In column M I have data that lists a number, then number of metres between brackets. For instance
Column M
11 (79m)
1 (5m)
22 (123m)
Basically what I want to do is to always return the number of metres without m, so the data between "(" and "m".
I tried to do this using the find and mid formulas, but I either haven't got it quite right. I'm only after a spreadsheet solution (not VBA).
I would like to extract any numerals between the comma and colon. (Format is text)
Example: 8 Dec, 1:52PM (1 to show in another cell)
Format is always the same but date/day & hour may change. (Hence changing number of characters depending on day and time.)
Example: 11 Dec, 10:49AM (10 to show in another cell.)
Data in field A1 currently appears as below.
8/10
I want to extract everything to the right of the "/" in a new field.
The formula that I am using is =RIGHT(A1,FIND("/",A1)-1)
For some reason, I am only receiving a 0 in the new field and not the 10 that I expect.
What's odd is that the formula is working as intended on every other field except this one.
I have a column contains Postal Adress in more than 5000 rows. Column contains Door Number, Area, City and Zip code. I need to separate "Zip code" alone in next coulmn. Zip code (of India) will be in six digits like "600083" also some cases contain space in middle of zip code like "600 083" (after 3 digits). Is there any way to do this without doing cut & paste?
View 9 Replies View RelatedI have a column contains Telephone numbers with or without area code and country code for across the country (India). I need to extract the telephone numbers alone (neither area code nor country code). Telephone numbers will be 6 or 7 or 8 digits (not more than that). Is it possible to extract any set of numbers contain 6 or 7 or 8 digits continously? Some of the cases contains 2 contact numbers (2 set of 6 or 7 or 8 digit characters, between special characters will be there like slash, comma, space, hypen, etc.,
Here are some examples: ....
Column A in Excel has loads of numbers all in this format 971-417. I need to have each of those two numbers in a separate cell from each other(and without the hyphen of course).
Column A Needs to be: Column A Column B
971-417 971 417
In short, I'm looking for a quick way to put each number in its own cell for hundreds of rows. Are there formulas I can use to do this or does it have to be done slowly, one at a time, stripping the information from one cell to another?
i have a list of information, and from that i want to extract a certain piece from that information and out it in a new cell...
eg. 'KLM00506', 'KLM00409-10', 'KLM00821-9' etc
as you can see, the info is not in the same length
what i need is to take out the FIRST 6 characters and have the remaining to be in a new cell
anyone has an excel formula that i can use ? not really interested in code, cause in this particular worksheet, everything is at its' place, no code required
This is very similar to my previous post, which was solved. Now that I've extract the numbers, I need to extract the text for the specific work activities, for example 13Z or 9GGG. I'm assuming some variation on this formula:
=LOOKUP(9.99E+307,--MID(C4,MIN(FIND({1,2,3,4,5,6,7,8,9,0},C4&1234567890)),ROW(INDIRECT("1:"&LEN(C4)))))
is the solution, but I'm struggling with making the correct alterations.
I need a Excel 2007 formula that will extract a string of text that is seperated by characters.
Example:
in Cell (A1) I have the following
ALA 11 : [ MOBILE ] 36619 1/2 ... HOME ... JUNE 2009 / TODAY: $ 50000
End Result wanted:
Cell (A2) 11
Cell (A3) MOBILE
Cell (A4) 36619 1/2
Cell (A5) HOME
Cell (A6) JUNE 2009
Cell (A7) 50000
I have a problem that I just dont seem to have the brain power to solve right now. I have a list of websites and I need to extract all characters after the last / in the URL. URL example:.....
I have been using the find function in conjunction with LEN and RIGHT etc but the multiple instances of / is causing headaches for me. Also, the trailing string of characters that I want to extract can be both text or numeric and are of differing lenths.
I am trying to write a function that finds and breaks a cell about the first space.
Worksheet is:
=LEFT(name,FIND(" ",name)-1)
Have tried...
Function Firstname(name)
Dim Space As Integer
Set Space = .Find(" ", name)
Firstname = Left(name, Space)
End Function
and also...
Function Firstname(name)
firstname = left(name,find(" ",name)-1))
End Function
I am attempting to utilize the Mid, Left, and Right functions to parse out data returned in a single cell. There are twelve months of data returned with the "title" listed after. I would like to be able to FIND the title and return a specific number of characters of data to the LEFT not the right (as Mid seems to do).
EX.
Cell A1{ 1 2 4 5 3 5 TITLE1 1 2 3 6 7 4 5 TITLE2 3 4 5 2 4 5 TITLE 4 }
Cell A2{ 1 2 4 5 3 5 TITLE2 1 2 3 6 7 4 5 TITLE3 3 4 5 2 4 5 TITLE 4 }
I would like to be able to search each cell for the "TitleX" then parse data out to the left of that title (and if not found, return "").
There are too many different Titles to use IF statements and I cannot change that the data comes to the left of the title.
I have a list of numbers in which I need to return the last 5 digits; the length of the string may vary.
However, if the last two digits of the number ends in a specific value then it should skip over the last two numbers and return the preceding 5 digits.
I have tried and have used the very basic Left, Right and Mid functions. My problem is I dont know how to code the formula to identify the last two digits and skip over them, if necessary.
I have provided an attached example.
Extract numeric value based upon ending characters.xlsm
Say I have a string "09800EBHR052708"
How would I take the first 5 characters and get a number out of them?
I have the following in Column A
28VNC
JR2KL
29C9O
PQS11
I'd like have this result
28
2
299
11
How would I achieve this.
How can I extract mid section of the string which is always 5 characters long and is always followed by a period "." ?
My account strings are in 3 sections (but the third section isn't always used)
For example,
1.10210
1.22556.001
900101.56201
955261.54444.001
5566625.58886.957756
I'm working with a large list of items of varying length. A sample worksheet is attached. I need to do the following:
1) If the characters after the final forward slash from the right are of the pattern "tttxxx" (where "t" is text and "x" is a number/digit), then return all characters to the right of the final slash, including the slash itself:
Y:/Series/hun/hun109 ----> /hun109
2) if the characters after the final slash from the right are not of the pattern "tttxxx", then return all characters after the second slash from the right, including the slash:
Z:/Series/crd/crd409/editorial ----> /crd409/editorial
3) if there are less than 3 backslashes in the item, return a blank.
Having trouble with this one. Searches seem to bring up every other variation of extracting info from strings except this.
I have cells which contain alphanumeric strings as below and, using a formula, I want to extract everything from and including the last letter to give A 2-3, B 3 and C 3-4 in the examples below.
Sub-base A 2-3
Sub-base B 3
Paving C 3-4
I can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View RelatedCell R2 contains this value: " Forecast Time: 240 Index A forecast = 9078.314". I want to extract the characters "9078.314" and put them in a different cell. The cell that it should be affected to depends on the characters "240". I believe I should use the MID() and VLOOKUP() functions but I get stuck at the very first step of extracting my data.
View 3 Replies View RelatedI have the following type of info in A1,A2,A3...
Code:
nameGaryage40cityPittsburgheight190
age30height150
ameLindacityMichigan
citySan Jose
ameHarryheight180age50
My goal is to get as close as possible to this,so it will be easier to sort and manage
Code:
nameGaryage40cityPittsburgheight190
nameLindaage30cityMichiganheight150
nameHarryage50citySan Joseheight180
I can't use the "" sign as delimiter to separate them into different columns because the age,city,name and height fields are in random positions on different cells.The good thing is person's name will always come after "name" string, age is alwals followed by "age" string, so it cannot be like nameheight40Michigan180
I think the following would be the easiest method(not for me tho).If on B1 I had a formula that said "find the string "name" and write anything after it until you reach the next "" character".On C1 field I could have a formula "find the string "age" and write anything after it until you reach the next "" character.On D1 I would have the same for "height" string,then on E1 for city string.
My question is somewhat similar to this one
Extract A String Between Two Characters
Formula which outputs the data between 3rd and 4th instances of the "_" character.Can we substitute "3rd and 4th" with a specific strings like "age" or "height" ?
Code:
=TRIM(LEFT(SUBSTITUTE(MID(A1,FIND("|",SUBSTITUTE(A1,"_","|",3))+1,LEN(A1)),"_",REPT(" ",LEN(A1))),LEN(A1)))
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
So I have this problem in excel with comparing 2 columns.
Basically, I have 2 columns(a &B) that I need to compare with one another and find out the matching data. I am trying to use that matching data to enter in our reports.
Both columns might have duplicate items because I am dealing with premium numbers.
Formula to compare these 2 columns and find the matching data and extract it to a separate column. Keep in mind, i am dealing with almost 20,000 lines of data.
Currently I've been able to remove the prefixes and suffixes using the replace option as those were consistent across the data set, I'm now left with a series of numbers that look like this:
11.225D2
11.24c1
11.28.r1
11.31.1.2h1
11.36.g1
11.39 A2
11.39B1
11.3c1
In most cases I need to remove the information after the last period. Some of the data has a space at the end, instead of a period and then some have no space or period but have the letter that needs to be dropped. I'm using xl 2011 for MAC.
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
I am trying to extract unique Data from the information in the output data in the file attached after i have extracted data based on criteria from the database sheet. i have noticed that because i extract data from the database sheet and from there i perform the extraction of the of the unique data , it is not able to extract unique isser name form the output sheet.
View 1 Replies View RelatedI have a workbook that has ben imported into excel and I need to extract the Cabinet sizes (red text) from ColumnC On Sheet2 leaving out the rest of the info. I have a button on the home sheet that has the code that I am running to generate this report it will do most of what I want but I am stuck at extracting the cabinet sizes.
The data is coming from the SheetComponetListing worksheet and going to Sheet2. I have manually created the end result that I am looking for on the CabinetSize worksheet. [URL]....
I have a list for the user to enter in creditor name, balance, monthly payment and interest rate. In the credior name portion, I have used a Data Validation List (drop down menu of bank names) for the user to choose from.
Later on... The user types in the customers ACTUAL bank acount that they will be making payments from.
If the user types in a bank that is the same as one from the drop down list earlier on, I would like a dialog box to come up with further instructions.
I have the data string below:
Career:25: 1-0-2 $13,765
I would like to extract the 1 between the : and - and as a seperate extraction would like te 2 between the - and the $ I have tried a few things but end up with the - as the length of the data changes
