I have a spreadsheet with 3 columns: Name, Number and percentage. I need a formula to return the name that has the percentage and the 2nd highest percentage. the spreadsheet has 5 rows, not including the columns labels.
View 2 RepliesI have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
I have two lists of email addresses in columns and I need to find the matches between columns and have those addresses returned to perhaps a third column.
View 2 Replies View RelatedI have a list of values in a column. In that column, I want to find 50 possible matches. Is this possible in Excel? In the column there are multiple strings of text.
After it finds these 50 potential matches, the formula should return a value next to the cell where it matched. PLEASE HELP IF THIS POSSIBLE.
I'm looking for a macro to basically produce me a list of shop names on one sheet with their appropriate sales information. Bascially, i have 4 sheets one for each week of the month, with all the sales info for various shops. Each sheet will list the same shop about 10 times as they make numerous transactions so each one is listed. The list on each of the 4 sheets can be any length and will change week to week depending on how many sales there are.
What i want is to find shops that appear in more than one week and have then appear on a list on a 5th sheet, i.e. my good performers sheet!
I am trying to match words in two separate columns that are not exact matches. any formulas or codes I can write to do this.Below is an example.
Column A
3m Corporation
Apple Inc
Allstate Corp
State Farm
In the attached sample work book Col E has text that I want to check if it is also in Col G and return Yes or No into Col F
View 4 Replies View RelatedI want to vlookup from sheet2 cell E2 to find all matches in sheet1 in coulmn G and add totals together in coulmn E. The match I am looking for is used in several rows of coulmn G on sheet1. I only want cell E2 on sheet2 to give me total amount from data in coulmn E of sheet1 when a match is found in coulmn G of sheet1.
View 9 Replies View RelatedThe objective of the code is to determine if a value in Column A exists:
- If it does, then copy data from a different worksheet into the row of the worksheet where the value resides
- if it doesnt, then go to the last used row in Column A and add then copy data from a different worksheet into the new row
The portion of the code im having trouble with involves the Finding of the value in Column A, and also the error handling when it doesnt find it.
The code below doesn't handle the error correctly.. for the data set im running the code on, it should find a value in Column A (which it does) but then it also runs the ErrHandler portion..which shouldnt happen.. it should only run the ErrHandler portion if it cant find the value in Column A (which therefore means a new record is required)
Sub UpdateRecords()
Dim fitem As String
Dim nmax As Integer
Dim nRow As Integer
Dim rFoundCell As Range
nRow = 10
nmax = Sheets("Availability").Range("schedulechange").Rows.count
Do While nRow <= nmax ....................
I am looking to create a code that searchs a column to see if there is word similar to the input (As in it's the same part name with a missing or extra letter or a space), and then return the first matched word.
View 6 Replies View RelatedI've just started with VBA and are trying to figure out following:
I'm using a validation list where the user choose one of twelve alternatives. The option she or he made is found in one or more rows in column B. If there is a match between the alternative in the validation list and in column B I want to copy some of the cells in the same row as the match in column B (to be exact, I want to copy the cells in column E, J, N and P) to another sheet.
I've succeeded doing this with one row but I don't know how to do without using that same code over and over again until Excel has made it trough all the rows. And there is over 200 of them.
I am trying to use =MATCH to find a value in one column that matches a cell. The cell contains a formula and I want to match to the result.
At the moment it isn't working.
Here's what I have:
=MATCH(G2,$A$2:$A$2189,0)
where G2 is
=K2&L2
Lets see if I can put this into words.
I am trying to find matches of a specific cell in various columns. Example:
Header 1 -------Header 2----------Header 3
-ABC123-----------abc123--------------abd123
-abd123-----------hjk321---------------hdn234
-Abc123-----------dsd123--------------sds332
If I searched for the value "abc123" I want it to return Headers 1 and 2 in a seperate column. It would not matter if the same value is in one column multiple times
So the results would show me the Column Heading for anything that reads: "abc123", "ABC123", "AbC123", "aBC123"
Is this possible?
I have another challenging solve for a VBA macro. So here it goes, as I have become frustrated trying to make an array formula with no joy. On my sample worksheet provided below this is what I am trying to accomplish:
(Solution cells) B4:I4 looks to the (Combination cells) M5:R10 for a match
If a match is present then cell J4 gives a "win" ,
If no match then cell J4 gives a " lose ".
Next if a win is present in cell J4, then cell K4 looks for when the draw number that matches occurred on from cells A4:A10, then subtracts the two(e.g. solutions cells from combination cells) to give the actual " # of draws to a win ". If no win is present in cell J4, then the default is zero for cell K4
The formula would be copied down thru cells J4:K12
Please refer to sample worksheet attached so that you can understand more clearly of just what I'm trying to do.
I have a workbook that contains 3 sheets. What i am looking to do is:
1. Use the names in Sheet 1 (Column A) and find the names on Sheet 2(Column E).
2. If there is a match, put the whole row that contains the match on Sheet 3
In my workbook I have two tabs, the first tab is intended to call on data located on the second tab so I can evaluate & Display it in different ways. Here's what's worked so far. Where I'm stuck is attempts to try and combine the two.
- the second tab is named AW_Items_Import
Examples:
1) Looking on the second tab to count the number of times a object (identified on the first tab in Cell B13) appears
=COUNTIF(AW_Items_Import!J:J,B13)
2) Looking on the second tab for items that fall within a set value range, the ranges specified on the first tab in cells C14 and E14
=COUNTIF(AW_Items_Import!G:G,">=" & C14) - COUNTIF(AW_Items_Import!G:G,">" & E14)
What I want to do, is combine 1) and 2) so I can isolate a search to a name specified on the first tab, THEN count the number of times that item falls within a set range, the range also specified on the first tab.
I've got a sheet here with a master list of document numbers in Column A and a smaller subset in column C. I need to do is for Excel to scan column A for cell C1 and when it finds it in column A i need it to return the corresponding value in B column into cell D1. I need to do this for all column C.
View 2 Replies View RelatedI have a set of worksheets all of which are identical and covered by first:last sheets
What I am trying to do is come to up with a minimum figure for cell G30
With the proviso that it is a minimum of 30 as some of the entries in G30 are less than that figure.
=MIN(first:last!G30) is not the answer as it gives an answer of zero.
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
I want to find the number within this webpage and report it to a Cell in excel....
View 6 Replies View RelatedI have a query where I am trying to find out how many people passed in green, amber and red from a series of data. I know (from the attached file) how to find out how many greens, ambers and reds there were, but how can I find out how many of the 7 in cell B12 passed in Green?
View 2 Replies View RelatedI am trying to write a code enabling some calculations. As part of this code I want to find an integer in an excel range. I set the variable (integer) as Rvalue and wrote the following:
Selection.Find(Rvalue).Activate
which works fine as long as the find is successful. The issue I have however is when the variable cannot be found. I tried using the "iserror" function in vba but it appears that excel/vba does not recognise this issue as an error; I could use an excel formula (i.e. if(iserror(vlookup...) but I would prefer to find out how to handle the issue in vba.
I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK
View 3 Replies View RelatedIn my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":
1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List
2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List
3.) Report In Column D: Identify and return all unique values in "Column C" as a List.
Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"
I am trying to perform an SQL query on an Excel worksheet, as per one of the examples in Michael Alexander's book "Excel and Access Integration: With Microsoft Office 2007" and I am encountering an error message.
Could not find installable ISAM
To clear I am trying to pull data from one Excel workbook to another using SQL.
I am using Excel Excel 2010 64 bit.
This is the code I am running.
Code:
Sub GetData_From_Excel_Sheet()
Dim MyConnect As String
Dim MyRecordset As ADODB.Recordset
[Code]....
I have some across a few times that relates specifically to Excel 2010 64 bit is that I need to install the following driver
Microsoft Access Database Engine 2010 Redistributable
However I already have this driver (I installed when I was trying to figure out how to write from Excel to Access).
Why am I receiving this message. It occurs when my code reaches this line:
Code:
MyRecordset.Open MySQL, MyConnect, adOpenStatic, adLockReadOnly
I am working on large sets of data (more than 50,000 rows of data). I have two sets of data. Set 1 and Set 2 (master data) on the same worksheet. Both the sets of data have three columns each. I am using EXCEL 2007. I was able to accomplish step 1 below.. but I am totally lost with step 2 since i have an additional criteria for the "year".
I have attached the excel sheet as well. This is what I am trying to accomplish:
1) I want to find exact matches in set 1 and set 2 and highlight it or do something to show that a match was found. The challenge is the data in set 1 can occur anywhere in set 2.
2) Add to the complication .. my criteria for matching the year is different. If the Set 1 "year" is equal to or greater by 1 yr or greater by 2 yr when compared to Set 2 "year", I want to treat it as a "match".
For example, from the data attached:
Set 1 data in row 4 is: ATLANTIC ABSECON 2004
Set 2 data in row 3 is: ATLANTIC ABSECON 2003
I want to treat these two data as "MATCH" since ATLANTIC matches ATLANTIC, ABSECON matches ABSECON and according to one of my criteria for year, Set 1 "year" is greater by 1 yr than the Set 2 "year".
I have a page of data that i need to summarise/calculate, i thought sumif would be the correct formulae but i can't get it to work...
Sheet 1 - Data Recomds Emp Name, Weeks 1-52 showing no of hours to adj
Name
WK1
WK2
Wk3
WK4
WK5
WK6
Oliver
-1.5
[Code] .....
Sheet 2 - Summary by month - to Calculate the no of hours for the period per employee
Name
Month 1
Avery
Require Sum for employee Avery Wk 1-4
[Code] ..........
I need a formula that will do this:
for all rows where data in column A matches, does data in column c & f also match? If it does, then put a 1 in column n; if it doesn't, put a 0 in column n
In the attached excel sheet see the sample example tables 1.1.1 and 1.1.2. I have to use it for official purpose and my manger has given this task to complete it. I cannot even compare the forumlas and make it same for all the tables available.
How can I attach the excel file...
I have a reference vertical table which can be up to 30 long (I just put 5 here to keep it simple):
Sheet 1
A
B
1
[Code].....
And I want to return the data in the B column depending on whether the data matches either of the words in the corresponding A column.
E.g. Sheet 2
C
D
10
laki
The formula in this cell would return B1 because C10 = A1
11
katla
The formula in this cell would return B4 because C11 = A4