i have an excel spread sheet (2010) that contains city, st and zip in one cell. i need to separate these into 3 individual cells. My problem is the some of the cities are one, two and sometimes 3 words so using a delimiter of space will not separate them correctly.
View 4 Replies
I have been researching this for 3 days and I cannot find a solution. I have City, State information in A1. I also have City, State information in B1. I need to put them into City (D1) and State (E1).
View 4 Replies View Relatedto automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
I believe many people face is to automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
I have a column that has data like this in it:
cityname, stateAbbreviation, XXXXX
or
sacramento, CA 95814
The tricky part is that sometimes there's a comma delimiting these fields and sometimes there is just a space between these fields.
So, I suppose the script would have to assume a length of 2 chars for the state and when it finds that it knows that what was before that string of 2 chars was the city.
Also, sometimes there is a longer zip with 10 digits code like this:
cityname stateAbbreviation XXXXX-XXXXX
sacramento CA 95814-82202
How might I write some VB code to loop through this column and break up this cell into 3 other cells?
find a code which will rename each tab to equal the content of cell - A2 for example.
This is in a workbook containing one sheet for each week of the year, thus starting 04/01/2013 ( I am in England so 4th January 2013.)
I have found many replies, but all seem to produce errors. As they are several years old, could this be because I am using Office 2010?
Excel 2007-2010. I'm using match(string, range,0) but there must be a limitation on the length of the string since I know the string is in the range but it returns #value as if it is not found. Is there a VBA solution to get around this without having to loop/cycle through the entire range?
View 4 Replies View Relatedhow to match a series of rates for a destination city depending upon the origin city. I have figured out how to match rates from origin city to multiple destination cities but have not figured out how to change the series of rates when the origin city changes. These rates will be calculated on the "calculator" in the excel document depending on the cities chosen.
I have attached a document that shows a simplified version of what I am trying to do.
I have a large database from a central appraisal district. In the database the city is stored as a numerical value. The problem is I need to convert the numerical value for the city to a text string with the actual city name. For example the values to the attached example database are as follow:
excel help forum 2.xlsx
024 = Hurst
026 = Fort Worth
025 = Euless
017 = Mansfield
013 = Keller
The issue is, I need to convert this column of numbers into the string of the actual city name. Is there some type of command, or macro that I could use to automate this process? Attached is a small example copy of the database.
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Is there anyway of formatting an Excel cell so that it is split diagonally in half and you can write different text in each half?
i.e. a week/year cell in Cell A1 with Row 1 being the Year numbers and Column A being the month numbers
I have a table in Excel 2007, one set of data in a column contains cells with data such as = AA701 DIS34 5283000, Z00IS0750 Now these AA codes DIS codes 5283 codes and Z00 codes can all be different!! and they are all within the same cell.
What I need to be able to do is find out which AA code which DIS code which 5283 code and which Z00 code is reported within each cell on each row?
So could I split them out into different cells via VBA? or can I do some kind of lookup that picks up a AA code (for example) ?
The constraints I have is this is downloading from a web query, I do not have the ability to alter the way the original data is coming across, I can only alter it once I have received it - refresh and then alter it again.
I'm trying to create an array formula that returns all the cities in a given state by imputing the state's abb in cell K2. The returned cities go into column J. California has the most cities(430) and the cities are 5000 rows deep.
View 7 Replies View RelatedMy worksheet contains data with the reaction times on a psychological test. Each respondent in the test has 280 rows in my excel sheet.
The 'perfect' length of the row, is from A to M. When an error is made in the test, the length of the row will increase. So the error length can be A to AA.
For me it is important to analyse the error. So I would like to give a perfect row length, the value 1, and an error row length a value 2.
So, in conclusion:
If:
Cell length = A1 - M1? --> Copy A1 B1 C1 (A B Cof that row) to Sheet3, and give D1 in sheet 3 the value 1
Cell length >= A1 - M1? --> Copy A1 B1 C1 (A B C of that row) to Sheet3, and give D1 in sheet 3 the value 2
Simply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
i was wondering if there is a way to display a pop up message that a stating that the spreadsheet is currently updating.
What i have is a macro running on Auto_Open when workbook is opened. I have switch off the screen updating. What i want now is for maybe to have a pop up stating the spreadsheet is updating. Setting screen updating to false means that my excel freezes for a few seconds. I think users might be thinking that excel has crashed and therefore would like to include the message that the spreadsheet is updating its information.
I have an excel file containing 50 sheets which we use as an accreditation test. Each sheet contains one question to which there are several possible answers. These answers (for example, A, B, C and D) are option buttons and when a user selects one, that selection is recorded as their response which is then marked. After answering a question they click a NEXT button to move on and as they move on the previous sheet (question) is hidden so they only ever see the current question sheet.
This has worked well for us for a few years, but we have just noticed some odd behaviour on ONE SPECIFIC sheet. The option button the user selects on that sheet (it is actually question 13 in the sequence) is not stored after the test is completed. However on every other sheet, the selection is stored fine - just this one sheet. The properties of all objects on the rouge sheet are the same as the other sheets. I have duplicated a working sheet and tried replacing the question 13 sheet to try that, but the problem persists.
I tried deleting that Q13 sheet and running the test without it and the same problem occured but this time on the preceeding sheet (question 12) which suggests it is not the actual sheet that is causing the problem.
This is the vb code we have on each sheet
Option ExplicitDim Response As StringDim q13 As IntegerPrivate Sub cmdQ13_Click() q13 = 0
If optq13a.Value = False And optq13b.Value = False And optq13c.Value = False And optq13d.Value = False Then
Response = MsgBox("You must answer Question 13 by selecting one of the options!", 16, "More Information Needed !")
[Code] .....
So in this example there are 4 option buttons and 1 command button. It is no different to the other 49 sheets
i am trying to figure out, how to automatically update time, based on specific city's time zone? Lets say, if the city is dallas, time zone is Central GMT-6. In the next cell, the time shows up as Dallas's local time, instead of local computer time. And this time updates itself after every 2 min.
2ndly, if that city's time is later than 8:59 PM local time, that specific city's cell grays out.
Attach: Snapshot of sheet
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
Depending on the text entered into one cell, I'd like another cell to state n/a. For example, if cell a2 shows the text of cash, then cell b2 would show n/a.
View 3 Replies View RelatedI have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
format a cell depending on the state of a check(tick) box
View 3 Replies View RelatedI have a cell with value mm-dd away team @ home team.. i would want to extract only home team and away team in 2 different cells. i was able to do the home team but not the away team.
MID(A2,FIND("@",A2)+2,LEN(A2))
Here is some examples:
3a Bellio Road OX1 3SN
11 Quebec Avenue IG8 1TZ
Land at Canon Close High St SN1 9AE
12 Daisy Park Road London N1 1PP
21 North Valley Road Hemel Hempstead HP1 2GB
Tilbury Close Aylestone Oxford OX21 7DD
900 Vaughan Road Welling Kent DA7 3PL
Land Between 11-14 Cadogan Road Feltham Middlesex TW18 4NJ
There are no delimiters splitting the address lines so i'm finding it difficult to do text to columns. There are also some issues around validation, i.e. 'Land at Canon Close' is not a valid entry. In some cases, the post code is also missing; where possible, I would like to split the post code (might just be a simple case of using (right,b1,8)?)
I've set up a filing system which saves sheets/ workbooks based on the value of a cell - Range("B1") Everything works great apart from when ThisFile String length exceeds 31 characters which you may know is the max useable character length for a sheet name - I had no idea! 8-0
Is there a way i can check if string length exceeds 31 characters then, if it does, shorten it to 31 characters?
[Code] .....
I'm playing with an excel file that has 3 different spreadsheets and basically the same layout just different product lines on each sheet. I need to find a snipet of VB code to change cell color depending on if another cell is used(filled in) or if it is blank. I'm very limited to my VB skills but can tinker enough to get what I need if someone points me in the right direction.
here is an example of what I'm trying to accomplish using the following Columns:
ItemNo[A], QUOTEREQUESTDATE[b], SUBMITTOSALESDATE[C] APPROVALRECEIVEDDATE[D], RELEASETOMFGDATE[E]
EXPECTED RESULTS TO CHANGE CELL[A] COLOR TO RED CELL:
[b] USED, [C] BLANK, [D] BLANK, [E] BLANK
EXPECTED RESULTS TO CHANGE CELL[A] COLOR TO ORANGE CELL:
[b] USED, [C] USED, [D] BLANK, [E] BLANK
EXPECTED RESULTS TO CHANGE CELL[A] COLOR TO YELLOW CELL:
[b] USED, [C] USED, [D] USED, [E] BLANK
EXPECTED RESULTS TO CHANGE CELL[A] COLOR TO GREEN CELL:
[b] USED, [C] USED, [D] USED, [E] USED
I want to write code for a Checkbox that when checked it fills a cell with a color, but if it is subsequently unchecked, the cell color disappears.
View 9 Replies View RelatedI am trying to split up an excel file that has 18000 lines, i want to break this into groups of 100 lines and retain the original header info on line one for each file. Is this possible to do with a macro. I have NO experience with macros of programming so go easy on me. It would be great if it could autosave as book 1 book 2 book 3 or whatever, file name doesn't matter that much.
View 9 Replies View RelatedHow to create a code formula to calculate the arc length from a given chord length?
If you know the radius of the major circle.
Say the chord is 50mm and major circle dia is 72mm (radius 36mm)
arc from chord.jpg
In my spreadsheet the user has the option to put in a numerical value into different cells, which will update (add to) another. So if we have an initail value of 20 in "I10" and the user puts in 20 in "W12", then I10 will display 30.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
Select Case Target
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + CInt(Target.Value)
Case Is = Range("X12")
Logbook.Show
Range("J10").Value = CInt(Range("J10").Value) + CInt(Target.Value)
Case Is = Range("W13")
Logbook.Show.................
