Excel 2010 :: Insert Column And Add Fields
Feb 10, 2014
I have an Excel spreadsheet that where the headings start in row 5. Data starts in row 6.
The spreadsheet is updated frequently. The headings are always the same but the number of lines of data changes.
D5 = Units1 (field contains numbers or is blank)
E5 = Units2 (Field contains numbers or is blank)
I would like to insert a column to the right of Column E and add D + E in the inserted cell. I would like F5 to be called NewUnits.
Some cells in Columns D and E are blank. No cell in Column A is blank. (If cell A6 is the activecell and you press CTRL + Down Arrow Key -- you will get to the last cell with data in Col A. That is not the case if the activecell was E6 as there are blanks.)
I am using Excel 2010.
View 6 Replies
ADVERTISEMENT
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
May 3, 2013
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
View 9 Replies
View Related
Jan 9, 2014
Excel ( 2010 ). I am creating a Sales Leads spreadsheet. Within the spreadsheet I have a the following relevant fields.
proposed sales value field ( F2 ), Estimated Close - which will be Q1,Q2,Q3 or Q4 ( G2 ), % Probability ( H2 ) & Q1 ( I2 ), Q2 ( J2 ), Q3 ( K2 ) & Q4 ( L2 ).
F2 = 150
G2 = Q2
H2 = 10%
I want to calculate the actual value of sales based on %prob and put the total into the correct field ( I,J,K or L ) based on what field G2 says. So in this case 15 into field J2. I have attached an example.
View 4 Replies
View Related
Jan 21, 2014
This is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
View 1 Replies
View Related
Apr 10, 2014
I'm keen to add a field to a spreadsheet that populates a cell with the username of the last person who edited the file, as in the system or logon name, e.g. first.lastname syntax.
I would however like to keep this sheet as an .xlsx and not have it as an .xlsm. I have the code to use VBA, but is there way to grab the username without VBA to keep the .xlsx format?
I'm using Excel 2010.
View 1 Replies
View Related
Dec 2, 2012
I put the "Insert new equation" button on my "Quick Access Toolbar" but it is grayed-out, as in, unavailable. The weird thing is, I also have a "Insert Equation" button on the same toolbar, clicking that opens a small menu of ready stored equations and at the bottom there is another "Insert new equation" button, that is also grayed out. However simply clicking the "Insert Equation" icon puts allows me to insert a new equation, as it should be. The same is true for the "Insert Equation" button in the "Insert" tab.
I am working on a new excel file, i.e. it is a .xlsx file with only one sheet. It worked for me before but I did a windows reinstall and now it doesn't.
Also while on that subject in Word 2010 you can put a "Insert Symbol" button on the "Quick Access Toolbar" which, when clicked, opens a small menu of recently used symbols, while its Excel counterpart directly opens the entire Symbol catalog. Any way to put a button on the Excel "Quick Access Toolbar" that behaves like its Word 2010 sibling?
View 4 Replies
View Related
Mar 11, 2014
I've recently purchased an add-in for Excel 2010 called Image Assistant. It allows you to insert loads of images at once and automatically puts them in the cells for you, which is what I need to create quotes for my business. It was painstaking to go through resizing each picture individually so I thought I'd give this a go...
The demo of the program worked fine, except it restricted you to one picture at a time and I have thousands to go through. It resized the picture great and put it in the cell as I expected.
So I purchased the full product. There didn't seem to be an option to just put a license key into the demo version to make it full, and I was sent a link to download the full version, so I did.
When in Excel, I click the icon in the add-ins window and Excel grinds to a halt. It stops responding instantly and then won't do anything until I force close it, at which point it pops up with "Automation Error" and then closes the program.
I've checked DEP settings, trust center settings, add-in settings. I've tried 'repairing' Microsoft Office in case it was an issue with Excel itself but that didn't work. I've uninstalled and reinstalled the add-in several times and it still freezes every time I open it.
Problem signature:
Problem Event Name:AppHangB1
Application Name:EXCEL.EXE
Application Version:14.0.7109.5000
Application Timestamp:522a4031
Hang Signature:31f9
[Code] ............
View 4 Replies
View Related
Feb 5, 2013
I'm using a macro to insert a photo in to a Excel 2010 workbook. If the photo moves location it will no longer display the photo in the document as I belive the photo is being referenced instead of embedded.
If you then use the "Change Picture" icon the photo embeds but how do I get my macro to embed the photo.
Sub InsertPhoto(PictNo)
Dim SH As Worksheet
Dim Rng As Range
Dim MyPic As Picture
Dim sPath As String
Dim PicH As Single
[Code] ......
View 1 Replies
View Related
Sep 20, 2013
I am using this macro below to paste pictures from a folder. This works perfect when run on excel 2007, however it only links image when this is run on excel 2010. How to eliminate the error.
Option Explicit
Sub alex_it_saving_lives()
'get the image folder path
Dim strImagePath As String
strImagePath = GetImageFolderPath
If (Len(strImagePath) = 0) Then
[Code] .........
View 3 Replies
View Related
Nov 28, 2011
I want to import an excel file that has multple columns, however, the first column contains both the Group name and the dates. Is there a way to import this into a table to have each record populate the group to the corresponding date?
BASE Researching Duplicate
11/23/2011 21
E-Team General Pool
11/23/20112120
11/25/20112318
General Pool for SB Activations
11/23/2011429418
11/24/2011251125
11/25/2011485452
11/26/2011452410
11/27/2011415408
View 2 Replies
View Related
Oct 6, 2011
I'm trying to create a macro to insert a formula into a specific cell. The formula is meant to check if a cell has text, and then if it does, search for the text on another page.
I had a go at the code, but keep getting Runtime error 13.
I'm using Excel 2010
Code:
Sub new_entry()
'
' NEW_ENTRY Macro
Dim rowNo As Integer
[Code]....
View 6 Replies
View Related
Jun 17, 2013
using excel 2010, I would like a macro that will insert a page break every time a row is blank. There are two blank rows between each data row which I need to be separated.
View 9 Replies
View Related
Sep 2, 2013
I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies
View Related
Jul 29, 2014
I am looking to insert a drop down box in Excel 2010 which will allow users to select multiple items. At the moment I have data validation drop down lists in other columns, however I need one column to allow for multiple selections.
Basically I have a drop down which allows for a region to be selected, my next drop down (in the next column) I need to allow users to either select "ALL", or multiple countries which fall within the region selected previously. I need a check box so that users can select multiple countries, and deselect if an incorrect country is selected in error.
View 1 Replies
View Related
Jan 20, 2012
Using Excel 2010, I am trying to create a macro to insert INDEX and MATCH formulas on a sheet that reference Tables on the same sheet.
The formula works fine when entered in a cell where I can point to the Table. Now I need to put the formula in a macro where it will automatically reference the first Table on the sheet.
Here is an example of the formula:
Code:
=INDEX(Table1891034445678912822253536[#All],
MATCH($I35,Table1891034445678912822253536[L/I],0)+1,
MATCH(L$34,Table1891034445678912822253536[#Headers],0))
Just look at that Table name!!
The original file has multiple sheets and multiple Tables on each sheet. No naming convension was used in naming the sheets or Tables.
Can I cycle through all the Tables on a sheet and rename each of them? For example, find the first Table on the sheet closest to cell A1 and rename it Table 1, find the next Table and rename it Table 2, etc.
Is there a way to reference Tables based on an index (similar to sheets)? Is there a Table(1) and Table(2) referencing system? Is it on a per sheet basis or across the entire workbook? That is, can there be more than one Table(1) in a file?
Can I start in cell A1 and find the first instance of a Table and return the name or index of that Table?
View 2 Replies
View Related
May 1, 2012
I have a sheet that contains the following columns:
Invoice, Document #, Date, PO #, Part #, Part Description, Quantity, Net Amount
Based on the quantity in the row I need to copy the row, and insert it n-1 times. So if the quantity is 5, I need to copy and insert the data below the original row 4 times for a total of 5 rows of data.
I plan on firing the macro with a button as the data will change month to month.
Using Windows 7 and Excel 2010
View 2 Replies
View Related
Jul 17, 2013
I am after tips on creating a macro in Excel 2010 where it will search a list of folder paths in a column on a spreadsheet and insert a jpeg within the sheet from that folder if it exists. If more than one jpeg exists i would like it to insert the first jpeg only. i have found tips where it will insert images if you know the filename, however I don't have this luxury as file naming routines vary from folder to folder the only constant is that the file is a .jpg format.
View 1 Replies
View Related
Aug 30, 2013
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies
View Related
Jun 14, 2014
We have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
View 3 Replies
View Related
Sep 27, 2011
Just recently My Excel 2010 has decided to not let me right click to format cells, delete or insert rows. I can do these functions from the ribbon, but not via right click. this happens in both existing spreadsheets where I am the author, or even a brand new spreadsheet like in the image below. we have restarted the computer, Uninstall and reinstalled Office and still get same symptoms. I got here thru google but cannot find an answer anywhere.
I am very computer literate and even our IT personnel have looked at this with no answer. as you can see in the image, these options are greyed out.
Running Office standard 2010, Windows 7 pro x64
View 8 Replies
View Related
Jan 17, 2013
I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
View 1 Replies
View Related
Nov 10, 2013
I am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
View 9 Replies
View Related
Mar 5, 2014
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
View 2 Replies
View Related
Sep 20, 2011
Any way I can open a word doc (template) and insert fields from my spread sheet i can do it with an email.
I have a spreadsheet where I keep customers information on and would like to print a receipts.
View 9 Replies
View Related
Jun 20, 2006
I know how to insert, read and manage comments fields in Excel, however I want to be able to refer to a comment in another spreadsheet. For example
Spreadheet One contains a series of figures, against one of which a comment has been attached.
Spreadsheet Two has links pulling information from cells in various spreadsheets including the cell in Spreadsheet One which has the comment.
View 3 Replies
View Related
Feb 8, 2014
CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83
[Code]....
left side pivot created in vb 6.0 & right side pivot table created manually in excel.
i want to generated pivot table using vb 6.0 same as right side pivot.
Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),
[Code]....
View 2 Replies
View Related
Nov 4, 2013
I need to find an easy way to locate an image on my server and upon selection rather than inserting the actual image I need to insert the image path. e.g. "s:imageshighresgreen1234.jpg"
View 3 Replies
View Related
Jul 2, 2014
I am making an order for my shop and I want to multiply product price X (Column #1) with quantity Y (Column #2) and sum it.
I have a picture attached : uznSuuc.png
I want it to be A2*B2+A3*B3+A4*B4+A5*B5+A6*B6+A7*B7=Z (Total)
BTW My office version is 2010.
View 12 Replies
View Related
May 5, 2012
I'm looking for one function for each of these properties that will provide them with negligible overhead in all or almost all spreadsheet data cases, such as the normal spreadsheets, autofiltered data, large workbooks, etc.
By the way, by "first row", I mean the first row after the header row, given that the header row is in row 1.
View 7 Replies
View Related
