Excel 2013 :: Filtering Data For Mailing Label

Feb 22, 2014

I'm having trouble filtering a large list of 900 names to create mailing labels for anon-profit organization. For years I have been using Microsoft Works to create these labels, however, the people now doing the membership insist on using Excel. I have Office 2013 and am using Excel 2013 on a new Dell PC using Windows 7. I have partially solved the problem but have one hang up.

I got to a point where I could filter out the dates and a couple of other items, but can't seem to get the last two. I was able to get the minimum date (equal to or greater) than 2012 to filter and the (equal to)LIFE (life membership) one and the (equal or greater than) ID# of 9000to filter by changing the cell format in all of those columns of cells to "text" instead of "general", BUT I still can't get it to (be blank) for the M column which houses a "D" or "U" (indicating deceased or uninterested) and an E column which houses an "E" if the person receives the newsletter electronically rather than by mail.

My fieldset up is:

To Year is equal or greater than 2012
Or M Class is equal to LIFE
Or ID# is equal or greater than 9000
And M is blank
And E is blank

The first three work but the last two do not seem to filter properly.

View 8 Replies


ADVERTISEMENT

Excel 2013 :: Chart Label Not Displaying?

Jun 8, 2014

I have a workbook, which I use for different departments that displays a number of different pie charts and I have found that a particular pie chart omits a specific label repeatedly. The pie chart displays the wedge within the chart itself, but does not display the label. At the moment I have data labels with percentages. All other labels display, of which there are 7. I found a solution that fixes the problem each time it arises and that is to select Chart Tools/Format/Series 1 data labels and then Format Selection. When I then select any data label, I click on "Clone Current Label" and the missing label appears with the correct percentage amount. I use the workbook for multiple uses and rather than have it present as a template (*.xltm), it is a macro-enabled spreadsheet (*.xlsm). Could this be related to the problem?

View 2 Replies View Related

Excel 2010 :: Data Label On A Chart

Jun 23, 2014

I make a bar chart from series of data from cells.

The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.

When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.

Even after I change the format of the data label it will still show '.' At the of the value.

How to hide the '.' On the data label if the decimals value is .00?

I'm using MS Excel 2010

View 6 Replies View Related

Excel Not Showing 0 Amounts As Data Label In Charts

Feb 17, 2009

I am building automated solutions where graphs source data is based on outcome of formulas. In case of line graphs I use #N/A as result if no data is available or formula results into an error - this way the data point and data label will not be shown in the graph.

However this does not work for bar graphs - with #N/A, #DIV/0, 0 or "" the bar itself is not shown but the data label is shown (as #N/A or 0). How can I set-up my formulas so that if result is 0 or formula is in error that the graph does not display the data label.

Attached excel file shows same data in 2 charts - 1 line chart (=OK) and 1 bar chart (=not ok). The data for chart is pulled from 2 other tabs (week&month) and merged into 1 data source for graphs.

View 6 Replies View Related

Excel 2013 :: Pivot Table Compare Current Data With Refresh Data And Format New Values?

Jun 18, 2014

vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.

So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.

My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.

Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below

[Code] .....

View 1 Replies View Related

Excel 2013 :: Condense Duplicate Data To One Row Data In Same Column In New Row

Mar 12, 2013

IIn my example I have result data from the 2013 USPGA Tour, ordered by player (column A) with subsequent columns detailing their finishing position in each event.

I simply want to condense each player's performance data into one row - as doing it by hand after each event is very time-consuming.

Is there a way of using a simple formula, macro or pivot table (or whatever) to merge each player into one row, but keep each column in the same position (ie to correspond to each weekly event).

View 4 Replies View Related

Excel 2013 :: Sort Data Not Working?

Aug 14, 2013

Ok just started using Excel 2013.

Trying to sort 3 columns:

Column 1:
A1/B1
A2/B2
A3/B3

Column 2:
Team 1
Team 2
Team 3

Column 3:
1
2
3

Column 3 is just a ranking from 1-30. So I select all the data in columns 1 and 2 and hit sort from largest to smallest and it looks like excel computes, but nothing changes and it doesn't sort from largest to smallest? A

View 6 Replies View Related

Excel 2013 :: Cannot Import Data Into ASP File

Feb 5, 2014

I am using Excel 2013, and I am following the example here: VBScript Scripting Techniques: Read Excel files without using Excel that reads in Excel data as an ADO record set to a classic ASP file using VBScript. I am not able to import all the Excel data successfully, and I need to know what I'm doing wrong. Note that in all these samples cell A1 is the heading text "Column1" and the main data starts on cell A2 (consistent with the example code).

When my source Excel data looks like the following:

Code:
Column1
1
2
3
4
5
6
7
X
9
10

It imports everything OK. However, if I move the X to the next row:

Code:
Column1
1
2
3
4
5
6
7
8
X
10
...the "X" cell gets imported as an empty string. So the imported array looks like this:

Code:
arrSheet[0][0]: Column1
arrSheet[1][0]: 1
arrSheet[2][0]: 2
arrSheet[3][0]: 3

[Code] ....

But if I add another X to an earlier row in the source worksheet, like so:

Code:
Column1
1
2
3
4
5
X
7
8
X
10
...this gets imported OK.

View 3 Replies View Related

Excel 2013 :: Drop Raw Data In And Convert To Useful Data?

Nov 27, 2013

I'm trying to figure out how to copy raw data from one file(emailed to me) and paste it to my existing file "File b" into a table "tbl a"(to make it dynamic). From another table "tbl b" on another sheet within in "File b" I want to auto populate "tbl b" with all the records from "tbl a" but not all columns from the records. To make it more difficult, I want to edit some of the data and the headings between the two tables are not the same. Example below.

Ship-to-name
Product Name
Date Shipped
Customer Group

ABC-Atlanta
Advil (Ibuprofen) 800MG
11-15-2013
Wholesaler

[code].....

Notice column b has different heading and the data need to be modified. Column d is not needed at all.

Also this need to happen when the raw data is copied into "tbl a" and again all records need to be copied over with changes.

This also needs to be done outside of VBA if possible using just formulas and possibly filtering.

I'm using MS Excel 2013

View 3 Replies View Related

Mailing Address Pasted From Internet To Excel And Then Mail Merge With Word?

Jul 26, 2013

I'm trying to use Word mail merge with Excel to create mail labels and letters for each person on the list. For example,

Johnson, Michael
7391 Wilson Street
Van Nuys, CA 91405

I want to create a mailing label for this person. If possible, I'd like to make the top line of the address "Dr. Michael Johnson," however the format that I'm copying from is last name, first name. And I also want to want to create a letter that starts with "Dear Dr. Last name," such as "Dear Dr. Johnson." This is the website that I want to copy the addresses from:

Doctors in Los Angeles, CA | Primary Care Physicians and Specialists

I have done my homework, but I don't know how to properly paste the addresses into Excel and then use Word to create the labels and letter. I have tried many ways, but I have been unsuccessful.

View 1 Replies View Related

Excel 2013 :: Transpose Data Cells And Formulas?

Mar 3, 2014

How do I transpose a horizontal reading excel into a vertical reading excel and transpose all of the data and formulas?

View 1 Replies View Related

Excel 2013 :: Unable To Create Data Form?

Feb 7, 2014

Excel 2013 on a surface tablet and attempting to create a data form. I've followed the necessary steps to try and add the "Form" button to the quick access toolbar, but "Form" is simply not a listed command. Have looked in "All Commands", "Commands not listed in the ribbon" and "Data Tab" and it's nowhere to be found. Not greyed out, just not there.

Frustrating because it's so easy to create a form on past versions of excel. All the tutorials I've seen online explain how to add "Form" to the quick access toolbar

View 1 Replies View Related

Excel 2013 :: Importing Data And Maintaining History

Aug 5, 2013

I have to import data from an external source(oracle database) to an Excel(2013) table.

Now the data in the staging table in the database keeps refreshing/changing, However in Excel i need the data to come into a new row everytime instead of refreshing the whole table and looking like the staging table in the database. So basically i need to build history in Excel.

View 3 Replies View Related

Excel 2013 :: Populate First Worksheet From Data Stored In Several Other Worksheets?

Feb 19, 2014

I have made a Rota of sorts using Excel 2013 Desktop Edition for my charities volunteers (and stored it as a shared file via office 365 server that they can download and edit) and this rota is populated by our volunteers manually. Each day our controller needs to check the file to see who is on duty at that time.

How the Rota is populated.(the bit i managed to do myself)

The volunteer (Person A in this example) would open the excel file and go to the month they wish to choose a shift for (ref worksheet: FEB in this example). They would then pick a shift that suits them and click on the cell (ref: F32) that shows a vehicle available, then from the drop down list they select their name and then save and close the sheet.

Rather than our volunteer controller going through the sheet for the current month (ref worksheet: Sheets JAN to DEC) I would like them to use the first sheet in the workbook (ref worksheet: DC Info Page) to get an instant view of which volunteer is currently on shift.

My current problem

I don’t know how to make the excel file do the following

Search sheets JAN to DEC (ref cells: C4:I58 on each sheet) inclusive for the cell that contains today's (current actual) dateCopy the 8 (eight) cells below the cell that contains today's datePaste the copied cells in to the relative cells (ref: C8 to C15) in sheet one (ref worksheet: DC Info page)

I would also like this to be done automatically so the controller does not have to click on anything after they open the file. But if it needs a button to process the request, one could be added to the worksheet (ref: DC Info Page)

View 1 Replies View Related

Excel 2007 To 2013 Not Allowing Data To Be Added To Cell?

Sep 10, 2013

I have created an Excel spreadsheet in 2007. When a friend opens the workbook in Excel 2013, It does not let him add data to the cells. ( just one column which is the "date" column) The worksheet is not locked or protected.

When I right-click on the column and goto format cells, protection, the box is ticked, but the note says this doesn't take effect unless the sheet is protected witch it isnt.

View 6 Replies View Related

Excel 2013 :: Using Barcode Scanner To Input Data Into Spreadsheet

Nov 14, 2013

I am using Excel 2013 and would like to input data into my spreadsheet using a barcode scanner. I've created some barcodes using an online barcode generator (Code 128-B). My barcodes are text as opposed to numeric. I initially tested it out using Access and it scanned the information just fine. However, when I try to scan in a code into Excel nothing happens, no error, no data, no nothing. Is there something I need to set in the options of Excel to recognize the barcode scanner as the input device? Or is there some other reason why the scanner might not be pulling in the data?

View 3 Replies View Related

Excel 2013 :: Error When Sorting Data With INDEX Formula?

Mar 18, 2014

I've got large set of data(Column E) for dates from 2007 to 2013(Column B). Here dates are in chronological order.(Attachement) Now I want to match the data in to dates in Column H. Here dates are in random order. I used =INDEX(E3:E40582; MATCH(H3;B3:B40582; 0)). But it doesn't work.

View 5 Replies View Related

Excel 2013 :: Highlight Cells If Data In 2 Columns Match

May 27, 2014

Please see the attached example. I'm trying to highlight cells only if 2 values in the row match 2 values in another row. If a book title/author combination matches that of another title/author combination in a different row, it would highlight. Some alternate rows will contain different titles by the same author, and some rows will have like titles by different authors...but they should not highlight.

The only situation where highlighting would occur is if the title/author pairing appears in another row.

I'm trying to decide if this would be a conditional formatting/highlighting rule, or if it would be a macro/vbs?

I'm using Excel 2013.

Pairing example.PNG

View 14 Replies View Related

Mailing Labels With Table Data

May 7, 2007

I want to create labels with data that I have like you would in ms word. I asked the asst. thing in there and it has no idea what I'm typing.

View 6 Replies View Related

Excel 2007 :: Data Points - Filtering Date / Time

Mar 15, 2013

I have a set of data points with date and time shown in the picture. I need to take out all the data point that are at the 30 min interval. Meaning I only want to have the data points hourly only. What can I do to remove the :30 minute datas.

I have tried the find option typing In :30 and getting all the points but then have to replace, which I do not want to do. Need to remove them so they do not show up on the trends ( graphs) I made for them.

This is for excel 2007.

Seems I can't get picture up on the ipad, so the data points look like this

1/1/2012 0:00
1/1/2012 0:30
1/1/2012 1:00
1/1/2012 1:30

And so on for an entire year. Just need to remove the ones with the :30

View 12 Replies View Related

Excel 2013 :: Summarize All Data Into Pivot Table To Have Grand Total?

Feb 21, 2014

I have several competitors balance sheets (around 15), they all have the same structure, what i will like to do is summarize all this data into a pivot table to have a grand total but also be able to filter the data by single competitor.

I have tried to do multiple consolidation ranges, power pivot, pivot but i was unsuccessful, maybe i arranged the data wrong or im not using the right solution. im using excel 2013

View 2 Replies View Related

Excel 2013 :: Presenting Data In Different Columns In Single / Pivot Graphic

Jul 24, 2013

I have 2 columns with a list of competitors (competitor 1 & competitor 2) involved in a negotiation + the price/value of the negotiation. Each line represents a negotiation with a value in numbers & the names of the 2 main competitors involved.

I have around 150 lines in the original file and would like to show in a graphic what are the competitors that we regularly find in the negotiations and what is the value of the negotiations they are involved.

The problem is that there is no main competitor so i can find the same name in any of the 2 columns and i cannot make separate graphs for each column because if i do so i duplicate the value.

Is there any way that aggregate this info into a single graphic/pivot graphic? Im using excel 2013

View 2 Replies View Related

Excel 2003 :: Expanding List To Use In Mail Merge Program To Produce Tags For Direct Mailing

Sep 25, 2012

I have an Excel 2003 list with four columns as shown below:

Zipcode
CRRT
Count
Bundles

85710
C004
693
14

85710
C005
867
18

85710
C006
1021
21

I want to "expand" this list to use in a Mail Merge program to produce tags for our direct mailing. Each bundle contains 50 letters, so in the first line on the above spreadsheet, there will be 13 bundles of 50 and 1 of 43. Currently, I can cut and paste to create the following table, but there has to be an easier way...

Zipcode
CRRT
Count
bcount
Bundle
ibundle

85710
C004
693
50
1
14

[Code] ........

So as I pull this into a mail merge I will get a tag that shows the zipcode, the crrt, the total pieces for that crrt, then number of the bundle for example " 1 of 14" and the quantity in that bundle, for example "50 of 693", then the next bundle tag will print, 3 to a page. I know that here has to be an easier way either in the mail merging process itself or with EXCEL? Am even open to build these with ACCESS to create the tags. The beginning database contains anywhere from 350 to 800 lines of original data, so as you can see the cut and paste is VERY time consuming.

View 6 Replies View Related

Excel 2013 :: Filter Data And Edit With A Search Instead Of The Filter Button

Oct 5, 2013

I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.

[URL]

Picture above to specify the search, which I would therefore like to edit

Dashboard_Action Pool Team 7.2.xlsm

I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?

View 2 Replies View Related

Excel 2013 :: Select Next Row / Extract Data From Next Sheet - Loop To Last Sheet

Feb 20, 2014

I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.

I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.

The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.

Following are example formulas that need to be run on successive rows while pulling from successive sheets.

I am running Excel 2013 on Windows 8.1

View 14 Replies View Related

Excel 2013 :: Averaging Rows Of Data Within Larger Blocks Of Datasets - Skipping Rows

Jul 16, 2014

I am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.

Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.

I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.

Is there a formula/script for me to skip the correct number of rows to the next data block?

I have attached my spreadsheet to this thread. I am using Excel 2013

FeS_Kinetics.xlsx

View 1 Replies View Related

Excel 2013 :: Mail Merging From Excel Database To Outlook

Apr 15, 2014

Using EXcel 2013, Windows 8

I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc

Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?

Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.

View 2 Replies View Related

Pass Userform1 Label Content To Label On Userform2

Jun 13, 2013

I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.

VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm

View 3 Replies View Related

Label Making (take The Information And Incorporate It Into A Label Format)

Jan 14, 2009

I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer

Customer: ABCD
Customer PO: 12345

Part Number Quantity
AB 1
** 15
EF 22
GH 14

and I need it to output:

CUST: ABCD PART: AB
PO: 12345 QTY: 1

CUST: ABCD PART: **
PO: 12345 QTY: 15

CUST: ABCD PART: EF
PO: 12345 QTY: 22

CUST: ABCD PART: GH
PO: 12345 QTY: 14

View 4 Replies View Related

Get VBA To Recognize Label In Userform As Value And Have Another Label Calculate From It

Aug 17, 2012

I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.

This is what I currently have. This returns $0.00 in the label value but does not calculate...

Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""

[Code]....

The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved