I have data like Data have
entryxy
112
2
3
445
5
6
789
8
91013
10
for example i want to fill the 2nd row with data from first row, same way 5th row also with data from 4th row like 7 and 10. I am expecting my data table should have like this finally Expected
entryxy
112
212
3
445
545
6
789
889
91013
101013
Attached file : row fill.xlsx
I am using a Pivot Table to sort, combine, and sum data. After this is complete I want to copy the pivot table and paste it (values only) to another worksheet and use the data again. The problem is the pivot table does not fill in all the blanks and leaves empty rows. The there a way to force the pivot table to fill in the labels?
View 6 Replies View RelatedI am looking for advice on how to move cells containing data (columns D to K in EXAMPLE A), upwards so that the information lines up with data already existing in columns A to C (to be included as part of an overall VBA routine).
In the upper example data in cell D2 needs to move upto D1, E3 to E1, F4 to F1, G7 to G1 etc and K9 to K1. Now, data on following rows is to move upto row 2 eg: E5 to E2, F6 to F2, G8 to G2.
The first 'block' of data starts at row 1 and finishes in this case at row 9.
The next 'block' of data starts at row 10 and finishes at row 18.
Row 19 shown is the start of the next 'block'. These 'blocks' may have upto 20 rows ....
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies View RelatedI would like to fill the empty rows with value from the row before them that has a value.
row 1 has a value "a"
and row 2-5 has no values
row 6 has "b"
then row 7 has no value etc...
i would like help getting row 2-5 filled with a, and row 7 filled with b and any subsequent rows that may have a value
I have a sheet with several thousasnd lines that has empty cells between the account number and account name. I need to fill those cells with the account number and account name so that it can be used in a pivot.
View 2 Replies View RelatedI need VBA code to fill a column with a color. I need it to stop when there's no more data. instead of filling column to the end of the entire page. and each sheet i open will have different amount of rows.
View 9 Replies View RelatedI have been helping a friend keep track of his clients, by making a form for them to fill out when they become a client of his (he owns a care rental) and I made a spread sheet for him to keep track of which cars are out when...
With that said, I would really like to have a Macro that i could run, when the form with all the personal information about hte client had been filled out - take that information and pull it over into another spead sheet that keeps track of all clients.
Meaning that workbook 1 is set up as a booking form and workbook two is just a normal list. I can make a macro that pulls over the infomation - but the problem is that it will always pull the information into row 1. Meaning that it overwrites itself each time I run it. I would like the Macro to know that it has to fill the information into the next empty row.
I am looking for code that fills empty cells found in columns A-F by copying and pasting the value from the cell of the previous row (of the same column) ignoring columns G onwards. The copying/ pasting then should stop when it encounters its first completely blank row.
View 2 Replies View RelatedI would like to enter N/A in the empty cells E6:E33 with the click of a button. Not sure how to write the code.
View 5 Replies View RelatedI have a spreadsheet that has a bunch of empty cells that I need to fill in. Someone else needs to know which ones I have filled in after I am done. Is there a way that I can have Excel automatically highlight the cell after I put something in?
I know I could highlight the cell manually after I put something in it but if Excel can do this automatically for me, that would be the best as this is a very large spreadsheet and there will be many blanks to fill in. I am using Excel 2003.
Is there an easy way that if any cell in column A is blank it can copy the value from the closest non-blank cell above it? I eventually have to export data from a workbook into a database. But I cannot have any cells in column A as null or blank.
1. There are no blank rows, and at least 1 cell in each row has a value.
2. The person who constructed the sheet did not fill in all cells in column A for each row, they imply that if the cell is blank then it belongs to the same value as whatever the cell above it has. Ie, all similar rows are grouped together.
3. Of course, I only need column A filled in for rows that have data in at least 1 of their columns.
4. Simple worksheets with no formulas to worry about.
Additionally, if it is possible to get a macro so I can apply the code to all worksheets in my workbook at once, can I get that too? In the example below (where .... are blanks) I would like A2 to read 'Fruit' and A4 to read 'Meat'
ColA ColB Colc
---- ----- -------
Fruit apple red
.... grape green
Meat ham pink
.... beef brown
I'm trying to write a sub function that when called will search left to right, top to bottom for the first empty cell in a 4x4 grid and insert a timestamp.
I've generated a large bulky bunch of code that seems to do the trick but I'm not terribly happy with it...
I require a VBA code to fill Zero for empty cell in seceleted Range. Range will be select by Mouse.
I try following Code.
But It will not sucessed.
HTML Code:
Sub Zero()
Dim ws As Worksheet
Dim Specifiedrange As Range
Dim Rng As Range
[Code]....
I'm trying to write a macro for extreme value analysis. I need a macro which will do a number of things! the attachment should explain it.
View 2 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I have a situation where I am trying to copy to blank cells. All the data is in Column A. In Column A there are Account numbers that are attached to dates in Column B and Transaction Amounts in Columns C & D.
If there are multiple dates with transactions, then Column A does not repeat, but is blank until the next Account number. I am trying to have the Account number fill in the blank cells until the next Account number. I have a macro that runs and picks up the Account number and then copies the data in Columns B - D. However, the blank cells are messing up the macro.
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View Relatedformula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
View 2 Replies View RelatedHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
vba macro, I've a s/s where column "W" is named "Proceeds" column and i would like to sum empty cell with above data. see below raw data:
Proceeds
-23,900.00
-18,100.00
198,000.00
198,000.00
-326,250.00
-326,250.00
Now i would like to sum empty cell & colour background with yellow and borders with top and thick bottom border.
