I have a simple excel sheet and two of the columns show a Due Date and a Received Date. All I want to do is highlight any cell in the Received Date column where the Received Date is greater than the Due Date. The spreadsheet shows Purchase Orders and shows when they were due to be received and when they actually were received. i'd like to be able to show all orders that were received past their due date.
If I give excel the advanced filter criteria <=2/15/2008 it seems to list all the dates prior to and on that date. Are there any pitfalls to this filtering technique (i.e. would any dates fall through the cracks)?
View 2 Replies View RelatedI have a three columns of data in A,B,& C.
In column A a From Date
In column B a To Date
In column C a 6 digit number
I would like some code to achieve the following in this order:
1) Find any duplicates of the 6 digit number in column C and then place them on the same row as the first.
I.E if the following three matches are somewhere in columns A, B and C:
A B C
08/07/2007 22/12/2007 731655
22/12/2007 29/12/2007 731655
29/12/2007 05/07/2008 731655
I want them to place on the same line in date order like:
08/07/2007 22/12/2007 731655 22/12/200729/12/2007 731655 29/12/2007 05/07/2008 731655 (this line would be on the line above)
2)After all the above has been done I would like the code to go through and looking for matches of dates between column B and A
For example if I had the below two dates somewhere in the list:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
I would want the bottom one to be moved to the same line as the top like:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
If there are more than one match like below:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
I would like the following:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
3) AFter this was completed I would like to look for date matches one day apart for example:
A B C
08/07/2007 04/08/2007 759955
05/08/2007 01/09/2007 759293
And then place the bottom set of date along side the top like:
A B C D E F
08/07/2007 04/08/2007 759955 05/08/2007 01/09/2007 759293
[Code] ....
In column F I have a list of dates (dd/mm/yyyy).
I can manually filter dates ok, but want to set it to part of code to use automation for a report.
The code when run, finds nothing, where it should. I tried using [CDate] also but also same result.
How can I use a pivot table or advanced filter or macros to view rows by
Only today’s date (1 row) ?Only this week ?Only last week ?Only last month ?Only last 12 months ?All dates ? That is, rows are headed by day. I select the rows that I view.
I'm trying to filter a list between two dates that are selected using drop down lists in Cells CZ1 and CZ2.
The first part of the code works ok ie it filters the list by column 28 as "Shipped" only.
The second part is causing me trouble.
The third part sorts the list by date order based on column 48 and this also works ok.
Code:
Sub FilterTransactionDates()
With Sheet1
.AutoFilterMode = False
.Range("A1:CU1").AutoFilter
.Range("A1:CU1").AutoFilter Field:=28, Criteria1:="Shipped"
.Range("A1:CU1").AutoFilter Field:=48, Criteria1:>=Range("CZ1").Value, Operator:= _
xlAnd, Criteria2:
I am using Excel 2010, and trying to count the number of times a certain name occurs within a specified date period. The date range start date is manually entered in F7, and the date range end date is manually entered in F8. I need to be able to choose different reporting periods. The answer to this question goes into F3.
I also want to know how many working days (Column D) it takes per name. A working day is Monday-Friday, less public holidays. In this period there have been public holidays from 24 December until 2 January (inclusive), 20 January, 6 February, 18 April, 21 April, and 25 April. I put these dates manually into the worksheet "Holidays".
For the number of times a certain name occurs I tried the COUNTIFS function but keep getting a "zero" value. I used the NETWORKINGDAYS function for the working days and have incorporated the holiday periods. That seems to work OK and I can live with the negative date values showing here.
The really tricky part for me - can I combine the COUNTIFS (assuming it works) and NETWORKINGDAYS functions into a single function to only count the working days of a specific name. As some names have yet to be completed (i.e. there is no data in Column C) how do I not count those? The answer to this question goes into F4.
There will be about 6 of these spreadsheets, and I intend to link all worksheet data into a "master" spreadsheet which automatically updates whenever it is opened. The separate spreadsheets are stored in a document management system rather than a network drive so I can't state a filepath.
I am having an issue filtering data in a spreadsheet:
Each set of information has 5 lines of information (title, information, manager, status, sponsor) and the first column of each data set is a merged 5 row box with the area of operation (this does not have to be merged if this is creating the issue). I need to be able to filter by area of operation and have all 5 rows showing. Right now, Excel only shows me one row for each set of data with the area of operation as one row.
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table  ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012Â 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
View 6 Replies View RelatedI'm trying to make a simple chart, which maps the value of an investment fund over time. I wanted to use the new 'Table' feature within Excel 2010 to format and maintain the formulae within the Table, and the 'Header' for the table contains the date, which is not at regular intervals.
If I opt not to use the Table feature, I can create a line-chart with ease, and Excel recognises that the Dates are indeed dates and plots the graph correctly. The minute I convert over to a Table, the Date headers are no longer recognised as dates, and are instead plotted as if they were text, at regular intervals.
I've tried multiplying the Date Headers by 1 to force them back to true Dates, but this still does not work. I've also changed the setting on the horizontal axis to Date axis rather than automatic, but still no joy.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them.
note some are on the left and some on the right.
I am in strange situation where I have a data with Invoice Dates. These dates are in Text. However, when I convert it into reall excel dates. For some reason the dates do not come right. convert my text dates into excel real dates. I did a lot of google search and apply these three methods but all of these gave me strange result I was not expecting. These are the methods I used and the result of each method.
Method 1 : Using Text to Column Wizard (Excel 2007)
I highlighted invoice column and went into text to column wizard. I clikced on Date button, and selected MDY format. Strangely enough, my result was day, month and year i.e. DMY which does not seem right.
Then I press Control ~ on this data as shown in second view.
Inv DateMDY09/22/1122/09/201108/31/1131/08/201108/31/1131/08/201108/31/1131/08/201108/31/1131/08/2011
control ~ (overview)
Inv DateMDY09/22/114080808/31/114078608/31/114078608/31/114078608/31/1140786
2nd Method - Using formula to convert text date to real dates When I used formula, I get the following result. As you can see, formula is converting text dates into different system dates than the first method.Further strange things is when I take these system dates i.e. 4283 and in 2007 excel format use "Short Date" the same system date gets converted into wrong year as shown in the second view.
Inv DateFormulaFormula Result09/22/11=DATE(MID(B2,7,2),MID(B2,1,2),MID(B2,4,2))428308/31/11=DATE(MID(B3,7,2),MID(B3,1,2),MID(B3,4,2))426108/31/11=DATE(MID(B4,7,2),MID(B4,1,2),MID(B4,4,2))426108/31/11=DATE(MID(B5,7,2),MID(B5,1,2),MID(B5,4,2))426108/31/11=DATE(MID(B6,7,2),MID(B6,1,2),MID(B6,4,2))426108/31/11=DATE(MID(B7,7,2),MID(B7,1,2),MID(B7,4,2))4261
2nd view - system dates are getting converted into 1911
Inv DateFormulaFormula Result09/22/11428322/09/191108/31/11426131/08/191108/31/11426131/08/191108/31/11426131/08/191108/31/11426131/08/191108/31/11426131/08/1911
Similarly, I tried other methods or copying blanks etch but none seems to convert text dates into real (system dates).
Here is my set up:
A2 to BF2 is a range of dates
A3 to BF3 are sales. Days without sales are 0.00
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
Hi Guys, This has been bugging me for a bit now and I just can't sus it...
I have a sample perpetual calender that I have been modifying to fit my own purpose. The calender part works fine.
I have beside that a column for holidays, etc and then a another column for other events.
When I put the date in the holiday or events columns I would like the date to be highlighted in the calender above (different colour depending on which column it came from).
The formula I have been playing with (no success) is:
=MATCH(DATE($R$2,1,C8),$I$41:$I$65,0) - This is the Formula for the 1st column of dates.
The 2nd formula is similar, just changes the column it tries to draw the MATCH(DATE.... from...
Although this formula works fine on the sample spreadsheet. When I enter the formula on my sheet, it doesn't seem to work...
I have attached the spread sheet that I am working on.
there are a multitude of issues with US date formats when you're not in the US but I've run across one that I can't figure out.
I have a source table that has approx 5000 lines on it, everything looks correct and all the dates are in the correct (Australian) format. However when I use it to make a pivot table, any dates that are before the 12/m/yyyy gets changed to the mmddyyyy format in the pivot table only, all the source dates are still correct.
I have a spreadsheet with Row 1 as the header and Row 2 as sub-headers. I want to filter automatically to 2nd row, but whenever I press on Ctrl+Shift+L, I have the first column filtered. I have another spreadsheet that whenever I press Ctrl+Shift+L, it automatically filters the 2nd row instead. I'm not pretty sure what's the difference. I have my spreadsheet frozen on cell B3 (not sure if it has something to do with freezing cells. I know I can select 2nd row before pressing on Ctrl+Shift+L, but is there some other way to have this automated?
View 2 Replies View RelatedI would like to know whether it's possible to evaluate the percentage of a text value ie 'Approved', after filters on other columns have been done.
AREA YR DECISION
HN 09 APPROVED
NYM 08 REFUSED
RC 09 APPROVED
HN 09
RC 08 REFUSED
? %
So if I filter by AREA and/or YR, I would like the % of how many were 'Approved' in that filtered range (ignoring any blank cells in the DECISION column).
So far I have a basic
=TEXT(COUNTIF(C2:C6,"*Approved*")/ROWS(C2:C6),"0% ""Approval Rate""")
but it doesn't work once I filter by AREA or YR, and doesn't ignore blanks.
I'm quite newbie for VBA for excel, my friend asked me a favor to filter the data on his excel, so when he enter some keyword, the table would sorted (only show the row that have that keyword), and if possible that he enter it few keyword.
keyword example VB, oracle
table example ....
I have an excel with the following information
A1 - Is a dropdown which will have names of the systems (EAI,Mediation,CDF
..,All)
Row2 will be header which will have following data
B2 - Project Id
C2 - System ID
D2 - Project name
E2 - Project Phase
F2 - Status
from g2 to GN2 there are about 60 resources names entered
From C3 to F3 the data wil be entered and appropriately a chk mark will be
made to the corresponding resource wroking on that project
Say i have about 10 systems provided as dropdown for entering data in A1
(Ex: EAI, MEdiation, .....)
There are resources working for each system
when i apply filtering on a system name i shoud be able
to show only those resources working for that system and all others should be
hidden
Also under the "system" dropdown i will have an option "All", when "All"
option is selected i should be able to see all the data for all the systems.
EX: if i take system "EAI" and if the resources working for eai are there in
AO2 to AX2 then i want the resources from AX2 onwards and before AO2
not to be shown.
If i take a system "Mediation" and if its resources are from Z2 to AI2
then i want resources before Z2 and after AI2 notto be shown.
If "All" option is chosen then i should be able to see the whole sheet
with all the data for all the systems and all resources.
I have a filter that works in Excel 2007, and I'm trying to figureout how to make it work in Excel 2003. OrderNums is an array of multiple criteria. The below code works perfectly in Excel 2007.
View 3 Replies View RelatedI've filtered my data - such as selecting a date range - and then run the pivot, but the pivot ignores the filter and gives me data for all the dates. my workaround is to copy and paste the filtered data to a new sheet and run the pivot off that sheet. This works fine, but maybe I can avoid this step?
View 1 Replies View RelatedI have a worksheet with data in named tables on several sheets. Each of these tables has a column called "filter" (this is not always the same column number between sheets). The values in this column are either 0 or 1, depending on if that particular row is relevant under the book's current selections.
I'm trying to figure out the code that will take a table and filter it to show only the rows which have a 1 under the "filter" column.
I have added below code in module to get list of parts which are not delievered.
I am trying get code which will end the macro as soon as its do not find mentioned crieteria i.e.
("Not Delievered")
Selection.AutoFilter
ActiveSheet.Range("$B$1:$B$5").AutoFilter Field:=1, Criteria1:="Not Delievered"
I have a sumif function in a cell which adds values from a table from another sheet. When I apply a filter in the table, the sumif still includes the invisible rows. Is there a simple way to add only the visible rows with a function based on a criteria like with the sumif. i.e. after certain rows are not visible, still a further slection has to be made base don another cell in the same row.
View 2 Replies View RelatedI have a worksheet with about 1000 entries and I have this is column F so it can sort out all Euston entries into 1 block. =IF(E1="EUSTON",0,1) What I need to do also if it is possible all entries in column B end in even no's it sorts it out into the block that Euston is in and if their odd no's they go into the other block. Dont know if I can add to this or need something else.
View 9 Replies View Relatedto dynamically filter a list as shown below
View 9 Replies View RelatedI have a list of addresses (including street numbers and names), but want to select out addresses that match another list of street names only. I have only used vlookup before, but because one list included street numbers as well, I can't find exact matches.
I am using excell 2007.
I've been trying to write code to filter a list of date base on day of week (Mon, Tue, etc)
My problem is that i can't find a way to code the filter criteria... since the date does not contain any week of day constant. i don't want to create another column in my sheet to show the week of day constant and filter this instead.
Here's my not yet finished code...
Sub DayOfWeek()
Dim sAnswer As String
Dim bWkDay As Byte
Dim loMyData As Range
Dim iFilterCriteria As Integer
Dim Dateserial As Integer
Application.ScreenUpdating = False
sAnswer = InputBox("Please select day to display data (first 3 letter of the day, eg. mon)", Title:="Select day to display")
in the table i have
A1-apples
A2-bananas
A3-eggs
A4-balls
A5-bananas
A6-apples
A7-apples
I need one list that will show me all items that are on list so i would get:
A50-apples
a51-bananas
a52-eggs
a53-balls
to simpilfy this list would show me what types are there in the first list
