File Name With Variables
May 8, 2009
I'm getting an error here. Yr and State are variables defined by an inputbox. Is this not the proper way to write out a filename with variables in the mix?
Data Source= "P:Current Quarter" & Yr & "Files" & State & Yr & ".mdb"
View 9 Replies
ADVERTISEMENT
Mar 16, 2009
I'm trying to Hyperlink my documents to a folder and file name specified by different cells in my workbook
Or essentially, I'm trying to go from this...
View 14 Replies
View Related
Mar 21, 2007
I've been trying to use combo boxes to open, then copy and paste information from specific worksheets the user requests. So far, my approach has been unsuccessful --and the suggestion to simply use the GetOpenFiles procedure was helpful but failed to address more than the "open files" part of my application. Can variables be part of an excel file address as I've tried to use them in the "strFile =" statement immediately below?
Public strFile As String
Public strSheet As String
Public strSheetName As String
strFile = "D:Documents and SettingsmccaralDesktopMP2 MONTHLY FINANCIALS_
15_FINANCIALS" _ & strSubtask + "-" + strSubelement + "2007" + strMonth + ".xls"
strSheet = "Task Order" & strSubtask & "-" & strSubelement
strSheetName = strSubtask & "-" & strSubelement
Workbooks.Open Filename:=strFile
Sheets(strSheet).Select Range("A1:P15").Select
Selection.Copy...................................
View 2 Replies
View Related
Jan 18, 2008
I'm trying to use vba open a new workbook and then edit it. But i can not select cell in the new workbook. but it can be activated!
it can open the file (fname) and activate the sheets (sName), but will flage an error on range select.
Workbooks.Open fileName:=fPath & "" & fName
Workbooks(fName).Sheets(sName).Activate
Range("A8").Select
View 9 Replies
View Related
Feb 5, 2009
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
View 2 Replies
View Related
Jul 27, 2006
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
View 2 Replies
View Related
Apr 27, 2006
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
View 3 Replies
View Related
Jan 16, 2007
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
View 3 Replies
View Related
Oct 10, 2011
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies
View Related
Dec 18, 2012
I have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
View 1 Replies
View Related
Apr 9, 2014
I'm having a hard time understanding how to accomplish what seems to be a simple result.
I need to display one of two words, based on whether or not a pair of values are above or below the criteria.
FIRST:
IF H6 is greater than 5000
AND
IF AB6 is greater than 25000
Display: Double
SECOND:
IF H6 is less than 5000
AND
IF AB6 is greater than 25000
Display: Single
There is no 3rd scenario, even though logically there should be.
View 13 Replies
View Related
Apr 1, 2008
I am trying to put variables in this URL which is related to yahoo finance :
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
I defined at the beginning
Dim start_date As Date
Dim end_date As Date
Dim datestring As Variant
start_date = #1/31/2001#
end_date = #11/26/2006#
and put them in datestring
I passed the datestring to a new sub which has the URL:
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
So, my question is, i tried to put the (1/31/2001) and (26/11/2007) which is in the above URL which is separated in variables and the URL remain the same
View 11 Replies
View Related
Jul 6, 2012
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
View 9 Replies
View Related
Jun 26, 2014
vlookup with 3 different variables, for example cells k4 k5 and k6 can be changed to give different variables. Is it possible to have a vlookup function in cell k9 which returns the correct % when the 3 variables are chosen. example, blue boat 48 would return %value of 21%
View 2 Replies
View Related
Aug 1, 2014
I am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
View 1 Replies
View Related
Feb 19, 2008
I am trying to add an additional criteria to the following sumproduct formula. The formula below works fine to add up values that are within a date range. However, I want to add values within a specified date range as well as one additional variable. The additional variable is in column G.
SUMPRODUCT(--($A$3:$A$1015>=$A1026),--($A$3:$A$1015<=$B1026),D$3:D$1015)
View 10 Replies
View Related
Nov 30, 2008
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies
View Related
Jan 20, 2009
I want to make an excel funktion than can distinguish between 3 variables. The three variables are the outcomes of my first function which are 0, 1 and 2 these IF functions can be seen below:
=IF(B11>52;"1";"0")
=IF(B12>5;"1";"0")
Then when I have these results I have tried the following function:
=IF(C11+C12=2;"6-12";"4-6")
By using this function I get an output for 2 (true) and 0 (false), but I would also like an output for 1 (which would be 6 in my work)
It looks like this:
Var 1 58 1
Var 2 4 0
Suggestion 4-6
So in the above case where the sum of var1 and var2 is 1 it is only counted as false for not being 2 and therefore = 4-6 instead of what I would like it to be = 6 (for 1)
View 13 Replies
View Related
Apr 14, 2009
I'm trying to count cells in one column that match a variable only if it also matches a variable in another column. For example, I want to count all of the cells in column A that match "Franklin" only if column D shows "True".
View 5 Replies
View Related
Apr 21, 2009
Say I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
View 7 Replies
View Related
Feb 5, 2010
Can I put two variables into a SumIF? forexample I want to sum Column C if Column A is equal to Apples and Column B is equal to Oranges, then sum Column C. Is there a quick formula?
View 3 Replies
View Related
Feb 18, 2010
I am having real trouble with a formula.
I have used a similar formula for to calculate a column.
Can any one see where I am going wrong. It is the cell highlighted in yellow on the attached spreadsheet.
View 14 Replies
View Related
Feb 14, 2013
I'm having trouble with my logic again :/
AREA
Tp std
Tp
30
5
So I want the Tp in the 3rd column to show the result:
IF AREA is less than or equal to 20, Tp=Tp std / 2
IF AREA is between 20 and 40, Tp=(((AREA-20)/(40-20))*(Tp std/2))+(Tp std/2)
IF AREA is 40 or greater Tp = Tp std
But as one equation
I have just been struggling with the range part.
View 2 Replies
View Related
May 15, 2009
I am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
View 7 Replies
View Related
Aug 23, 2009
I used a macro to get the following code, but would like to do this with VBA code where I use variables and numbers instead of the
macro's ("I568:J568") notation. Thus I would have something like (lRow, 9) : (lRow, 10) or whatever the correct notation is. Basically I'm trying to copy and paste formulas from one row to the next.
View 4 Replies
View Related
Sep 3, 2009
Is there a way to change variables while the code is running?
View 11 Replies
View Related
Sep 17, 2009
I know that we should declare all variables at the beginning of a subroutine, in fact I'm told it's good practice to use Option explicit to 'force' variables to be declared, my question is why?
If I don't declare a variable the routine still seems to work OK so what is the downside of not declaring them upfront? Is it just for neatness or common practice or is there another reason?
View 2 Replies
View Related
Nov 14, 2009
I want to schedule a report to run overnight when I'm not at work, and it needs to save as a filename with the previous day included in it
For example, the filename needs to be saved as
C:Test_variable_ver1.xls where variable is equal to day(today()-1) in excel terms.
View 3 Replies
View Related
Oct 8, 2008
I have to count a specific column based on two criterias...
Column B Column C
SCD Y
ECD Y
DCD N
SCD N
SCD N
I have tried =COUNT(IF(AND(B3:B51="SCD",C3:C51="Y"),1,0)) But that doesn't seem to give me anything but a "0".
View 6 Replies
View Related
Sep 29, 2011
I want to have formula with: ActiveCell:formula = I want to sum columns in a row having a column variable called: col The col variable will be the far right column and the other colunm in Row 2 will be col-3. What is the syntax to create this formula? If col = 5, formula normally would be :sum(b2:c5), I want to use col as the varialbe.
View 3 Replies
View Related