Updating Time In Realtime Based On City In Preceding Cell
Nov 21, 2009
i am trying to figure out, how to automatically update time, based on specific city's time zone? Lets say, if the city is dallas, time zone is Central GMT-6. In the next cell, the time shows up as Dallas's local time, instead of local computer time. And this time updates itself after every 2 min.
2ndly, if that city's time is later than 8:59 PM local time, that specific city's cell grays out.
Attach: Snapshot of sheet
View 14 Replies
ADVERTISEMENT
Apr 4, 2014
how to match a series of rates for a destination city depending upon the origin city. I have figured out how to match rates from origin city to multiple destination cities but have not figured out how to change the series of rates when the origin city changes. These rates will be calculated on the "calculator" in the excel document depending on the cities chosen.
I have attached a document that shows a simplified version of what I am trying to do.
View 2 Replies
View Related
Jan 30, 2014
I have a large database from a central appraisal district. In the database the city is stored as a numerical value. The problem is I need to convert the numerical value for the city to a text string with the actual city name. For example the values to the attached example database are as follow:
excel help forum 2.xlsx
024 = Hurst
026 = Fort Worth
025 = Euless
017 = Mansfield
013 = Keller
The issue is, I need to convert this column of numbers into the string of the actual city name. Is there some type of command, or macro that I could use to automate this process? Attached is a small example copy of the database.
View 13 Replies
View Related
Jan 21, 2012
I have a project network spreadsheet shown below and in column BT I need to identify each non-critical path task (value in column BS is "N") that has a critical path task (value in column BS is "Y") as one of it's immediate predecessors.
Predecessor tasks are listed with commas separating them in column G. They are also separated out into columns H through Q for another function in the spreadsheet.
Note: Task ID's can be numeric or text
*BGBSBT11Task IDPreceding Tasks * * * * * *(comma seperated)CP?
*12Start*Y*13aStartY*14baY*15dbY*16ebNX17cbNX18fcN*19g*N*20h*N*21ihN*22je,d,i,g,fY*23kjY*24Finishk**250***
View 7 Replies
View Related
May 8, 2014
I need to record time next to eg.: W3 cell,
Now I'm using below formula :
=IF(W3<>"",NOW(),"")
but the NOW function keep updating time itself, is there any VBA code or function that I can use with this formula ?
View 4 Replies
View Related
Jun 15, 2007
I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
View 5 Replies
View Related
Aug 14, 2013
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies
View Related
Sep 19, 2011
i have a built in gps receiver into my laptop. what i am looking for is to simply click a button which will give me the x and y, with current speed if possible. and input to cell a1, b1, c1
im using excel 2007, and window xp pro.
View 9 Replies
View Related
Sep 5, 2013
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
View 9 Replies
View Related
Apr 25, 2014
I've got a simple code that creates a new text file in which progress of the macro is logged. I wanted to add also time stamps at the end of each line, so that the user can see when a given stage of the macro finishes working.
[Code].....
And then, in various portions of the code, after certain jobs are finished, I simply add:
[Code] .....
And it all works fine, only the problem is the time stamp is not updated... So say I run the macro at 10:00 - the time stamp on each line shows (date) 10:00...
View 2 Replies
View Related
Jan 30, 2014
i have an excel spread sheet (2010) that contains city, st and zip in one cell. i need to separate these into 3 individual cells. My problem is the some of the cities are one, two and sometimes 3 words so using a delimiter of space will not separate them correctly.
View 4 Replies
View Related
Nov 20, 2009
Based on the attached I want to make the time automatically count down in MS Excel using VBA.
The attached will give you a flavour for what I want to achieve.
View 3 Replies
View Related
Feb 6, 2007
all i need to write is a code which syncronizes with my update button, which i don't know how to write....whenever i click the update button, all my files will be updates, and at the top elft of the screen would show the time and date of my last update.
View 6 Replies
View Related
Jun 14, 2014
I want to use a formula that will show the value of a cell if one of its preceding cells were a different value.
To be more specific, I currently have
Q2=$C2-J2+(L2*((1/12)*E2))
The value of cell N2 is dependent on the prior formula, but does not directly reference it.
Is there a formula that would show me the value of cell N2 if Q2 were different? For instance, if...
Q2=$C2-100+(L2*((1/12)*E2))
View 1 Replies
View Related
Jan 15, 2014
This has got to be simpler than I'm making it out to be, but I'm stuck. I have a column that is created by a formula that counts the number of times a name appears in a list and prepends the number to the beginning of the name. The result is something like:
A1:
1JohnSmith021488
2JohnSmith021488
1JaneDoe102187
2JaneDoe102187
3JaneDoe102187
4JaneDoe102187
5JaneDoe102187
6JaneDoe102187
7JaneDoe102187
8JaneDoe102187
9JaneDoe102187
10JaneDoe102187
11JaneDoe102187
I need a filter that results in a list of names preceded by "1" (but not 10, 11, 12, etc.) The correctly filtered result of the above list would be:
DESIRED:
1JohnSmith021488
1JaneDoe102187
My autofilter searches for data that begin with "1", so instead of the above result, I get:
UNDESIRED:
1JohnSmith021488
1JaneDoe102187
10JaneDoe102187
11JaneDoe102187
There's got to be an easy way to do this, but I can't figure how to account for the variable number of digits (1 or 2 digits) at the beginning. It would probably work to set up an advanced filter for cells that begin with a number less than 2, but I don't know how to do that.
View 3 Replies
View Related
Mar 19, 2007
I am using the following formula (which I need to adapt) to enter a value in a cell C30.
C30=IF(A30>0,A30,0)
I will need to enter this formaula in column C rows 1 to 300.
The problem is that, in addition to A30 needing to be >0, I only need to enter a value in C30 if a value (>0) is found in column B (B29 going back to B1) before a value is found in the A column (A29 going A1). If a value in the A column is found first then I need to enter "0".
For example, if A30 is >0 and the previous A row A29 is >0, I want to enter 0 in C30.
Another example, If A rows A20 to A29 are 0 and B19 >0, then I want to enter A30 in C30.
View 9 Replies
View Related
Jul 13, 2009
I have two dynamic named ranges that are:
- identically sized;
- single column;
- multiple rows; and
- both start at same row on worksheet.
They are named 'rngTrackingWorkStarted" and "rngTrackingStatusCode". Using VBA, how do I check all the cells in the range so that; if the value of a cell in rngTrackingWorkStarted is equal to "Yes", the value of the corresponding cell (same row) in rngTrackingStatusCode should change to "G"?
View 2 Replies
View Related
Feb 28, 2013
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
View 9 Replies
View Related
Oct 19, 2007
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
View 2 Replies
View Related
Sep 7, 2008
If there is a time value founded in column G.
How can i add in value "1" into specified column H(1000hr-2200hr) or I(2200hr-1000hr) based on the 24hr-time format in column C ?
View 13 Replies
View Related
Jan 15, 2010
way I could perform a basic search for data in a worksheet and have it display information from each column in various text boxes, which will update the relevant column if you changed the text in the box and clicked on a submit button?
For example the form would initially have just a text box named "RefNum". You click the "search" button. It would then search column A of sheet "References" for a result.
If total results are 0, it will show a message box saying "No results found for reference number 'RefNum'". Otherwise, it would make the text fields below no longer locked and populate each textbox with information from column A, B, C & D depending on which row number the RefNum had matched?
View 11 Replies
View Related
Mar 5, 2012
I have data in the (various) formats as follows:
1) Text value here
1. Text value here
1.Text value here
1 Text value here
1)Text value here
Is there a way to take the cell contents from the first Alpha character? (i.e. no punctuation, no numbers). There are other numeric characters in the text values that I would like to keep.
View 5 Replies
View Related
Jun 9, 2014
I have a number of tables which I update on a weekly basis and I've created a number of graphs based on these values, but I only want the graphs to show the previous full months complete data rather than the most recent update. Also, I'd like the graphs to automatically update from the table at the start of each month for the preceding months complete data without me having to re-select the data range each month.
View 1 Replies
View Related
Dec 18, 2008
I am working on a spreadsheet that is essentially a question and answer based document .... I need to set up the macros so that if a certain response is chosen from a list, it will automatically update the cell / row next to it with a pre-determined response ....
The way the spreadsheet is set up is that the first column has the question, the second column has the answer (yes, no or N/A - from data validation - as a list) and the third column is blank - but is titled "comment/action" .....
For example: if the question is "have you locked the car" and the answer column selects "NO" then I want the "comments/action" to come back with "you need to lock the car", and if the answer is "YES" then I want the comment/actions column to remain blank ...... The same with N/A ......
I will have around 100 questions in the document ...... I know I need to set up the responses on a separate worksheet - i just dont know what the macro's are to identify and place the appropriate response from the worksheet to the relevant comment/action column .....
View 10 Replies
View Related
Feb 10, 2010
I have one sheet to act as a splash page for user input. The second sheet stores all relevant data. My goal is for the user to input a numerical value in a cell (or input box) and then click a submit button. The code for the macro should look at a cell on sheet 1 which displays the primary key of the row in the table on sheet
2. Based on that primary key, it should look to sheet 2 and then insert the value into the table in the correct row and column. The column headings are the days of the week, and the specific day the user is concerned with is also displayed on sheet 1.
Sheet 1:
A1 = Day of the week
A2 = Unique primary key
A3 = user input value
Sheet 2:
table
Rows=primary key (001 - 999)
Columns = days of the week (Monday - Friday)
example:
user inputs '5' on sheet 1 with 'Tuesday' and '007' selected in their respective cells. I would then like 5 to be copied to B7 (row 7 for 007 and column B for Tuesday).
View 2 Replies
View Related
Oct 1, 2013
I have 9 pivot tables on different tabs that I would like to update based on a date I reference (date input in A1 ex. 9/1/2013). Is it possible to update the filter on all of the pivot tables by referencing a cell that would be the filter (date), so the pivot table will only return values for the date entered in A1?
View 6 Replies
View Related
Sep 5, 2013
I have
Userform
Textbox1
Textbox2
textbox1 containing the province
textbox2 containing the city
If didn't click any value of province the city textbox2 don't have any value and if i click the one of the province the city will now have a value . Is that possible
Here is the picture : [URL] .....
View 6 Replies
View Related
Jan 8, 2009
If I use =now() in a cell it will enter the current date and time. For shift workers, this does not work.
I'm tring to figure out a formula that will only change the date at 6:00am every day. This way a person working the night shift will not see a change in the date on his sheet at all, only the day worker.
View 5 Replies
View Related
Jan 14, 2009
I have a sheet that I want to calculate what time a shift starts based on a cell shading.
Basically Cells C6 and D6 need to be auto calculated based on the cells that are shaded from G6:L6
Look at the Attachment and you will see what I mean.
View 8 Replies
View Related
Dec 28, 2009
I have a spreadsheet with date and time values of the format
"dd/mm/yyyy hh:mm" in column A followed by some other data in cells of that row.
What I'd like to do is have a macro that will delete a complete row if the time value in column A lies between two times that I can specify in the macro (the dates are irrelvant)
View 8 Replies
View Related
