I'm looking for one function for each of these properties that will provide them with negligible overhead in all or almost all spreadsheet data cases, such as the normal spreadsheets, autofiltered data, large workbooks, etc.
By the way, by "first row", I mean the first row after the header row, given that the header row is in row 1.
I have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
Why my code is not working. I am working with Excel 2010. It will only delete the column on the active spreadsheet and not go to next worksheet. Not all worksheets contain the word "Broker".
[Code] ......
Not sure if its something to do with Activecell, try After:=ws.cells(1,1) or passing it in as the active cell stays the same i think.
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
I am trying to use the code that can find the last used row in particular column.
Here is the code in module1
Code:
Function LastRow(rng As Range)
Dim temp, temp1
Dim col As Range
With Application.Caller.Parent
For Each col In rng.Columns
temp = Cells(Rows.Count, rng.Column).End(xlUp).Row
If temp > temp1 Then temp1 = temp
Next col
End With
LastRow = temp1
End Function
and code in the range
Code:
=LastRow(V12:V300)
My problem is, this code was working nicely but now it only shows ###.
PS I use MS office 2010
I am using Excel 2010 and I am currently trying to find the Avg Min / Avg Max costs for 4 different groups.. Players, Accompanying, Coaches, Medical.
I need it to get the minimum values from 3 different sections ( I am using custom names for them such as PlayerReg for Player Registration costs ) once it gathers the minimum / maximum values from the 3 different sections it needs to add them together to display the Avg Minimum / Maximum for each group.
At the moment I have =MIN(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Minimum /w Frequent Flier although the minimum value it should detect is $948.75 it displays $1115.
For maximum I have
=MAX(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Maximum /w Frequent Flier although once again this value should be $1174.50
Although for some reason it displays $978.75 - which is the minimum cost. The Maximum figures for the other groups (Accompanying, Coaches and Medical) don't even display values Instead it just has #VALUE! in which I'm guessing I have something wrong with it.
Excel 2010. I have two very large tables of data:
Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:
ItemsGroup ID
apple
pear
grape
fig
banana
guava
peach
mango
Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:
Group IDItem1 Item2 Item3 etc.
214applepeargrape
33fig
7bananaguava
59peachmango
Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".
I have Excel 2010, and a dual monitor setup, with the left monitor being the main one. I have my spreadsheets on the right monitor.
When I open a Find and Replace, the dialog box always goes to monitor #1 (left); I want it on monitor #2.
Is there a way to default it to the "right" monitor?
In Excel 2010, I have a list of numbers with about 7000 rows. I am trying to track the number of times the number "22" appears within 30-day periods, with the end-result being a "count column".
While I could enter a formula manually for the date ranges, there are over 200 time-spans I'd have to enter (list goes back to year 1994). Is there a way to automate this process...
Excel 2010ABCDE1DateNumbers List# of Days AgoCount for number
22205/31/12304305/30/12602405/29/12909505/28/12301202605/27/12391505705/26/12371807805/25/1222210
11905/24/123824051005/23/122227091105/22/123230011205/21/123533001305/20/12383608
[Code] .........
What is the formula for Excel 2010 if I have a text in a cell:
CM/62 Charge MTS/7/5/2013 000
CM/72 Non-Cash Adj MSC/7/3/2013 A15
CM/1542 Charge ADM/6/24/2013 S28
CM/63610 Charge MIS/7/5/2013
CM/527 Non-Cash Adj MSC/7/8/2013 S
CM/1542 Charge ADM/6/24/2013 S2
CM/5623 Charge LTE/7/24/2013 000
CM/1610 Rentup MAF/7/1/2013 S21
I need to get the result for word: MTS, MSC, ADM, LTE, MAF
In an Excel Pro Plus 2010 workbook on a Windows 7 PC, trying to use the "After" argument in a VBA .Find function and it's not working as expected.
I've got the following data in column D:
Row1: Title
Row2: Row2Data
Row3: Row3Data
And using this simple procedure:
Sub FindTest()
If Range("D:D").Find("Title", After:=Range("D1")) Is Nothing Then
Debug.Print "Not Found"
Else
Debug.Print Range("D:D").Find("Title", After:=Range("D1")).Row
End If
End Sub
My expecation is that "Not Found"will be returned, but instead I'm getting the row # (1).
If I change the value in D1 the procudure returns "Not Found", as expected.
If I change the find argument to look for "Row2Data" it returns 2.
I also tried changing the "After" argument to "D2" ... same result.
Finally, I tried using this format: "Range("D:D").Find("Title", [D2])" and got the same result.
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
Is there a way to differentiate the number of unique and duplicate entries (considering multiple criterias) using a formula.
I am finding it hard to describe the request hence i have attached a spreadsheet for reference.
The first tab contains the data where I want the result in 'column J'
The second tab contains the metrics of how to calculate the result.
I am sure this will be difficult to understand at first hence feel free to ask as many questions you would like to [only related to the subject ]
For the record, I use Excel 2007 & 2010.
I have following sheet:
Data from A1: BU1644
I need to check, if in A1:BU1 are any duplicate words.
All the formulas I found deal with finding duplicates downward (like A1:A1000).
Have not seen any formula which works across (from left to right)
Is there an easy way in Excel 2010 either to tag/ and -or remove the duplicate which I could apply and then just copy downward? The formula must work from left to right, because many words repeat downward.
I have Excel 2010 & Window 7. I have 2 sheets of business names, some businesses in sheet 1 may be named slightly different in sheet 2 and not all businesses in sheet 1 are included in sheet 2. I would like to be able to find the closest match (from sheet 2) for the businesses on sheet 1 and return the closest matched business name.
View 2 Replies View RelatedI am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
View 9 Replies View RelatedI have attached sample files as reference. I am using excel 2010
I wish to move all duplicates from one sheet (Orders) to another(Duplicates).
Sheet0 is the original sheet(Orders)
Sheet1 is the orders sheet once the duplicates have been removed
Sheet2 is the duplicates sheet
Sheet3 I am also looking to achieve what is in sheet3 so that the quantity and stock code is all in one row as shown in the example sheet3
Basically I am looking for it to finish up like sheet1 and sheet3
Link to files: [URL] ........
I have two sheets. One is named sheet1 where all my data is and sheet2 where all my values are. I want to do a find a replace on column N (sheet1) using the data in sheet2. Column A on Sheet2 has all the values that are found in column N and column B on Sheet2 has what the data should change to.
So for example:
Sheet1 says the following on column N:
cat
dog
lion
bear
Sheet2 says:
Column A
A1: Cat
A2: Dog
A3: Bear
Column B
B1: 2
B2: 8
B3:15
I want the values on column N to be replaced with 2, 8, 15 and so forth. I use excel 2010.
One of our employees has wrote a VB project in excel 2010 which works on some machines and not others, it comes up with the below error message.
I have checked VB and there are no missing references.
Compile Error: Can't find project or library
Private Sub UserForm_Initialize()
'Empty ClientCodeComboBox
Me.ClientCodeComboBox.Clear
[Code] .....
I can't find the Pivot Table icon in the toolbar. I tried "Insert", I can only see the 'table' icon, but cannot see the 'pivot table' icon. how can I find this 'pivot table' icon, or create it in the tool bar?
View 4 Replies View RelatedI want to use the find function on a range and search for a "," character. If I get a "," I want to return a True otherwise false.
I tried just recording a macro using the find function but no code shows up.
how to use the find feature in a macro, can this be done?
excel 2010
I have got an issue. in MSE 2003, this beginning of macro worked:
Sub Consolide()
MYFOLDER = "D:DATAMypath"
In MSE 2010, it gives me an error: "Can't find project or library"
I really know that my path is defined fine, because it worked perfect before MS update.
I am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
View 1 Replies View RelatedTwo months ago our employer seriously limited the size of our mailboxes. We are "forced" to store emails as msg files on our network. PST archives are not allowed. This naturally sucks, as in Explorer you only have the file names and dates to look for that one particular email amongst hundreds (thousands) of msg files. I was able to compose a program in Excel 2010 that generates a list of msg files from a selected folder, together with metadata (sender, receiver, etc.) and so on.
In a test the program worked fine with 6,710 msg files I could post the code here, but the comments and many of the variable names are in Dutch (I never expected it to work in the first place). There is one thing I would like to add to the program. Sometimes I want to add an email to a new email as an attachment. Nowadays I have to look for the right msg file in Explorer by hand, which is a pitty, because I have the paths and filenames in my worksheet. I can put that in a string variable and let VBA do the looking up.
But I don't know how. I would like to be able to let VBA look for the file in Explorer, select it and then stop. I could then drag and drop the selected msg file in my new email. But all my attempts to find example code end up with code that enables a user to select a file and immediately open it. That is one step too far for me. If the msg file is opened, I cannot add it to a new email as an attachment anymore.
I am trying to perform an SQL query on an Excel worksheet, as per one of the examples in Michael Alexander's book "Excel and Access Integration: With Microsoft Office 2007" and I am encountering an error message.
Could not find installable ISAM
To clear I am trying to pull data from one Excel workbook to another using SQL.
I am using Excel Excel 2010 64 bit.
This is the code I am running.
Code:
Sub GetData_From_Excel_Sheet()
Dim MyConnect As String
Dim MyRecordset As ADODB.Recordset
[Code]....
I have some across a few times that relates specifically to Excel 2010 64 bit is that I need to install the following driver
Microsoft Access Database Engine 2010 Redistributable
However I already have this driver (I installed when I was trying to figure out how to write from Excel to Access).
Why am I receiving this message. It occurs when my code reaches this line:
Code:
MyRecordset.Open MySQL, MyConnect, adOpenStatic, adLockReadOnly
I have to dig out data for all employees first entry and last exit for two months. My raw data is in sheet 1 as under:
LAST_NAME
FIRST_NAME
EMPLOYEE
[Code]...
I am using excel 2010
I have been tasked with trying to find out the permissions on a set of folders on a company network. I know write vba code to manipulate a excel spreadsheet without any problems, but it is when i'm using objects that it starts to go beyond my capability. whilst searching i found this code:
Code:
Sub test1()
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Const FullAccessMask = 2032127, ModifyAccessMask = 1245631, WriteAccessMask = 118009
Const ROAccessMask = 1179817
[code].....
It does a perfect job but puts the data into an html file. i managed to get it to input the data into the spreadsheet as well but i would like to clean this code up so that it is not producing another file (namely the text file or the html file) and just put the results into the excel file I have entered the module into.
I did start to remove the references to any file name, but that is where i run into trouble and it wouldn't run any more due to object not found.
I'm on Win 7 using Office 2010
I'm in Excel 2010, and the cell with the date I want to work from is H22.
I'm trying to get the difference of the (date+12 months)-TODAY() to appear in months and days.
Here's the latest thing I tried (that doesn't work):
=IF(DATEDIF(H22,TODAY(),"y")>=1,DATEDIF(H22,TODAY(),"y")&" yrs, "&DATEDIF(H22,TODAY(),"ym")&" mths,
"&DATEDIF(H22,TODAY(),"md")&" days",IF(DATEDIF(H22,TODAY(),"ym")>=1,DATEDIF(H22,TODAY(),"ym")&" mths, "&DATEDIF(H22,TODAY(),"md")&" days",DATEDIF(H22,TODAY(),"md")&" days"))
I should also probably note that the date in H22 is the result of another function.
=EDATE(G22,12)
I am making an order for my shop and I want to multiply product price X (Column #1) with quantity Y (Column #2) and sum it.
I have a picture attached : uznSuuc.png
I want it to be A2*B2+A3*B3+A4*B4+A5*B5+A6*B6+A7*B7=Z (Total)
BTW My office version is 2010.