i have done in Word VBA successfully (basically, change the Style for a certain number of lines):
VB:
Dim myRange As Range
Set myRange = ActiveDocument.Range(ActiveDocument.Range.Start, ActiveDocument.Range.Start)
[Code].....
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
I'm a fan of the Excel 2010 table styles, but can't figure one thing out. When I create a table in excel (Ctrl+T), I like to reformat it with a new defined style. When I save the style, I can use it while I'm in that instance of excel, but when I close and reopen excel, the style is gone. How to save the custom formats to they are always available?
View 3 Replies View RelatedBasically I first want to be able define around 100 variables such as:
Dog = 1
Cat = 2
Mouse = 3
And so on. The reason being my final data needs to be the numbers for it's purpose but because there are so many I can't possibly remember them all to just type out 23 | 44 | 76 | 2 etc. What I would like to then happen is that whenever I type out the words in a cell it's automatically replaced with the number ID.
So typing in
Dog
Mouse
Mouse
Cat
Dog
would automatically result in
1
3
3
2
1
In those cells when I hit enter or at the end in one go. Is this at all possible in Excel 2010?
I am using excel 2010, windows 7. When i make a new worksheet or update it randomly blanks out lines that already have information in them. It blanks out the row number also.
View 1 Replies View RelatedI have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies View RelatedI'm using Excel 2010. One spreadsheet I'm using has 1048576 lines and is a XLSX file. The other file has 65536 lines and is also a XLSX file. When I try to do a VLOOKUP, I'm given an error stating "invalid reference. This file version cannot contain formulas that reference cells beyond 256 columns or 65536 lines.
If both are XLSX files how do I expand the amount of columns in the one spreadsheet with 65536 lines? I thought all XLSX files had a million lines.
i have a question with regards to the shading of a table in excel 2010.The grey/white shading of the sheet should adjust automatically when lines are inserted / deleted...what would be the most efficient way?
View 6 Replies View RelatedI am having a problem formatting a chart in Excel 2010. My chart has multi-level category axis labels, and I would like to have a vertical grid line separating each major group of categories. In Excel 2003, I could right-click on one of the gridlines and then specify the spacing I wanted between gridlines. In Excel 2010, as soon as I indicate that I want multi-level category axis labels, I get a vertical gridline between each category and I am unable to alter the spacing. If I deselect the multi-level axis label option, I can adjust the spacing between the vertical gridlines, but the axis multi-level label functionality is lost. Is there a way to fix this problem without having to resort to using the drawing tools or text boxes to achieve the desired results.
View 3 Replies View RelatedWhat is the formula for Excel 2010 if I have a text in a cell:
CM/62 Charge MTS/7/5/2013 000
CM/72 Non-Cash Adj MSC/7/3/2013 A15
CM/1542 Charge ADM/6/24/2013 S28
CM/63610 Charge MIS/7/5/2013
CM/527 Non-Cash Adj MSC/7/8/2013 S
CM/1542 Charge ADM/6/24/2013 S2
CM/5623 Charge LTE/7/24/2013 000
CM/1610 Rentup MAF/7/1/2013 S21
I need to get the result for word: MTS, MSC, ADM, LTE, MAF
I have a macro that changes the marker style for all series in a scatter chart, chosen through an input box.
[Code].....
It works nicely, but I want it to exclude any series that do not have markers (i.e. lines used to indicate a reference value). I've tried an if-then statement after the With statement, but it will add markers to any line series:
[Code] ......
Basically, if the series has markers or line+markers, I want it to change the marker style, otherwise do nothing with the series.
i have Office 2010 and an Excel sheet that I need to use as the source in a Word Email merge.
I am trying to avoid the user having to open Word & run the Merge manually by providing some code in Excel to perform the task & create the emails.
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
I'm trying to pass a variable from Word to Excel. Basically I have a Word document with a plain text content control in it. I'll have users populate this field. I know how to create a reference to that content contol in Word VBA that'll tell me what's in that content control (eg.
Code:
MyWordVar = ActiveDocument.ContentControls(1).Range.Text
).
What I can't figure out is how to pass the value of "MyWordVar" to a variable in Excel.
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
I have a word docx embedded within my spreadsheet .
Both are on Office 2010 versions and I have named the embedded word doc
docx = CCPBlank (named range)
sheet = Support Data
I want to open the word doc from within the spreadsheet from a user form I already have created for other module calls.
Any simple VBA code to open the embedded docx?
I have looked a previous posts and not sure they are suitable. I have embedded the docx as I want to ensure only that empty version is opened each time. It also means I only have to send one file (xlsm).
I am trying to take multiple tables from a Word document and import them into an Excel worksheet. Currently I have found two versions that when combined, could yield what I am looking for. The first one imports the table's data from Word, but does not maintain formatting of the table (font, colors, rows/columns etc.):
The next code maintains formatting, but only imports/pastes one table:
[Code] .........
For the second one, I do not like the fact that it is calling a specific Workbook to paste into. If I could somehow maintain the ability to import/past multiple tables while keeping formatting that would be perfect. An extra bonus would be to import each table within the Word document into individual Worksheets in Excel. I am also using Office 2010.
References: [URL] .........
VBA - How to preserve source formatting while copying data from word table to excel sheet using VB macro? - Stack Overflow
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Is there any way to modify the 1st style under the Light category? I like it because it's the most simple but it won't allow me to Modify or Duplicate. Is there a work around to duplicating/copying it? I've tried manually creating a new style but I can't get it to get the lines fills correctly.
View 2 Replies View RelatedI'm looking for the lines of VBA coding that will allow me to change the Font style, size and colour in an email.
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
Is there any way to change font style, size and colour of text in a combobox?
View 1 Replies View RelatedI need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
[Code] .....
I am importing a data table from Excel into word. All works well except for the first column of my data, which contains numbers formatted as currency. I am using a bunch of loops to transfer the data into word, and for each cell the code looks like this:
[Code]....
Is there a way to tweak the code and preserve the formatting when I am importing numbers into word?
I tried the following code but it gives me type mismatch error:
[Code] ....
I want to know if there is any formula to match two numbers which have same digits but are in different style. I have attached a spreadsheet with numbers in column A and Column B. Both columns have the same number just the style is different, is it possible that i get a match based on the digits match and then return the output as correct or wrong?
If all digits match from column A with column B it should show as correct else wrong.
I send a regular file from Outlook which contains a large amount of data, the intention being that the receiptiant will copy this data into notepad or excel. This works fine if it is going to another Outlook user, however one of the users is running Lotus notes and it causes the text to go onto multiple lines . Unfortunatly i am unable to send the files to the users as attachments so i have to send the text in the body of the email
This is how they see the data
31.01.2008|380059||1013259|800766574|S353|300129441|ZLF|300129441|00000|
2353|11000955&770695&PAL_CHEP_FG|152&143&2|customer name |HARDWICK GRANGE|WARRINGTON|WOOLSTON|WA1 4RJ||20080204|S353||
2.875|M3|40|083000|20080204| 2.000|02143970067|ADVICE IF
PALLET QUANTITY INCORRECT Customer reque|MV1080097/1080105|
31.01.2008|380059||1013259|800766580|S353|300215153|ZLF|300215153|00000|
2353|11000654&PAL_CHEP_FG|78&12|customer name |BLACKHEATH
LANE|RUNCORN|MANOR PARK|WA7 1SE|N/A|20080204|S353||
16.865|M3|40|090000|20080204| 13.000|0262 04020801 LOAD
2|DEL MUST BE UNLOADED BY DRIVER ON A 1ST COME 1ST S|MV1080097/1080105|
31.01.2008|380059||1013259|800766584|S353|300129441|ZLF|300129441|00000|
2353|10000294&748060&725762&PAL_CHEP_FG|180&475&240&3|ICELAND FOODS
LIMITED|HARDWICK GRANGE|WARRINGTON|WOOLSTON|WA1 4RJ||20080204|S353||
5.732|M3|40|103000|20080204| 3.000|02143971494|Customer
requested delivery time: 04/Feb/2008 10:|MV1080097/1080105|
There are always 30 records, some are blank, but are always seperated by a | i.e 1st record ends with MV1080097/1080105
I have tried to create a macro for them to use which will seperate the cells into excel using the delimeter but i am stuck on how to manage the multiple lines which dependant on the amount of text within the cells may vary
I tried Conditional format and no luck. (Office 2010)
What I'm trying to do VB is:
If Cell B:B has value of "402" or "up"
and Cell C:C is less >100
Then Change color on Cell C:C to "yello, red, etc" (if C value is <100 no color change)