Find Rows Containing Data And Copy To Next Blank Row?
Apr 21, 2013
In table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A
Hiddenrow with formula
B
C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.
I need to loop through data when it finds a blank it need to delete that row and 15 rows down and loop through whole data set find blank row and delete 15 rows down.
It's been years since I did any VBA, and I forgot. Do I need to use offset to acheive this task?
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example: Raw Data (Snap): Bank Field 1 Field 2 Field 3
JPM 123 456 789
[Code] .....
Output (After Macro): Bank Field 1 Field 2 Field 3
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12. On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1 2. Copy the entire row containing the non-blank values 3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown) Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown")) If totalRows = 4 Then ActiveCell.Offset(1, 0).Range("A1").Select Selection.Cut ActiveCell.Offset(-1, 1).Range("A1").Select ActiveSheet.Paste etc.
I have a worksheet with macros which generates data after a number of blank rows (the number of blank rows is never the same). I want to copy the data rows to another worksheet without the beginning rows being blank. I am not sure of the best way to do this and if it can be done with a macro in the new worksheet. At the moment I do a manual copy and paste.
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
I have data in column A separated by blank rows. I want to copy ranges between two blank rows, and paste it to sheet named "mega" so that each range is in its own column.This is code I'm working now.
Code:
Sub QuickSet2() Dim rng1 As Range On Error Resume Next Set rng1 = Cells.SpecialCells(xlCellTypeConstants).EntireRow On Error GoTo 0 If Not rng1 Is Nothing Then rng1.Copy Sheets("mega").Range("A1").End(xlRight).Offset(0, 1).Paste Else MsgBox "No constants found" End If End Sub
I have 21 (20 data sheets + 1 result sheet) excel worksheets. A5:E5 is the starting row of values. I want to copy down all the possible rows with values until the row is blank (.xlDown) and paste in Sheet21, A2 onwards.
The problem is each of these 20 sheets have different number of rows of values (say 1 has 10 rows, 2 has 23 rows etc.,). I want to copy A5:E15 in Sheet1 and paste in A2:E11 in Sheet21 and copy A5:E28 in Sheet2 and paste in A12:E35 in Sheet21 and so on.
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
What I have are invoices that span an entire month that I need to convert into a format for the billing department. The columns I have right now are: "Invoice Number"Cost CenterAccountFundType of Service" Date of Completion"Unit PriceQty Total Price
I need to generate a file with the headings as: Cost CenterFund"Date of Completion"Account Total Price. Since Total Price only appears on the rows that have the final information I need, I want to have a script that grabs every line in which the Total Price column has data, generate a file of the summary lines, then throw that through another macro to reformat it into the final format, or just do it in one step. In summary I need to grab rows where Column I is not empty, whats the best way to do this?
I have a master list of Players on one sheet B2:B72 and in E2:E72 is a column called Playing and in it is "y" or "n". I need to make a list of the Players that are Playing on another sheet without blank rows (I can do it but it leaves blank rows for the Players that have a "n" from column B. I am using 2003
Here is the formula I am using now: =IF(Players!$E3="y",Players!$B3, " ") but I get blank rows for the player that are not playing.
Can a macro make a workbook everytime you copy, it will paste special formulas only and skip blank rows? And can I still let me select the range manually? I would like to use this to link workbooks.
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY CODE TO INSERT 1 ROW Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
Need a VBA macro that is similar to the subtotals function but without the subtotals? Basically I want the macro to look at column A and say, for each change in column A insert a blank row… I don’t need to worry about the sorting, I just would like to know how I can tell a spreadsheet to look at a column find changes in that column and just insert a blank row. On the second page of the attached spreadsheet is an example of the desired output… I will probably use this for many different spreadsheets so the simpler and more versatile the better, ie I can change the column I want the macro to look at.
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
I have a lot of rows of data all divided with an empty row and if they are 6 or less all rows need to be entirely deleted any 7 or above need to be kept.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry A B C D E 1X 2X 3X 4 5X
Second Entry A B C D E 1XY 2XY 3XY 4Y 5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
I have a macro that will take 4 cells of data from a source and put in the next blank row starting with C9:F9 of Worksheet “NORTH”, then the next blank row and so on. I also have another macro that does the same function but puts data in Worksheet “SOUTH”.
In the event of an error where I select the wrong macro putting data in the wrong Worksheet, I would like to have a macro that would swap the data into the correct Worksheet and then clears it from the wrong Worksheet.
Example: Macro1 has written 4 cells of data to next blank row in C:F in Worksheet “NORTH”(Say C10:F10) which was wrong choice. I need a macro that captures the last row that has data in it (non-blank) which is C10:F10 of Worksheet “NORTH” and then copies that data to the next blank row of Worksheet “SOUTH” C:F, (say C15:F15) THEN clears the data from Worksheet “NORTH” that it just copied from the last non-blank row which was C10:F10. Essentially swapped and reset.
I have a spreadsheet that has 4 columns and column D has some blanks randomly down the sheet. How can I delete any and all rows that have a blank in column D?
I have been tinkering with a code for a few days now and managed to finally get it working . The Code basically copies data from one spreadsheet (Macro Tester6), opens up another spreadsheet (Macro Tester Master), pastes the data, Saves the file (Macro Tester Master) and then closes it.
The Macro Tester6 file is then left open as I prefer.
The problem I have is that the data always paste into the same row, hence overwrites data already inserted.
the code finds the next blank row to paste the data in.
My code is:
Private Sub CommandButton1_Click() ' select current workbook and paste the values starting at A1 Windows("Macro Tester6.xls").Activate Sheets("Sheet1").Select Sheets("Sheet1").Range("A1:I1").Select Selection.COPY ' open the source workbook and select the source sheet
I would like to know how can i insert a blank row in between ACC# when ever a new series of data begins
name Acc # Balance Date John 2222 200 june 2013 John 2222 344 june 2013 John 2222 700 Sept 2013 Silva 4444 333 June 2013 Silva 4444 333 June 2013 Silva 4444 333 June 2013 Raff 5555 897 June 2015 Raff 5555 897 June 2015 Raff 5555 897 June 2015 Raff 5555 897 June 2015
