I have a IF statement like this:
If (Range("D29").Value > 0 Or Range("e29").Value > 0) Then
D29 is an empty cell and E29 is zero. The IF test returns true. Does having an empty cell make it non-zero for an IF test?
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
In my current worksheet, IF(0 = "CS") returns TRUE, but on any other file this same argument returns FALSE. The cells' formats are both general. I want it to be FALSE.
View 2 Replies View RelatedI've been asked to adjust some thing with a worksheet someone else created. On the sheet labeled "Criteria" there is a list of dates and some formulas that use these dates. I can't figure out why the result of the formula is a number, i.e "0"; I thought it is supposed to return "TRUE" or "FALSE". If I insert a new sheet, within the same workbook, and insert the same formula, I get "TRUE" or "FALSE". For some reason, the "Criteria" worksheet doesn't return "TRUE" or "FALSE", it returns numbers. I just need to know why this is happening so I can replicate it in the new workbook I'm creating.
View 2 Replies View RelatedThe function below only returns a true value for cells with a month value of September, but not those with December, March or June. Each cell in Row 1 contains a month. A1 = 9/1/2009. B= 10/1/2009 and so on.
View 2 Replies View RelatedIs it possible to get Excel to highlight a cell when the IF formula returns a TRUE value? (Using MS Office 2003)
View 2 Replies View RelatedI've written (with help from here) and IF statement, as below;
=IF('Raw - NUS'!G45="","",VALUE(TRIM(CLEAN('Raw - NUS'!G45))))
The issue is, that not all cells in my array are "" or a value, some are " " and some are " " which gives a FALSE to the arguement and returns a #VALUE! in the cell. Is there a way I can add an ISERROR to the FALSE, VALUE(TRIM(CLEAN('Raw - NUS'!G45))), result make this blank? I've tried OR, but it doesn't work.
Can an if statement return a formula (e.g. =IF(A1=1,C1+D1,0))
View 9 Replies View RelatedOn sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedWrite if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View Relatedif Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
Column A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?
I need to return the value from pivot table. Forgot to mention this.
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
I've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
Find statement returns empty when i search in a range with XLWhole option enabled
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Range(Cells(1, 1), Cells(5000, 100)).Find(Tar(1, 1), LookAt:=xlWhole)
[Code]..
but when i use Cells instead of Range ,Find command returns perfect result
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Cells.Find(Tar(1, 1), LookAt:=xlWhole)
If f.Column = 11 Then Sheets("Sheet1").Cells(Tar.Row, Tar.Column + 1).Value _
= Sheets("Sheet2").Cells(f.Row, f.Column + 1).Value
End Sub
I am trying to write a formula using If statement to output the result "True".
I have 4 columns (P3, T3, AD3, AK3) that store a value of either "Yes" or "No", I want to check the column if they are equal to "Yes". I have written a formula but it only works for 1 column at the minute, i not sure how to add the other columns into the formula:
=IF(P3="Yes","True")
I am trying to set up a sumif statement with two criteria where if the second criteria is true, the total in the sum range returned is divided by two.
I currently have this:
=SUMIF($G$6:$G$41,"digital",I6:I41)
I want to add in "digital/creative" as a second criteria (from the same criteria range) but I only want 50% of the result of these to be totalled.
is this possible?
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have a nice case to prepare and need weekly riskfree interest returns on the UK treasury bond. Right now I have daily returns and want to convert them into weekly. The problem is, weeks do not always contain five trading days. How can I turn my data into weekly average riskfree interest returns?
******** ******************** src="*********>*********>Microsoft Excel - UK interest daily.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateInterest rateweekday 24-Jan-889.871 35-Jan-889.992 46-Jan-8810.053 57-Jan-8810.094 68-Jan-8810.135 711-Jan-8810.051 812-Jan-8810.072 913-Jan-8810.283 1014-Jan-8810.114 1115-Jan-889.985 1218-Jan-889.871 1319-Jan-889.962 1420-Jan-889.913 1521-Jan-889.864 1622-Jan-889.715 1725-Jan-889.71 1826-Jan-889.762 1927-Jan-889.693 2028-Jan-889.564 2129-Jan-889.555 221-Feb-889.741 232-Feb-889.622 243-Feb-889.643 254-Feb-889.684 265-Feb-889.755 278-Feb-889.931 289-Feb-889.852 UK interest daily [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedI am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".