florida golf found 4 time(s) in 21 Title words (Density: 38.10%) florida golf found 7 time(s) in 25 Meta Description words (Density: 56.00%) florida golf found 8 time(s) in 49 Meta Keywords words (Density: 32.65%) florida golf found 2 time(s) in 18 Heading(s) words (Density: 22.22%) florida golf found 18 time(s) in 191 Alt tag(s) words (Density: 18.85%) florida golf found 14 time(s) in 470 Linktext words (Density: 5.96%) florida golf found 5 time(s) in 210 Bold text words (Density: 4.76%)
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C Wells 123 Wells 123 Wells 1234 Wells 1234 Wells Fargo 123 Wells Fargo 123 Wells Fargo 1234 Wells Fargo 1234 Wells Fargo Inc 123 Wells Fargo Inc 123 Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
The 'Text to Column' function does not work because there is no fixed width and no deliminater. To add in a deliminater, like a "", is an option but there are thousands of cells to do this to.
As you can see, using LEFT, RIGHT and MID functions become tricky since the deliminater would be a "space" but there are often several "spaces" in the string of characters.
Is there a way to SEARCH or FIND the first number and let that be the deliminater?
I have text in column F that have numbers at the begining of the text. Unfortunately not all the number are of the same lenght. what is the way I can separate them from the text.
example:
87VADTREVINO GROUP79403HEITKAMP SWIFT7O554HEITKAMP SWIFT
I know I can use text to columns to do this. I have horse results listed in column A as follows 3.5L (i.e. 3.5 lengths), 4L and so on. Every number ends with an L. I want a formula in column O that just gives me the number as below:
I want to separate the text and numbers into two different cells. Basically, I have the entire drawing details in one cell and I need to split it up, e.g. I have:
Is there a way to separate text from numbers, (other than text to columns) My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
I am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE 10.00
56.00 ELECTRONIC/ACH DEBIT 56.00
199.00 ELECTRONIC/ACH DEBIT 199.00
2,017.64 ELECTRONIC/ACH DEBIT 2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
I have some data that is both text and numbers in the same cell. I would like to split the the data so that the text is in one column and the numbers are in another column.
The numbers are all a fixed length (15 chars) so I know that I can use the following formula = RIGHT(A1,15)
However I am not quite sure how to split the text as the length can vary as as well as the number of words in the string.
For example A1 is 1 word with 7 characters but A2 is 2 words, 14 characters long inc space.
I need to separate these lines into columns such that, for example, the first line would be in 6 columns: (Jackson, TN) (9623) (BCBS TN) (98) (UnitedHlthCare) (2)
The delimiter does not work because some of there is no one character that always separates the text and the numbers. I've tried going through in word and typing something like '%' where I want to separate, but with thousands of lines of data that is extremely tedious.
Is there any formula I can use that would be capable of solving this?
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this: DCM1005-1 DCM1005-10 DCM1005A MTR1005-1 MTR1005-10 MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas) A1, B1, C1, D1 DCM1005-1, DCM, 1005, 1 DCM1005-10, DCM, 1005, 10 DCM1005A, DCM, 1005, A MTR1005-1, MTR, 1005, 1 MTR1005-10, MTR, 1005, 10 MTR1005A, MTR, 1005, A
I've got an excel worksheet that contains a list of buildings and their associated control valves for water supply (subset of table attached).
I'd like the user to be able to search by building name to display its associated valves and control information. I realize I could use the list function on the worksheet, but would prefer to set it up as front page to the workbook where data is displayed in a nicer format.
I guess my question is if there any way I can set up another worksheet with a drop down box that allows the user to select a building or type in the building name and have its corresponding data display?
I'm using a fairly large spreadsheet to put all the cost and benefits of a large area development phased over different years and then calculate the NPV of the total project. The costs/benefits are on separate sheets and are divided into categories with headers. Every category has a summation row as last row.
Because the project is divided into subprojects I created a column which has a dropdown box (using the Validate function) in which I can attribute that cost/benefit to a certain subproject. Using IF functions and another dropdownbox on my Overview page I can get a insight in the total cost and benefits of the subproject I select in the dropdown box.
So far so good of course, but what I really want is not only to be able to get the Overview page per subproject, but also the Cost and Benefits pages. I was thinking about putting a filter on the column which has the dropdown boxes with the subproject number in them, but when I select a number I want all the headers and "summation rows" of all the categories to freeze/stay in sight, because otherwise the output of the filter is useless (for printing and evaluating) ...
I have a report that works fine, but I'm trying to simplify its usage. My challenge is that I want to show the filter options from the "SCORE Data" sheet (in cells B2 and C2) on the "SCORE Output" sheet. I attached a sample spreadsheet with explanations, for illustration.
I have an address with numbers. Sometimes has only address number and sometimes the appartment also. I want to separate those numbers in two different columns.
I was able to create a macro to sort two columns in ascending order and then calculating their difference in the 3rd column via a macro, which work only when all the numbers were matching. if there's a mismatch then i had to separate them manually.
I am pretty much new to Macros and was thinking how do i make a macro which would compare the two columns and move the ones to the bottom which do not match?
I have a list of over 15,000 alphanumeric figures (column A) that I need to parse out as follows (columns B-E) separating letters from numbers in sequence:
I have a list of user names and UIDs, all in one column. I'd like to split the numbers into a separate column. How can I do this? Here's an example:
A'Aross Hd 798027047
A'Yolanda Gallegos 100004367799914
Aaiky Sweet 100000984883871
Aarchie Alin 100000295447271
Aasusana Azanza 100000086329219
Ab Raf 100000223369007
Abigail Cadenas 100003769100097
Abigail Gopaul 100002988007633
Abod Rezk 100002010187332
Btw, I'm an Excel newb and don't know a lot. I did try Data/Text to Columns with a delimiter of spaces, but there's really no rhythm with the spaces so it splits it all whacky.
I have two worksheets and each one has it's own number. Sheet1 has "100" and Sheet2 has "101" and they're located in "A4" on each. Each sheet will have a control button that will be pressed when a sheet is complete. The control button will clear a range of cells "B5:C20" and increase the sheet number in "A4". So if you press the control button on Sheet1 the range will be cleared and the number will change to "102" since Sheet2 is already using "101".
I've found several posts but none seem to peform this varying function:
EX12345678....Result in Col B: "EX" and Result in Col C: "12345678" RTZZ4567.......Result in Col B: "RTZZ" and Result in Col C: "4567"
The problem with the formulas I've got specifically define - pulling let's say LEFT, 2 characters.....when, I may need it to pull 2 or 3 or 4. I found something that's smart enough to look for ONLY ALPHA and strip those out and place them into one column. =LEFT(A1,MIN( FIND({0,1,2,3,4,5,6,7,8,9},A1&"0123456789"))-1)
* I need something that's smart enough to look for ONLY NUMERIC. no matter how long the string is...and place those in Column C (like I mention in the example at the top).
