Excel 2010 :: Validate All Cells In Column To Xx / Xx / Xxxx

May 14, 2014

I will get right to it. I am using the following:

=AND(LEN(Y2)=10,MID(Y2,3,1)="/",MID(Y2,6,1)="/",ISNUMBER(SUBSTITUTE(Y2,"/","")+0))

To create a custom date validation formula. But it doesn't work.

I need to insure the user has to put in the format "xx/xx/xxxx" where x is a 0 to 9. I am using Excel 2010 and when I put in a year greater than 1899, my error message pops up. I'd also like to restrict the month to up to 12 and yes the days up to 31. I used the "date" utility but it allows stuff like 4/25 and then puts in this year for you. It also accepted three digits such as 786 and I don't know what that means.

View 13 Replies


ADVERTISEMENT

Excel 2010 :: Userform As Login Form - VBA To Validate Username And Password

Jun 18, 2012

Using Excel2010 in Windows7. I have a UserForm

1: TextBox for Input Username (txtUsernameIn)
2: TextBox for Input Password (txtPasswordIn)
3) Submit Button (cmdSubmit1)

I have a Worksheet
ColA: Username
ColB: Password
And this entire Range A:B, I have named "UserRegister"

I have code, attached to the cmdSubmit1 button on my UserForm. The purpose is to allow access to a veryhidden Worksheet "ADMIN".

The code 'works' if I enter in both the correct UserName and Password (ie: the code completes & Admin sheet opens up).

The code 'works' if I enter in the correct UserName and the wrong password (ie: code completes it's run, my msg pops up to say there is wrong input, unloads the form & sheet ADMIN stays veryhidden).

However, if I enter the wrong username (with either right or wrong password) the code breaks and I get a debug error. I know my code is obviously wrong/missing something etc - but I can't work it out! The line of code highlighted on the break, is between the *** below

VB:
Private Sub cmdSubmit1_Click()
Dim Username As String
Username = txtUserNameIn.Text
Dim password As String
password = txtPasswordIn.Text

[Code] ......

View 9 Replies View Related

Excel 2010 :: Macro To Format All Cells In Column According To Value

Mar 27, 2014

I need Macro to Format all cells in column according to value. The cutoffs are >20, between 21 and 50 (>21;<50) and greater than 51 (<51).

I have macro to consolidate cells from multiple files to single workbook. Now I have to 'color code' the value in all cells in column 'B', all as part of one large macro.

View 1 Replies View Related

Excel 2010 :: Put Named Range In Column Of Cells?

Jun 21, 2014

using excel 2010

I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?

View 2 Replies View Related

Excel 2010 :: Unmerge Cells And Fill Down Values In Newly Inserted Column

Jul 9, 2014

I am using Excel 2010 and have the problem as shown in the attached file.

Input Sheet shows the Data I have at present
Output Sheet is the desired result.

I need a macro which should create an "Output" sheet by doing the following on the Input Sheet

1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.

Please note that the number of Data Rows will vary for each Region.

I have shown two Regions for explanation purpose only. There will be several Regions in reality.

The result is shown on the Output sheet

Merge Problem - Forum.xlsx‎

View 3 Replies View Related

Excel 2010 :: VBA Code For Inserting Text In All Column B-cells Of Multiple Selected Rows

Jul 11, 2012

Software: Excel 2010, Windows 7

What is the VBA code for inserting text in all column B-cells of multiple selected rows?

I am creating a worksheet with a table containing various data related to orders of various materials (this is more or less data gathering from an older, paper-based 'system'). This table spans, columnwise, from A to D and expands downwards as more orders are added. The information in each column is: A=order number, B=type of material and C=material specs. and D=additional comments.

I've set it up so that the only thing I really have to do is to insert the type of material in the cells of column B, and the rest will sort itself out. Instead of having to insert a new row for each new entry and manually typing in the name of the material (these entries are often done in the midst of already existing data), I created several similar, macroed buttons for the different types of materials we use. These macros work by selecting the row of the currently active cell, inserting a new row and then add the name of the material in the column B-cell of this new row. What I am having trouble doing though, is to get the text-entry to work for a selection of multiple cells.

As an example, lets say that I would like to add 5 orders of "Grade A Steel" in the middle of the table - in the row above row 8. With the macro I currently have I can select cell B5, click the macro, and a new row will be inserted with "Grade A Steel" in column B of this new row. This action could be performed 5 times over, but would be easier if I could just mark a range of 5 cells, say B8:B12, click the macro and get the text/data inserted the column B-cells of all 5 of the new rows. So far I've been able to create a macro that inserts multiple new rows, but I've only been successful in filling the column B-cell in the first row leaving the 4 below empty.

View 8 Replies View Related

Excel 2010 :: Formula To Determine If Duplicate Values Exist In Single Column (excluding Empty Cells)

Jun 29, 2012

1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2

Tab 2, Column A, has Unique ID's (6 digit numeric values)

The user manually inputs the ID's on new rows in Column A

Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's

When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).

One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.

I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.

The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.

View 9 Replies View Related

Excel 2010 :: Count Distinct Text Values In One Column If Another Column Equals A Value

Mar 5, 2014

I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.

For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5

The results shoud be: (2) Because I only want to count the P25 one time.

I'm using Excel 2010

View 2 Replies View Related

Macro To Create Worksheet 'xxxx' And List All Worksheets In Workbook

Feb 2, 2009

I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)

View 4 Replies View Related

Excel 2010 :: Color Fill A Range Of Cells If Specific Cells Not Blank

Feb 7, 2013

I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.

I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.

View 7 Replies View Related

Excel 2010 :: Save Cells As They Are / Register Cells With Formatting?

Jul 2, 2014

So i've been trying to do this invoice/inventory/client , I couldn't find a way to somehow register the whole invoice as it is, so i can later print/visualize it if i lost the copy or something.

It would be best if it just stayed stored in a variable and not always visible, and only appeared if i wanted to check/print it.

The whole invoice would be from A1 to F30

Excel 2010 btw

View 5 Replies View Related

Excel 2010 :: Calculating Sum Of Column By Column

Jul 2, 2014

I am making an order for my shop and I want to multiply product price X (Column #1) with quantity Y (Column #2) and sum it.

I have a picture attached : uznSuuc.png

I want it to be A2*B2+A3*B3+A4*B4+A5*B5+A6*B6+A7*B7=Z (Total)

BTW My office version is 2010.

View 12 Replies View Related

How To Validate Dropdown Value On Paste In Excel

Oct 3, 2013

I have a situation where our portal allows user to download excel file. We have tried to avoid Macros in the excel since some users may have macros disabled or security settings do not allow to download the excel document with macro. The excel is formatted particular way and there are multiple columns where the users have to select values from the lists. When the user manually enters invalid entry in the column, it shows error message and prevent user to enter incorrect value.

But when the user paste values then there is no validation occurs, thus it is possible for user to submit the incorrect value back to the portal. We have much complex logic when the user uploads the filled excel file based on the values selected in the dropdowns.

My Questions are,
1. Can we force the validation on paste without using macro?

2. If it is only possible with macro, then what should be done for those cases when the users have macros disabled.

There are many columns, many list values for each column so it gets difficult to validate the entered values on the submission using program since we have many other validations in which case we are refusing the user to submit the excel. So for each not valid entry if we give user error message then that's not good idea.

View 2 Replies View Related

To Validate Special Characters In An Excel

Feb 2, 2009

I need to check whether a description of a certain product in my excel has any of
below special characters
! @ ' " ] [ } { | & $ # ^ ~ %
and also the description should not exceed more than 40 characters.
i tried using the "If" condition but it does not seem to check the same.

View 9 Replies View Related

Validate All Cells Are The Same

Jun 9, 2007

How can I validate that all values in a range of cell are the same, excluding
empty cells?

View 9 Replies View Related

Excel 2010 :: How To Find First And Last Row And Last Column

May 5, 2012


I'm looking for one function for each of these properties that will provide them with negligible overhead in all or almost all spreadsheet data cases, such as the normal spreadsheets, autofiltered data, large workbooks, etc.

By the way, by "first row", I mean the first row after the header row, given that the header row is in row 1.

View 7 Replies View Related

Validate A Particular Format In A String In Excel Without Using A Macro

Nov 18, 2009

I have a string and I have to validate that it is entered in a particular format. The length has to be 12 and the characters should be entered in this format: XX1111/11XXX where X represents alphabet and 1 represents number. The "/" is a part of the string.

I tried using the Data---> Validate function and the problem I faced is that the code turns out to be very long and the formaula cell doesnt let me enter such a long formula. Is there any other way to do this without using a macro?

The formula I was trying is something like this.

=AND(LEN(A1)=12, CODE(LEFT(UPPER(A1),1))>64, CODE(LEFT(UPPER(A1),1))64, CODE(MID(UPPER(A1),2,1))64, CODE(MID(UPPER(A1),10,1))64, CODE(MID(UPPER(A1),11,1))64, CODE(MID(UPPER(A1),12,1))

View 9 Replies View Related

Validate Cells To Only Accept

Jan 19, 2010

I have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!

View 4 Replies View Related

Excel 2010 :: Sort Rows By Column

Sep 25, 2013

I am looking for some to create a simple macro to sort multiple rows in ascending order based on the values in a particular column in the selected range. I want to sort A4:AI1004 in ascending order by column D. I recorded the following macro in Excel 2010:

VB:

Sub sort()
'
' sort Macro
' sort by column D (Sequence #)
'
'
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select

[Code]...

First of all, I think this code can probably be simplified. Secondly, it does not work in older versions of Excel. In 2007 it always ends in a runtime error. How can I clean this up so that it will work in both versions of Excel?

View 3 Replies View Related

Excel 2010 :: Inserting Column Without Formatting

Sep 30, 2011

Whenever I insert a column in Excel 2010 it takes the formatting from the Column to the left. I want to insert a Column without formatting. Just a blank column.

View 4 Replies View Related

Excel 2010 :: Cut Row Based On Date In Column

Dec 21, 2011

I have a fairly large database in excel 2010 that in being updated everyday by a employee. In column A there are a set of dates all in the same format 9/1/2011 what i would like to happen is that if there are any dates in column A then it cut out the row and paste it into Sheet1 (the data is stored in sheet2).

View 6 Replies View Related

Excel 2010 :: How To Aggregate Data From One Column

Mar 2, 2012

I am using Excel 2010.

I have a large spreadsheet with brands and volumes.

Many of the brands run the same processes, so I can consider them as one.

For example:

Brands - Volumes

A--------10
B--------16
C--------18
D--------20
E--------16

Imagine that A and C are basically the same. So the value that I really care about it (10 + 18) = 28
B and D are the same, so I care about (16+20) = 36

The output I need is:

A&C - 28
B&D - 36
E --- 16

Can I use SUMIF to basically say: Sum this IF =A OR or =B ?

Can I apply an IF function with concatenate to merge the A's with C's and B'd with D's?

The spreadsheet is large and this process will apply to many different groups of brands.

View 2 Replies View Related

Excel 2010 :: Unable To Set Column-width?

Oct 5, 2012

From one moment to another I am not able to set the column width doing the following: right-mouse-button click (the column) and choose column width and then type in the desired width The column width is not set this way.

Setting the column width by dragging the right side of the column works well. Also double clicking the right side of the column (auto width) works fine.

I think I have pressed a certain key combination (I am not aware of) to activate this behavior.

How can I re-activate/enable the above (1st) mentioned method to change the column width?

View 3 Replies View Related

Excel 2010 :: Hide And Protect A Column

Dec 3, 2012

using Excel 2010.I have a column (column X )which i want to hide and lock so that only i can access the column.I have some information here i need to hide and protect.Is a code/password a option

View 1 Replies View Related

Excel 2010 :: Column Of All X Should Show In One Cell

May 7, 2013

I have an array, say E6:E9. I have a single cell C6.

I want C6 to show an X, only if all E6:E9 have an X. If only E6 or E8 have X's, then C6 will remain empty. However if all E6:E9 all have X's, then C6 will display an X.

excel 2010

View 6 Replies View Related

Excel 2010 :: Column And Row Match And Index

Oct 3, 2013

Whatever formula I try is returning an error of #N/A

I have two worksheets the first with transport data - customer,collection point, delivery point, haulier and number of pallets - all this information is in columns; the second sheet with the rates show haulier, customer, validity, delivery point in columns and then pallet numbers run across a row with rates tying in underneath. i have simplified this below.

I am just trying to reference all the data and work out what the cost for the variables would be in the example the cell i'm trying to find is H8 (320) -

I have already tried the following and several modified versions:
=INDEX('RATE LOOKUPS'!$E$6:$I$9,MATCH(1,('MASTER DATA'!A:A='RATE LOOKUPS'!C:C)*('MASTER DATA'!B:B='RATE LOOKUPS'!B:B)*('MASTER DATA'!C:C='RATE LOOKUPS'!D:D)*('MASTER DATA'!D:D='RATE LOOKUPS'!A:A)*('MASTER DATA'!E:E='RATE LOOKUPS'!E5:I5),0))

[Code] ..........

View 6 Replies View Related

Excel 2010 :: Drag Down But Update Column By 1

Nov 8, 2013

I have a simple formula

=IF($D116=D1,SUM(D90:D103))

I need to drag this down but as I drag it down, the column needs to be updated by 1.

so it would look like this:

=IF($D116=D1,SUM(D90:D103))
=IF($D116=E1,SUM(E90:E103))
=IF($D116=F1,SUM(F90:F103))

Excel 2010
A
B
C
D
E
F
G

[code].....

View 6 Replies View Related

Excel 2010 :: Insert Column And Add Fields

Feb 10, 2014

I have an Excel spreadsheet that where the headings start in row 5. Data starts in row 6.

The spreadsheet is updated frequently. The headings are always the same but the number of lines of data changes.

D5 = Units1 (field contains numbers or is blank)
E5 = Units2 (Field contains numbers or is blank)

I would like to insert a column to the right of Column E and add D + E in the inserted cell. I would like F5 to be called NewUnits.

Some cells in Columns D and E are blank. No cell in Column A is blank. (If cell A6 is the activecell and you press CTRL + Down Arrow Key -- you will get to the last cell with data in Col A. That is not the case if the activecell was E6 as there are blanks.)

I am using Excel 2010.

View 6 Replies View Related

Excel 2010 :: Move Part Columns Of Data From 6 Columns To Form 1 Large Column In Column A?

Jan 31, 2013

I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.

I need to move part columns of data from 6 columns to form 1 large column in column A.

For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !

Also need to delete unnecessary 'page headers' throughout as in rows 2-6

View 2 Replies View Related

Excel 2010 :: Pivot Table Blank Column?

Jan 27, 2014

Why do blank columns with no information sometimes appear when I prepare pivot tables? Excel Version 2010. I hide the columns, but many times they re-appear on screen or print-outs.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved