I have a source sheet with numbers in column A, D and M. These are strictly numerical and show to be Number. I used Vlookup in another sheet to input these numbers. The column with the Vlookup is also formatted as Number. I then copied the Vlookup results and pasted as Values. Then I used Mode to find the most common number. In most cases it works, however, some cells are coming up #N/A. In the columns that were pasted as values, if I press the F2 key, then enter, the Mode formula then works.
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I have 25 cells, that can either have a value of 0 or o.2 The cells have to be added up. No problem there ofcourse. But if a cell has a value of 0, -0.25 should be subtracted from the total.
I have this formula, but I'm not sure how to use it for multiple cells:
If cell D3 has the text string "RQS" and cell D2 is colored green, I want to count as one. The formula needs to apply to a range of cells. The end result being I want to know how many green cells are delineated at RQS.
I'm currently working on a test matrix that has high level and mid level test cases. The High level results cell is tracking all mid level test cases below it. If all mid level test cases are displayed as "Pass" then the High level test cases displays "PASS". If any of the mid level test cases is not displayed as "PASS" then the High level test case result is displayed as "FAIL" However, "PASS" and "FAIL" do not accurately represent the status of the test cases in the instance of them not being filled out. Mid Level test cases start off in the "Select Result" state which basically says it that test has not been performed. I would like to have a third value displayed as "NOT COMPLETED" or "IN PROGRESS". Below is the current formula that I am using.
On thing to keep in mind that may or may not make a difference is that one of the High level test cases has 30 mid level test cases and from my understanding, IF / AND function only allows up to 30 logic inputs (not sure if that is the correct terminology or correct at all).
in the lookup function listed below, it only produces a result for the first exact macth. well, what if the data i am searching on could result in multiple results? i would like advise on how to modify this formula to bring back the 2nd, 3rd, 4th, etc instance of a match in the lookup array.
the original formula , i found on this site, allows you to combine multiple cells to create a unique reference, and then search in another table containing columns of those combined cells, and results in the intersection of a row and column and that is the data you want returned .... kind of like a hlookup, but you can use one or more cells to create the unique lookup, and bring back whatever column you want (where as a hlookup is limited to searching the left most column and bring back a column to the left)
here is the formula:
{=INDEX(data to retrieve,MATCH(cell1&cell2,table to find cell1 in&table to find cell2 in,0))}
"data to retrieve" is an array of one column containing the data you want to retrieve "cell1&cell2" is a combination of cells to make the unique lookup (this could just be one cell if you wanted) "table to find cell1 in&table to find cell2 in" is a table array to look in to find the look up value
I have a formula that uses the MATCH function in a column of cells. My "lookup array" value for this MATCH function is A11:A411. I paste my data set into column A and if my data set is smaller than 200 (i.e. less than half the size of the lookup array size) then THE MATCH FUNCTION DOESN'T WORK. Weird.
1. Is there a way to make MATCH work all the time, no matter what the size of my data set?
2. One solution would be to have my "lookup array" be variable. Is there a way that I could change A11:A411 to A11:A"row of last value in data set"? OR to say it another way, is there syntax to describe a range with variables as the row numbers?
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D. So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
Supposing you would like to find the median of numbers in column D, but only for rows that have the word "Jones" in column A? Is there a way to do this? Obviously I know I could do a sort and simply specify the range myself, but we're dealing with nearly 2000 rows and a LOT of different values in column A
It occurs to me that it would be even better if I could ask excel, in effect, to identify every separate text string in column a and then find the median of the corresponding numbers in column D. In other words I wouldn't have to type any strings from column A at all.
I want to find a content of ActiveCell only in column "C", beginning from cell C4.What must be in Look in, and Look at?How to accomplish to match whole number,ex. "1" in cell with "1",no to find "1" in "123"
This function searches in whole sheet,but i need only in C column! Cells.Find(What:=ActiveCell, After:=[c4], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _ , SearchFormat:=False).Activate
I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.
I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.
I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?
In plain English, I'm looking for something like
If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")
I have certain cells in my spreadsheet that contain formulas linking them with other sheets within my workbook. I have grouped sets of rows in my first 2 sheets (to show just headings and to expand to subheadings & details). When I try protect the cells with formulas on the sheet then it blocks me from expanding or contracting the row groups.
Is there an easier way to stop someone editing or deleting the data in my cells? There are about 2 dozen cells with formulas in my first sheet that need protecting - unfortunately not in any particular order...
I am trying to write a formula that will look at an array (containing text strings) and then for each occurrence of a particular value return the text string from another cell in another column but which matches the row of the occurring value. I would prefer all returned values to be entered into different cells in a column but I would be happy if they were all in one cell separated by a comma or whatever.
On sheet 1 I have a list of 1000 firstnames On sheet 2 I have a list of 1000 emails,
I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of values from a 10 x 10 grid that does not have values in every cell.
(I would also like to eliminate any blank cells from the final column.)
I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
I am trying to use the ARRAY.JOIN function as recommended by Domenic in previous posts. I need to output a single column of all the values from a 10 x 10 array that does not have values in every cell. (I would also like to eliminate any blank cells from the final column.) I can only get ARRAY.JOIN to output the first value of whatever range I select, not a column of values.
how to properly execute that function. One earlier comment was that I was not specifying criteria. I'm not sure from the description and help section of "morefunc" as to what those criteria specs are, other than specifying the whole array. I am attaching a test file with the 10x10 grid & some missing values in A1:J10. Cell L1 has the ARRAY.JOIN function with the entire grid specified, but the output is only the first cell of the grid.
I need to have a single combobox pull values from a very large term list (>40,000), and place selections in a single column in sequential cells (eg, B1, B2, B3, etc..). With the following code (credit to Ingolf and MickG) I am able to get the list to popluate cells in a column. However, I cannot seem to find the proper attributes to control the auto selection of items in list. I do want the autocomplete feature so the user can quickly navigate this huge list, but as soon as i start typing, it starts populating terms into the growing list. I would like to have the user actually select the item.
Private Sub Worksheet_Activate() Dim Rng As Range With Sheets("Listing")
I am working on a task analysis involving functions performed by different operators, each function marked by an "X" and totaled at the bottom of each operator column. I have seven sheets, named "Main Engine, Propulsion System, APU and ELEC.", etc. Columns B-F on each sheet are headed "C/M, Engr, Nav, LM, DE" respectively.
I need to add/total the bottom figure in each column (total of number of X's for each column) on a separate, final worksheet. Each of the worksheets contains a different number of functions, therefore the total of X's in each column is listed in a different cell# on each worksheet.
So this is my dilemma as the thread title states: I need to be able to sum/total the amount form different cell numbers (same column) across different worksheets into a cell in a separate, final worksheet.
I have figured out how to do this if the numbers are in the same cell across worksheets, but not varying cells by column.
What i'm trying to do is i would like to compile in 1 column all duplicate values from multiple cells.
ex. A1 to 10 is numbered 1 to 10 respectively, B1 to B10 is numbered 6 to 15 respectively. which means in A1:B10 the duplicate values are 6,7,8,9,10. i could like these number to show automatically in C1 to C5.
I have a large worksheet that lists employees and the hours they work each day in a pay period.
For Example:
Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.
Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."
I'll check this frequently if clarification is needed.
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".
So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.
I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.
