Is there a formula to get the Name of the current Worksheet and place it in a Cell? I have a Macro that will create a list of all of the worsheets within a workbook, but it requires indexing through all worksheets. I have not found the command that returns the name of the active worksheet.
View 5 RepliesI am working with 3 different worksheets. Lets say they are named A, B, and C and for simplicity, and let us say they are all stored in C:worksheets (they are actually located on different network drives). I would like for excel to open and extract data from the Machine_List page in each workbook. Then output it to the current sheet that I am working with and just add the data to the next available empty cell on row A. They are also headers on each sheet so I would like to delete it or start copy from cell A2.
View 9 Replies View RelatedI have a worksheet with 30,000 rows. But sometimes even if I have fewer records in this worksheet(lets say 1000) worksheet shows the same 30,000 rows.And its annoying when you try to navigate using vertical scroll bar. Is there any option to re-adjust the worksheet to make it more user friendly based on number of rows in current sheet.
View 2 Replies View RelatedIn cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedI basically need a macro to sort the sheet by V, U, T starting from row 3 and ending before the last vechicle. This is the problem though, the last vehicle ends everytime right before Car # in column A. So in other words in this example i would need it sorted by v u t, starting from 3 down to row 12. It ends at 12 because the next line includes car and a number.
Another sheet might have a longer list of vehicles and might end at row 100 before the next line has car number .
It always starts at 3, but the ending is dynamic where it should stop its selection before "car number ".
I would also like it to work on the current sheet im on, because i have up to 100 sheets like this and would not want it name dependant. Just want to click on a tab, and run a macro and have it sort from 3 down to the line before car in column A.............
What is the code to identify the current worksheet name? I want to store it in a variable so I can return to the worksheet later. I thought that the code was this:
myWorkSheetName = worksheet.name
:
:
Sheets(myWorkSheetName).Select
I receive a "Run-time error 424: Object required" message on the worksheet.name statement.
how to extract the current/active worksheet's file's name using VBA code. Let's say I have a an excel file with the name "Test.xls" Which function do I use to return Test (with or without the extension)?
View 4 Replies View RelatedDoes anyone know the VB syntax for obtaining a table name or number on an existing worksheet? I'm using Excel 2007 and have a worksheet that is one large table. I have a macro which copies the worksheet to a new sheet, converts the table to a range and then edits out the elements I don't require (my macro won't strip out information I don't require if it's still a table, which is why it's converted to a range). However, every time I copy the sheet, the table number increments by one.
For example: Unitlist is the original table name. When I copy the worksheet, the table on the copied sheet becomes Unitlist1. If I delete the sheet and copy it again, the table becomes Unitlist2 etc. etc. In order to get around this, I need to be able to reference the name of the table on the copied sheet and then use that reference to convert the table to a range. I can convert the table to a range using:
ActiveSheet.ListObjects("Unitlist1").Unlist
However, I need an automated way to obtain the table name. I've attached a copy of my macro for further reference.
Sub CopySheetDeleteData()
Dim c As Range
Dim i As Long
With Application
.Calculation = xlCalculationManual
. ScreenUpdating = False
Sheets("Units").Copy After:=Sheets("Units")
' rename the sheet
Sheets("Units (2)").Name = "ExportUnits"......................
I have a spreadsheet that I send emails from. Currently I use the .PrintOut command just before .send and it prints the email to the default printer. Instead of printing to the printer i want to print the email to pdf or any file for archive purposes. I would also like the file to be located on a network drive with a file name from a cell in the spreadsheet with todays date. Is this possible?
Currently the code looks like this:
VB:
With OutMail
.to = sh.Range("A1").Value [code]....
I need the cell address where the cursor is (in a non active worksheet).
View 5 Replies View RelatedI have a spreadsheet that I send emails from. Currently I use the .PrintOut command just before .send and it prints the email to the default printer. Instead of printing to the printer i want to print the email to pdf or any file for archive purposes. I would also like the file to be located on a network drive with a file name from a cell in the spreadsheet with todays date. Is this possible?
With OutMail
.to = sh.Range("A1").Value
.CC = ""
.BCC = ""
.Subject = sh.Range("H1").Value & " " & sarBody
.HTMLBody = strbody & "<br><br>" & "<H3><B>Specific Notes, If any...</B></H3>" & vbCrLf & varBody & Signature
.PrintOut
.send
End With
I put all my named ranges in a seperate worksheet in the workbook.
On a different sheet I have all my data with references to the named ranges. But what it gives me is the cell information from the sheet on which the named range is located and not on the worksheet where I actually need the calculations to be done.
How can I make the named range refer to the cells in the worksheet in which it sits?
Worksheet 1
---------------
1
2
3
4
Worksheet 2
--------------
I name the function Red apples
RedApples =CONCATENATE($A1&"Red Apples")
Worksheet 3
--------------
=RedApples
=RedApples
=RedApples
Question #1
How do I make the name reference in worksheet 2 refer to
the cells located in the worksheet in which i use it. In other words, when I use RedApples in Worksheet 3, it gives me what is sitting in A1 in worksheet 2 instead of in A1 on Worksheet 1.
Question #2
How do I make the name reference in Worksheet 3 keep stepping down along Column A in Worksheet 1?
Formula at issue in actuality is
=IF($S5>0.149,Morethan15,IF(AND($S5<0.15,$S5>0.999 ),Morethan10,IF(AND($S5<0.999,$S5>0.0499),Morethan 5,IF(AND($S5<0.05,$S5>0),Morethan0,IF($S5<0,Lessth an0)))))
the morethan15,10,5,0 and lessthan0 is defined in the last worksheet
I'm a novice at Excel trying to create some forms for work. My goal is to have a working workbook that holds all my values from multiple jobs that gets updated daily with additional worksheets that gets sent to me. I'd like to be able to hit a macro in my workbook that allows me to select a file that has been emailed to me and import their values into mine. For example:
While using my active workbook I want to select a file. Then take cells A1:A15 from selected file and paste to cells F1:F15 in my active workbook.
I have a worksheet that includes a cell that gives the current week of the month, in the form of "Week #". I've been using the formula below for several months and have had no issues until this month, and it's driving me crazy.
Given that cell D2 is the beginning of the week (usually Monday, but at the first of the month it may be a different day):
="Week " & ROUNDUP((DAY($D$2)+WEEKDAY(DATE(YEAR($D$2),MONTH($D$2),0)))/7,0)
I'm not sure where the logic is going wrong here; it's worked so well up until now. For the week beginning November 2, 2009, the formula above returns "Week 2" rather than "Week 1".
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I know you can see it but If set to default when the mouse moves over an object it changes to that object's cursor. Access had a screen property that may have detected this change. Excel Examples On the worksheet the cursor is a cross If on a worksheet you have a shape with a macro the pointer changes to a hand On a shape without a macro the pointer is 6
HOW do you use vba excel to find its current number or send a message when it changes or peek message to notify when it changes
You could use:
If ActiveWorkbook.Sheets.Count < 17 Then
Application.CommandBars("Workbook tabs").ShowPopup
Else
Application.CommandBars("Workbook tabs").Controls("more Sheets...").Execute
End If
The code doesn't do anything on my excel workbook which currently has like 20 workbooks, and it grows daily by like 4 or 5 worksheets.
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
I am trying to populate name a worksheet and select it via values produced from an array. I don't know how to change the value produced from the array to select a worksheet.
Dim arrayTypeCount As Integer
Dim arrayTypeName As Variant
Dim awaitingSheetString As Worksheet
arrayTypeCount = 0
arrayTypeName = Array("awaiting_CP_Response_All_WS", "Repo", "Credit", "Rates")
arraytype = arrayTypeName(arrayTypeCount)
I then want to use arraytype to say arraytype.select
I have a spreadsheet which is an extract from another application's DB, and it's just ugly in Excel. No nice neat columns etc. Data from some tables of the other application were just dumped into cells. Some of the data I need is scattered about the worksheet in various cells. There are no seperators that are common, no common length of text strings I could use to pull every X word etc.
The one common thread I am working with here, is the the data I need to extract ALL begins with the first 4 letters, and containers a total of 8 characters. For example:
A3 - The dogs collar had the name ABCD1234 on it
J9 - Today I found a dog collar at the store, and it read ABCD2345
c5 - It says ABCD3456
I'm trying to basically see if there is a way/function within excel that can go through all of the cells and extract anything that says ABCD? (and the 4 wildcards after it)
The Find all function finds them all, but trying to just extract the data ABCD? info.
I found something similar here VBA - How to select a range in a non-activated worksheet but when I tried to "apply" it, I kept getting an error if the relevant sheet wasn't activated. My code
Code:
Dim SearchRange As Range, FindRow As Range
Dim column As String, search_string as string
column = "K"
[Code]...
What I want to do is to be able to search for a specific value in a specific column on the "Combo boxes" sheet, which isn't activated (the number of rows will never be large, thereof the hard-coded 200).
I get the impression that some sites say the relevant sheet has to be activated, others say it doesn't.
The code above works fine if the sheet is activated, otherwise it fails with error 91 on the msgbox row.
Code through which I can extract the Name and father/Husband name from the following data in new Work Sheet in two column Name and Father/Husband Name
Cell A1 contain - Name : Ashok Kumar Father's Name : Raja Ram House No. : 1 Age : 60 Sex : Male
Cell A2 contain - Name : Renu Gerg Husband's Name : Ashok Kumar House No. : 1 Age : 55 Sex : Female
Cell A3 contain - Name : Mohd Yusuf Father's Name : Mohd Sabir House No. : 2 Age : 65 Sex : Male
Cell A4 contain - Name : Rani kishwar Sultana Husband's Name : Mohd Yusuf House No. : 2 Age : 52 Sex : Female
-
-
-
Cell A55000 contain - Name : Sudesh Father's Name : PC joshi House No. : 3 Age : 39 Sex : Female
This is just a screenshot of my huge data of over 60,000 rows. Owing to the restriction of HTML Maker, I am just showing in less than 30 rows in this screenshot.
I need to extract only the UNIQUE ROWS depending upon the column called "Unique Code" to another worksheet. A particular row or a record is repeated as many as 90 times in this database. I need to extract the whole row which is unique depending upon the column C which is "Unique Code".
I have tried the Advanced Filter option a couple of times but it does not seem to work. Also, the Auto Filter option is not versatile for such amount of data.
I recently cahve been working with a lot of webpages. Documenting the pages is quite loborious and inaccurate. I recently came across a utility that would explort all of the elements, their types etc and put it into a worksheet. For the life of me, I have not been able to find it. I was wondering if anybody knows of a utility like this, or how I could write a macro to parse this info.
View 2 Replies View RelatedI am trying to create a basic order history in excel from orders generated on our limited ERP system. I have exported the data required and imported to excel, but due to the export limitations, I can only export certain fields at a time.
This means that I have to create three sheets for all the data I require.
The first sheet has the bulk of the data and is now nicely collumned. However, I cannot get both the customer code and full customer name on the same sheet due to the aforementioned limitations.
Sheet 1 has customer code and other data, sheet 2 has customer code plus full customer name.
I have created a collumn for the customer name on sheet 1 (A3) next to the customer code (A2)
Basically, what I am trying to get it to do is as follows:
In "A3" I need to create a formula that states that if A2 contains a certain customer code, then look in sheet 2, match the code and place the full customer name for that code. Bearing in mind that we have over 395 customer codes in use, so asking for a specific code to lookup would be as time consuming as entering the codes manually.
I have a spreadsheet with company details in a worksheet. Each company details are in a new column. Like the following example:
company name
company name
company name
[Code]....
i basically need each of the bold heading in the first row of the new worksheet. Each company details will then need to be moved into a new row with the corresponding data under the correct heading column. Not all the companies have all the data for each heading it would be fine to have "none" value or blank in this case
I have a folder with an unlimited number of Excel Workbooks. Data within workbooks are in same format - 3 columns of data. I would like to extract the Data in the range (B55:B70) for every workbook, transpose the data and append by rows into one worksheet.
To be clear - I want to take data range B55:B70 from first workbook,transpose and put on first row - take data range from second workbook, transpose and put on second row, repeating for unlimited number of times...
I am trying to extract the data values from the references Bundesbank page and get them into a worksheet so I can manipulate from there. What I have is below.
Code:
Sub Get_Data()
Dim IE As New InternetExplorer
IE.Visible = False
[Code] .........
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
I am now trying to get the Index worksheet to extract data from the sheets that it has indexed, for example, it returns the sheet name, but i want it also to return the value that is contained in C2 and C3. Is this possible? I have attached the code which i am using below for ease of reference.
Private Sub Worksheet_Activate()
Dim wSheet As Worksheet
Dim l As Long
l = 1
With Me
.Columns(1).ClearContents
.Cells(1, 1) = "INDEX"
.Cells(1, 1).Name = "Index"
End With
For Each wSheet In Worksheets
If wSheet.Name <> Me.Name Then
l = l + 1
With wSheet
.Range("A1").Name = "Start" & wSheet.Index...................................