what do i need to do when the fill tab doesn't go on to the next set of data. It is just repeating the data in the same column from the first calculation--it doesn't go on to the next set..what do I need to change when inserting my calculations...
View 9 RepliesAlright, so I have Excel itself maximized but the window containing the cells doesn't fill the space that it should... if this makes sense, its like the cells have become a subwindow or something ...
View 1 Replies View Related=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Above is the formula I am working with. I am inserting it into row 4 thru row 996 in a number of different columns. The auto fill function works great for this part of the formula….
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!
However, this part Z29:Z39 I have to enter manually row by row until I can figure out a better way. Do you know an easier way?
To put this formula…
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
Into any column row 4 thru row 996, without having to change Z29:Z39 for every row, since I cannot rely on autofill?
I am using office 2011 for MAC, and am trying to create a macro that changes the color of the selected cell(s).
if I start recording the macro
click the fill color button pull down and change the color on the edit section of the ribbon
Stop the macro
No code is recorded as below but the cell did change color to whatever I selected.
Sub Macro13()
'
' Macro13 Macro
'
'
End Sub
[code].....
The colorIndex is automatic no matter what color I choose.
When I run the macro there is no change to the selected cell, but the border is destroyed.
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
I've got a formula:-
=SUMPRODUCT(--($D$9:$AY$9=$C$9),--($D$10:$AY$10=$C$10),--($D$11:$AY$11=$C$11),--($D14:$AY14))
Cells C9, C10 & C11 contain variable values so the user can choose from Groups A, B, C, etc using a data validation list. For any one variable this works fine. What I'm struggling with is when the user selects "All" from the list. "All" doesn't appear in the data so the formula as written doesn't recognise it and fails. What I'd like it to do is recognise "All" as meaning all entries.
I cannot figure out why the Count function counts blank cells.. Data adjacent to the blank cells were pasted from Access datasheet.
View 8 Replies View RelatedI have a long lists of values (product numbers) from our inventory records. Now, we've been given a new list of product numbers, some are the same and some are not.
I want to isolate (spit out) the values from column A, than don't match column B. Column B is the list we SHOULD be using, column A is what we're currently using. See example below.
Old Products New Products
34544 34544
34545 34546
34546 34547
34547 34548
34548 34550
34549 34551
When I use the formula:
View 12 Replies View RelatedI have a workbook with 3 sheets.
Sheet 1 is a sheet that has a shape with macro assigned to show Userform6.
Sheet 2 contains data that is displayed on Userform6. I use Userform6 to show statistical data that is on Sheet2.
Sheet 3 contains data that is input to ComboBoxes on Userform6 using the RowSource Property.
On Sheet 2, when I select Userform6, the data is correctly shown in all comboboxes and Textboxes......
On Sheet 1 when I select Userform6, only the comboboxes show the data...the textboxes do not show any data.
I do not want users to see the data on Sheet 2 which is why I want to show the Userform on a different sheet as the data sheet will be hidden from users.
Question is: How can I show Userform6 on Sheet 1 with all the data showing in textboxes?
I have a table for gym members and each member is assigned a unique member number.
spreadsheet.PNG
I wish to create a data validation field that wont allow you to leave the cells blank or use the same code twice.
this was my attempt that failed: =AND(ISERROR(MATCH(A:A, A2, 0)) <>FALSE, A2<>""
I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden
View 2 Replies View RelatedI have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.
View 3 Replies View RelatedI have a bit of code that calls a formatting sub depending on which cell is modified. It is triggered by the Worksheet_Change event, determines which cell is modified, and either calls the formatting sub or doesn't based on the location of the modified cell.
Some of the columns in the sheet have data validation with drop downs. If I select a value from the drop down, it doesn't trigger the Worksheet_Change. If I type a value into the same cell, it does.
This was apparently an issue in Excel '97, but supposedly fixed in '03?
STO-Productivity-Feb0314.xlsxI work in cancer research and I'm trying to find a way to show the amount of studies that staff have in total and their role on the study. I have a data table that contains many fields but the crux of what I'm having trouble with starts with the following:
When I begin with a pivot table I start by just selecting the all of the studies listed in the table and then the two roles that staff can have data or regulatory. Staff can do both roles or just one on a study. I put the roles of data and regulatory into the row labels and the studies that we work on in the values. The problem is that I now only see studies that the staff member works on that meet working on both roles and not the studies that they serve only one role.
UPDATE: see the attached spreadsheet to illustrate further. Ablorh is the employee that I have it focused on and it only shows the one study she has both the regulator and data roles. The 7 other studies that the employee works on in the data role do not show.
She has a spreadsheet created in Excel 2003 (she is still using 2003) which contains an image with a textbox in the top left corner then all other cells contain data.
When user prints this spreadsheet all that prints is the image and the textbox.
I have cleared the print area reset the print area removed the picture (prints only the text box)
and none of these changes have changed what prints.
I have checked all printer setting and these appear normal.
previously user could print this spreadsheet fine and all other worksheets in the workbook print fine as well.
other users are still able to print to the same printer correctly from this spreadsheet.
Using Excel 2010, I set up a simple workbook with a spreadsheet on one page and the ranges for data validation on another. I successfully linked the fields in the "Category" and "Tender" columns with the data on the second sheet, making nice drop down menus. Everything works fine on my computer. However, when we open the workbook on a different station, the drop down menus disappear. If you highlight any of the "Category" or "Tender" fields, the little drop down prompt is missing; they behave like regular, un-formatted fields. It appears that the data validation became un-linked.
We tried opening versions with certain fields locked (Mainly the Total, Breakdown, and Summary areas, but the fields with data validation were still editable), and also completely unlocked documents. Every time, the drop down lists were lost when opened on different stations.
I've attached the completely unlocked version : 00_FLEX TRAVEL EXPENSE REPORT_v3.xlsx‎
Forget to check a box or something? This seems way harder for me to figure out that it should be!
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
View 2 Replies View RelatedAll the Prod ID's are unique in column D and the base price in column E varies
I need to fill down columns A,B and C with the data from D and E
A quantity value of 4 in column A reduces the base price by 4, qty of 10 by 9 for all product ID's
Columns D and E have over 1,000 rows
*ABCDE1pbQuantitypbProdIDpPriceProd IDBASE PRICE21LG2_button_phone49LG2_button_phone4932LG2_button_phone
49Avaya_2050_phones7943LG2_button_phone49proV_nec750ip4954LG2_button_phone
45proV_nec730ip4965LG2_button_phone45proV_nec710ip4976LG2_button_phone
45proV_tosh5132fsd4987LG2_button_phone45proV_office_phone4998LG2_button_phone
45proV_cheap_office49109LG2_button_phone45PRO-CISCO6921551110LG2_button_phone40PRO-
[Code] .........
I have data like Data have
entryxy
112
2
3
445
5
6
789
8
91013
10
for example i want to fill the 2nd row with data from first row, same way 5th row also with data from 4th row like 7 and 10. I am expecting my data table should have like this finally Expected
entryxy
112
212
3
445
545
6
789
889
91013
101013
Attached file : row fill.xlsx‎
I have enclosed XLS sheet where you can see line [in highlighted] that a blank. I need a macro to search for such blank cells and fill it with the data on top of it, example A5 = 4, B5= blue, A12= 1 and B12=golden.
View 7 Replies View RelatedI have the following within a macro:
Code:
ActiveCell.FormulaR1C1 = "=WEEKDAY(RC[-2],2)"
Range(Selection, Selection.End(xlDown)).Select
Selection.FillDown
Calculate
I want to add to it so that it only fills the formula down as far as there is data in the column to the immediate left. (eg this fills down column C as far as the data goes down in column B).
I have a button that when I select it, I want it to insert a new column on a different worksheet, enter a numeral, and them fill down to the last column with data. I have the insertion and entering a numeral to work for the button but I can't get the numeral to fill down. I am working with Excel 7 and have posted the code that I have.
Private Sub StepFiveB_Click()
' AddClient Macro
Windows("Final.xlsx").Activate
[Code].....
I am looking to fill in data in a column C that is in between a start and end "trigger" in a separate column B with a constant value (10). Additionally I would like to have a constant value (50) populate another column for a count of 5 cells from the End "trigger".
A
B
C - working
D - clean
1
.39
Start
2
28.07
10
[Code] ........
on a form i have a combo box and on that combo box change event i want the following to happen. If the cboBox value = a company name then search database till you find that company name and then insert the companys details into a specific cell. So is that possible. im sure it is. I think it needs to be done by first checking the value of the box and then searching the database for that value. and lastly telling the cell it needs to be inserted into.
View 4 Replies View RelatedI need a macro that is able to fill down data in a selection. For example, in “A5” I have “BB Total” in “A8” I have “CV Total” and in “A13” I have “GH Total”. I need a macro that will take A5 and fill it down to A7, then take A8 and fill it down to A12, then take A13 and fill it down to the next one, and so on. I attached an example. Sheet one is unfinished and Sheet two is finished. I want to be able to select the data the macro runs on. I highlighted in Yellow what I would like to be able to select before I run the macro.
View 3 Replies View Relatedhow to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
I have a userform with listview control with 8 textboxes. i need to add data from textbox to listview before saving the transaction.
presently i have this code.
VB:
In my userform_initialize i have the header And columns For my listview
With ListView1
.View = lvwReport
With .ColumnHeaders
[Code]....
I have fixed data:
Michael = Resident
Joan = Intern
Patricia = Consultant
James = Nurse
what I want is every time the name (eg Michael) appears in column A, the title (resident) auto fills in column B. Do I need to put a data source for this?