test1
Test2
Test3
$ Amt.

Jan. 16
=SUM(C2:E2)

[Code] ........

The fifth sheet looks like this: I only want the formulas from the first sheet to pull the data from the dated rows in this sheet.

Date
All Test
Test1
Test2
Test3
$ Amt.

Jan. 16
=SUM(C2:E2)
=SUM(C3:C5)

[Code] ......

Is there any way in Excel 2010 to get it do what I want? (I am not sure how that one cell became outlined and I do not know how to fix it.)

View 4 Replies View Related

Cell Reference :: Formula To Reference New Cells

Feb 15, 2010

I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.

EXAMPLE:

12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.

View 14 Replies View Related

Formula: Desired Effect Is Under Column 3

Feb 17, 2010

Not sure what formula to use for this set-up:

Col1 - Name_Last
Col2 - Name_First
Col3 - Ref_Name

The desired effect is under column 3, you have "Name_First Name_Last". Attached sample file.

View 3 Replies View Related

Macro - Not Inserting Cells As Desired

Feb 24, 2009

I have two sections to this spreadsheet: 1) the entity section; 2) the order section.

I have created a macro to insert rows in both these sections. The macro appears to work fine for the first section but not for the second section. The problem I cannot solve is in respect of cells D9:D10. The macro is as follows:

View 6 Replies View Related

Cells Display Formula, Not The Results Of The Formula

May 29, 2009

To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?

Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))

View 5 Replies View Related

Look Up A Value In A Range Of Cells And Then Return A Value In A Cell In The Same Row Containing The Desired Value

Apr 26, 2009

I want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.

View 2 Replies View Related

Identifying Cells From The Results Of An Array Formula

Oct 12, 2006

I have a long list (>1000) of increasing temperatures in column A. I use an array formula, {=MAX(A3:A1029-A2:A1028)} to find the largest change between two successive values. What I need to do then is obtain the two values that give rise to that difference (for instance, they might be in A678 and A679). I can't figure out a formula for this.

I can manage it if I insert a "difference" column in B, and use:

=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0)-1,1)
=INDEX($A$2:$B$1029,MATCH(MAX($B$2:$B$1029),$B$2:$B$1029,0),1)

but I'd rather keep the number of columns to a minimum.

View 3 Replies View Related

Generating Text For Cells Based On Results Of Formula?

Aug 14, 2013

So basically I have a spreadsheet that tracks if a patient has turned in there required paperwork within the last 6 months and then changes the cell to white and lets me know how many days they have left until they are due to turn this paperwork in again. Then if it has expired I have a condition format change the cell to Red but I would like to add in the text EXPIRED to the cell. lastly I have Cells that have no data in them gray and I would like to add in red text saying No Paperwork.

I'm hoping this will be my last build of this spreadsheet so I can go ahead and start applying it to the real workbook [URL]

View 12 Replies View Related

Digital Reading - Automatically Insert Values Into Desired Cells

Jul 4, 2012

I have an excel file connected to a digital reader. Values are inputted to cells. What I can't figure out is the formula to automatically insert the values into the desired cells.

In short. First value goes to A1, 2nd value goes to B1. There's a formula (=A1-B1) in C1. The 3rd value from the reader should go to A2. The 4th value to B2. The 5th value to A3 and so on. I believe that I should be putting a formula into B1,2,3..n. What I can't figure out is that formula.

View 2 Replies View Related

Print Pivot Table Results Page Field ...

Nov 29, 2006

i have pivot table that has a field called "supp" is it possible to write a macro that will open up the "supp" drop down box select the first result .print the results of the pivot table. then goto the next selection in the same drop down box and print them results . repeat this until allresults have been printed.

when the pivot table is run weekly the results in the field "supp" will change

View 5 Replies View Related

Print Pivot Table Results Page Field

Dec 7, 2006

in my Pivot Tables page field i could have 20 results. 10 could be customer identification codes
5 material codes, 5 a different material code, i called "inter", and the rest supplier codes, example i05,i05/1,i05/2, fo1,f01/1,f01/2 are both material codes,

what i want to do is have a macro /macros to select and print groups
as follows

1. (all)
2. inter
3 any containing the words i05 and f01 which includes i05/1 etc
4. then the rest

if any does not exsist ignor. if possilbe a macro for each or a drop down box to select

View 8 Replies View Related

Countif Formula: Take Data From One Page And Graph It On Another Page

May 1, 2009

I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:

A B

1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01

I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.

View 3 Replies View Related

Single Formula/Function Return Results To Multiple Cells

Aug 26, 2006

I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?

In plain English, I'm looking for something like

If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")

Obviously this is a very crude example

View 3 Replies View Related

Copy Cells So That Copying Formula Results In References As Shifting Horizontally

May 4, 2014

I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.

So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.

View 5 Replies View Related

Formula On A Page Updated When Any Value On The Page Is Changed

Mar 27, 2009

Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?

For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?

View 3 Replies View Related

Change Empty Cells To Blank Cells (need To Use Skip Blanks Function)

Mar 8, 2014

I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.

Do you got a fast method to make all the empty cells blank?

View 4 Replies View Related

Formula To Reference Another Workbook Using Cells

Nov 19, 2003

I'm trying to do: In Book2.xls, Sheet1, Column A, I have a list of tab names in another workbook (2003 Com October.xls). In column B of Sheet1, I want to utilize what's in column A to pull data from the correct tab in 2003 Com October.xls. Here's what the result should resemble:

******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7=
ABCD1Onyx*IDName**2acgattikhickert**3acgattikhickert**4acgattikhickert**5acgattikhickert**6agomesnbizman**7athomasmweaver**Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Use Cells For Start & End Formula Reference

Jan 5, 2008

I'm using this formula (in Cells D4:D10) to tabulate hours being spent on various testing activity categories (N,O,R,E,U,A,D). Is there a method I can use to permit me to change the range of cells being tabulated using Named Ranges or some sort of substitution?

= SUMIF($C$15:$C$89,C4,OFFSET($C$15:$C$89,0,4))

for example I would like to use the value I present in cell A2 as the starting point (for the range) & B2 as the end point (for the range) of cells being evaluated. In other words the improved formula would look like this.

=SUMIF(A2:B2,C4,OFFSET(A2:B2,0,4)) -or something like that-

See attached for reference!

View 3 Replies View Related

Reference Particular Cell To A Page In Excel

Aug 11, 2013

How to link a particular cell to many pages in excel. In my when i drag the pages, Rollno are not coming sequentially.

Here is my worksheet (Result.xls)

View 5 Replies View Related

Formula Reference Cells & Ungroup Worksheet

Oct 21, 2007

"Enter a formula that adds the total gross sales for the first quarter in cell B6 in the Q1 worksheet and total gross sales for the current quarter in cell G18 in the Q2 worksheet"

**First ungroup the grouped worksheet

How am i going to formula a total gross that i don't even know what is the first quarter? i don't see anything for first quarter? and in Q2 worksheet G18 i already did =SUM formula Ungroup the worksheet? i don't think my worksheet is even group?? how i ungroup it?

View 14 Replies View Related

Results Show Results Of Formula, But Should Be Blank

Jul 27, 2006

I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved