I have a data sheet with 20 columns and about 300+ rows. In the results sheet there are 3 criterias (from column A, B, H in datasheet) which are in the form of dropdown in cell A1, A2, A3.
I would like to extract the data from the data sheet based on the criterias selected from dropdown list, to results sheet starting from row 6, with only 12 headers out of 20 (non-continuous, e.g. columns A-C, E, G-K etc.)
I have a raw database that contains various data all in one column and I only want to extract certain data to a new column. All I want is to extract the time, like 14:00, 14:15, 14:30, etc...... from column "A" and populate column "D" if it meets this criteria.
I have tried everything I can think of, very difficult yet it seems to be so simple.
The "date" is really a date format but the "time" is really text.
Here is what the data looks like:
Column A has....
Name1:
Name2:
Name3:
10/16/2006
14:00
14:15
14:30
14:45
15:00
10/27/2006
16:30
16:45
17:00
What I am trying to do is extract all the data from a excel database based on criteria. When i specify the site and month I need to pull all the corresponding data and write it to a worksheet. Below is an example. I am not allowed to show all the data it is confidential.
Site Date Operator Month
Chicago 12/3/11 Daniel December
San Jose 4/8/12 Mike April
New York 4/8/12 John April
How can I extract rows from one sheet into another, based on certain criteria?
View 1 Replies View RelatedI have a table with multiple columns. I would like to extract a sublist from column A, based on 1 criteria (<94) on column J. I used the index-array-row array function, however, it does not give me the intended result. It repeats the same name.
My final intended result is to extract the whole row based on criteria on column J.
In the attached, sheet 2 has a formula that pulls the Item (column B) from Sheet 1 based on Instocks (column F) being less than the value in N2. Would it be possible to add a second criteria to the formula in sheet 2? In short, can I pull the item from column B of sheet 1 into sheet 2, where in sheet 1, column F values are less than N2 AND where column G values are greater than O2?
I'd love to just vlookup the fill rate value and then filter it down, I know at some point I will be asked to weed it down a bit via a formula instead.
I'm trying to extract a list of names from an Excel 2010 table based on two criteria, thus:
=IFERROR(INDEX(Database[FullName],AGGREGATE(15,6,ROWS(Database[Age]-ROW('Database'!$A$2))/((Database[Age]>1.8)*(Database[Age]
I have an excel sheet which has 200 fields and 1000 rows, now I want to make summary of them, so I need some fields to be extracted from those 200 fields to another sheet on multiple criteria, Like Category, First Name, Last Name, District, Village, Date and etc.
View 9 Replies View Relatedi want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
No.
Receive Date
PRF No.
Frank No
[Code].....
I have a spreadsheet with 2 tabs:
AllData:
Name
Data
Read1
[Code]....
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
I created a master data sheet to enter data manually to analyze. It contains 20 columns, and rows(continue change, because we enter data all of the days). I need to extract data to another sheet, when the user enters data in the master data sheet, but with some conditions, when the column 6 contain the word ASQ, and then extract all of the data, but the new sheet do not contain 20 columns, because the data that contains the word ASQ have only 16 columns.
View 6 Replies View RelatedI need to create a macro to extract data from sheet1 to sheet2.
The sheet1 contains 15 columns, and the data starts at row 5.
The sheet2 contains 15 columns, and the data starts at row 5.
We enter data all of the days, so we have like 500 rows in the sheet1.
Only 2 conditions to extract data from sheet1 to sheet2:
if the column9 of the sheet1 contains the word "NO" and column11 of the sheet1 contains the word "ASQ".
method to extract certain data from a column of values.
The attached workbook has two sheets. From the worksheet named "Data" I would like to be able to extract any values >0.00% and then display the corresponding "model" (C:C) on the other sheet called "Results". I need to be able to achieve this for each day in the month and disregard all other values so I am left with a concise list.
I have manually entered the info for the 1st June as an example.
I'd like to have a formula in Column C which would extract the quantity from either Column A or Column E depending on the value in Column D.
A ---- B ---- C ---- D----------------E-----------F
QTY -UOM----------Tariff #----------QTY 1-----UOM1
46----PCS---------3402.12.5000----94.3--------KG
85----PCS---------3402.12.5000----174.25-----KG
4-----PCS----------3701.10.0030----4.8---------M2
5-----PCS----------3701.10.0030----1-----------M2
15----PCS----------3701.10.0030----1-----------M2
I have a workbook with data extracted from our ERP (transaction sheet), and a list of cards (card list sheet) which ties the relevant cards to companies and vehicle.
I would like a macro to extract all transactions in the "transaction" sheet into a new file (see "unit" sheet), with the relevant company name, report dates, vehicle number, card no, date, time, polling point name, volume, unit rate. The "Amount" column will be the volume X unit rate.
Vehicle numbers can only extracted from "card list" sheet, and not found in the "transaction" sheet.
these are the details I need:
- all company's transactions details (not sorted in the "transaction" sheet) should be extracted into new individual company's excel file
- headings I need are shown in the "Usage" sheet (company name, vehicle number, etc)
- depending on the number of transactions, there should be a " subtotal" row below the last transaction (as shown) of each vehicle
- with all vehicles extracted from each company, a grand total will be added
- filename should be created with company name
I have a set of data in two columns, i.e. 1) dates and 2) names. Now I would like to post in the third column the name "x" if there is more than 2 years (or 730 days) between the current and the previus observation for name "x".
More specifically:
I would like the code/ function to always include the first "new" name then: 1) check whether subsequent names are equal, if equal; 2) check whether the difference between each obervation and the first "same" name is more than 730 days. The code should also always consider every observation with more than a 730 days difference as a "new beginning" for that specific name.
I have tried to use IF and OR functions but the function becomes too long and it does not quite solve the whole problem. Problems with my function occurs when the names change in column two. That is, my function is not able to distinguish between dates that belong to the same name and dates that belong to different names, when performing the second logical test.
I have attached a short example of my data. The problem is solved manually in the example file, just to give a better picture of what I am actually trying to do (I have a few thousand rows in my real file).
i am looking macro code to extract data from sheet1 to sheet2 & sheet3, with criteria background color :
1) extract data from sheet1 to sheet2 for data contains/highlighted yellow color background
2) extract data from sheet1 to sheet3 for data contains/highlighted red color background
For detail information, see attached workbook : extract after coloring.xlsx
I have some problem with the extraction, I would like to extract the data to another sheet based on variable conditions but I can not do it. My code in just case working if the all conditions are specified. The target is that if want the code could extract the data based on one condition even, or two or three or more.
View 7 Replies View RelatedI would like to extract competition naps from the competition entries and then remove the string ending "nap" from the data so it can be pasted to another sheet in it's 'clean' format.
on the example sheet column B will always be the first column and the range will extend to either G,H or I (always the max range as there are always 6 to 8 races)
i would like the code to search through these columns of data and find the cell ending in 'nap' then to return this in column i, once done remove 'nap' ending from both the source cell and column i.
once done to then go through all the rows and do similar
the end result would be all naps returned into cell j and all the 'nap' endings through the data range B to I (max) to be removed to leave the horses name only.
in book 3 the first row nap was sommersturm so i have shown the outcome i would like with the nap ending in I1 removed and the horse name returned in J1 again minus 'nap' ending.
the data will always be clean with no leading/trailing/excessive spaces and always be lower case too. sometimes a space is not in between horse name and nap but it's always last 3 characters i want removed still.
I am looking some macro code to extract data based on background color (yellow color) from sheet1 to sheet2
for detail like this below :
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
}
[Code] ........
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
Hi, have a question regarding dynamic charts, specifically I am trying to create several dymanic charts based on data in a single column (So i can only say my first set of data will be starting a a set location in the chart, the rest has to shift down based chart data above it). This data should organized in charts depending on the data in several other columns. For instance, need to pull out values from column based some ID and some PartNumber. A sample excel or VBA would be much appreciated. I know VBA but do not know Excel VBA much.
View 9 Replies View Relatedgenerating a formula that takes into account a range of values (an entire row) and from this row, I would like the formula to select, for example anything greater than 80%. After the formula selects anything greater than 8, I would like for it to select cells that are above or below the cells that have values greater than 8.
1
2 JLKNSTTP
3 85934942
4
5
For example, in the above datas, I would like a formula to select anything greater than 8 in row three and select cells above it. In this example it would be j, k, and t.
=if((3:3>8),offset(A3,-1,1,1))
I need to populate data based on criteria.
The criteria has been attached as follows.
Sample Test.xlsx
I need a data validation to prevent entries when they are > 50, but only if the value of another cell in col A is "Payment". The value of 50 is an example, I have another formula to get this number using VLookup.
The idea is that if the value of the cell in col A is "Income", I don't want the entry to be rejected. But if the value in col A is "Payment" or "Transfer" and > 50, I want the entry to be rejected (if I only have $50, then the payment cannot be > 50).
I have a problem and I hope that it can be solved using a macro. Basically, I have a set of data in column A and B in sheet(1):
A
B
1NameDate
2JOY12/09/11
3MAR12/12/11
4DAVID12/12/11
5
I have another set of data in Sheet(2):
A
B
C
D
E
1NameDatesalary
CHARACTERRATINGS
[code].....
basically, I would take into consideration the names and dates in sheet(1) and if it matches sheet(2) then it would then paste their salaries, characters and ratings into sheet(1).
I have a data which i need to total based on document types.
Document types in cells are AB=CELL A1, ZR=CELLL A2, ZP=CELL A3,
SK= CELL A4.And amounts in rows 555=CELL A1, 625 = CELL A2,
725= CELL A3, 925=CELL A4 and so on.
My challenge is to get all the total of ZR,SK,AB type of documents using macro.Initially i used this formula, however now document types are more than one.
=SUMIF([Book1]Sheet1!$C$2:$D$4,"zr",[Book1]Sheet1!$D$2:$D$4)
i have a sheet that i have been creating to pull information based on two things. The criteria is an emplyee # and the second is a date.
The data needs to be organized onto Sheet4. The Employee # will already be on Sheet4, so i have been trying to use that with Vlookup / hlookup with no success as i can't seem to get it to find the correct Date and place the data correctly.
Sheet4 layout:
Completed (with respective data from Sheet2)
A
B
C
D
E
1
[code]....
the data is located in Sheet2 (Emplyoee # is always in Column A, and the Date is always in Column B).
the data needs to be pulled into Sheet4. Essentially making the horizontal data of Sheet2, Vertical on Sheet4 under the respective date column.
Sheet2 Layout:
A
B
C
D
E
F
G
H
I
J
[code].....
I have data in my worksheet as follows
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
[Code]....
I want to create a sum of all values in column B (Data Size) that correspond to the same Dept-div code in column A
Ex: 0667 the total should equal 43268.8 for the two cells.
I need to count all cells in these columns versus a specific range?