Index Match lookup formula does not find valid entries that exist in the lookup table. Formula: =INDEX(tbl_Costs,MATCH( F8,tbl_Costs_PN,0),MATCH("Cost",tbl_Costs_hdngs,0)). I've verified that the matching criteria and values are, in fact, in the table and have made double sure that all cells are formatted the same. the attached file and show me the error of my ways.
View 7 RepliesI have scoured the Excel boards but cannot find what I am looking for. Need to do a formula approach (No Pivot Table) lookup on a dynamic table that is not necessarily in order and may have blanks in some cells or whole rows. What I would like Excel 2003 to do is report (extract) the all first occurrences of each organization number that has at least one person with a "Yes" in a corresponding column in the same row. I also need the number of persons that have "Yeses" in each of those identified Org Nos .
Data is laid out as such:
Org No. Name Not in Compliance
8631Steve Yes
8631David
8631Nick
8631Tom
8631Susan Yes
8701Peter Yes
8701Diane Yes
8701Mary Yes
8879Don
8879Bernie
8879Wayne
8900David Yes
The answer is
In one row list the org #'s not in compliance ("Yes"). In the row just below it the number of persons:
86318701 8900
2 3 1
I have a helper column that counts the number of unique org nos, but cannot tie that to those that have Yes in the other column.
In column before Org No i have =IF(COUNTIF(b$33:b34,b34)=1,MAX(a$33:a33)+1,"") copied down.
Given three criteria (category, name and date) I want to find the specific value within the table or array. refer to attachment.
View 4 Replies View RelatedI am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies View RelatedI'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
mockup.xlsxStarting out with a 9 by 11 grid.
Column A will have times that need to be referenced in a lookup. (Ex Sat 8:00am)
Row 1 will have basball field codes reference with a lookup. (Example Field 4
Cells B2:I11 have distinct codes or possibly nothing. (An example would be: Tier 1 A1-A3)
These codes will move around from time to time. They will always remain distinct within the grid, but could appear in any of the cells from B2:I11.
I have 2 columns I want to populate with values from the grid.
First is Fields. I want the first cell to populate with the baseball field found in row 1 of which the code Tier1 A1-A3 falls under.
For example if this season Tier1 A1-A3 is found in the column under Field 4, then I need to return Field 4 as a result.
Second is the time. I want the time to be populated based on what row the Tier1 A1-A3 code falls in.
For example if Tier1 A1-A3 is in the Sat 8:00am row, then I need that value returned.
In short, I need to search the grid and find a given value. I then need to use a lookup (or other tool) to return the first value in that row. And secondly via lookup return the first value in that column.
edit: added spreadsheet example. First sheet is grid in question, 2nd sheet is a typical schedule.
The first Team (Scared Hitless) is A1, the team they play first is Sands Duel Fuel (A3) They play at 11:00am on Field TR3.
You will see on the grid under TR3 and Sat 11:00 the code Tier 4 A1v3. This code is what I want to search and correlate into times on the schedule rather than doing the data entry by hand.
Im trying to lookup the first unique number in a column in a separate workbook and then return the value then the cell below would lookup the next unique number and return the value
91010111112121313700
700
700
7009929921442144218341834185018501892189219181918333433343400
3400
3400
3400347634763534
I've been searching both here and on google but I've been unable to make use of any of the numerous suggestions and examples I've found to do this; given I'm right in thinking that this should be done with a vlookup!
I have a table in which different customers pay different prices for different products. C13 is a cell in which I want Excel to look up the correct value based on A13 and B13 (in this case C3).
I have no experience with lookup functions, which might be the reason why I can't get this to work. I bet it's pretty simple
I am trying to come up with a user defined function to accomplish several things at once.
First, I need to lookup a reference value in one column and determine the value from another column (on the same worksheet) in the same row. Then, concatenate each "return" value (that isn't blank).
I have the following code so far, but my formula results in a zero. If I remove the On Error Resume Next, the formula results in a #VALUE error.
Public Function ConcatUnique(Separator As String, Ref As Variant, LkupCol As Range, _
RetCol As Range)
Dim lkup As Range
Dim ret As Range
Dim colDif As Long
Dim mCollect As New Collection
Dim i As Integer
Dim b As Variant
' Determine the number of columns difference between
' the lookup column and the return value column.
colDif = RetCol.Column - LkupCol.Column
On Error Resume Next
' Determine which lookup values in the lookup range match the reference value.
' When the lookup value matches the reference value, set the return range object
' to the cell in the return range (column) in the same row as the lookup value.
' Note we use the difference between the lookup column and the return column to
' determine the location of the return range object.
For Each lkup In LkupCol
If lkup.Value = Ref.Value Then Set ret = Range(Cells(lkup.Row, lkup.Column _
+ colDif))
' Store the return value in the collection object. Ignore any blank return
' values. Note we use the range value converted to a string as the key
' value.
If ret.Value <> "" Then mCollect.Add ret.Value, CStr(ret.Value)
' Loop through each cell in the lookup column range.
Next lkup
' Write each item from the collection and the separator to the final result,
' writing each value and the separator after the previous value and separator.
For i = 1 To mCollect.Count
b = b & mCollect(i) & Separator
Next i
ConcatUnique = Left$(b, Len(b) - Len(Separator))
End Function
I need to place a lookup table in a work book and I'm not sure how to do it.Below is what I specifically need in my workbook.
c. The workbook will need a lookup table that will lookup the tuition, clothing
and entertainment figures depending on the selection of college, and will
ensure that only the colleges on the list are selectable. That is, the
worksheet will not allow the user to enter another college not in the list.
The lookup list must be on a worksheet by itself at the end of the workbook.
I am looking for a solution other than using an advanced data filter for unique records only.
I would like to take a large list (columns A:D), and automatically filter for unique records and other conditions and paste the results in different tables (Group A & Group B).
Group A only includes records with value ="A" in the checksheet column.
Group B includes records with value <>"A" in the checksheet column.
Does anyone have any ideas how to do this so that when I paste the large list in columns A:D, the other tables (Group A & Group B) are automatically populated?
SEE ATTACHED:
product1
product1
product3
product7
product1
product7
product3
I want to do a lookup and return to a new list just the unique entries, such as this:
product1
product3
product7
I have it working now using a pivot table to get me the unique items, but there must a be a more efficient function to do this.
I am attempting to do a search on a 2 dimensional table, based on Product Code/Month. Is there a function, addin or a macro that will allow me to do this? All I can come up with is a messy combination of VLOOKUP/HLOOKUP/COLUMN.
View 2 Replies View RelatedI'm looking for a formula (VBA I'm assuming) that will help me create a unique customer ID out of data that my website generates in order to import records into my accounting system.
I have a current list of customers in CSV format with the columns: CustomerID, CustomerName, CustomerZip
Each customer in our accounting system is assigned a unique,7 digit CustomerID in the format of XXX#### where XXX are the first 3 letters of their last name, and #### is a 4 digit number (with leading 0's) to create unique ID's for customer with the same first 3 characters of their last name. SAMPLE LIST:
SCH0001, Lindsey Schubert, 75230
SCH0002, Thomas Schoembs, 53132
ADA0001, Samantha Adams, 28205
...
What I'd like to do is pass the formula 3 parameters (Cust_First_Name, Cust_Last_Name, Zip) and have it parse the .CSV file and either return an existing customer's current ID or generate the appropriate new, unique ID, making sure in increase the 4 digit # accordingly and insert leading 0's if necessary.
Another caveat, if possible to work with, is the ability to also pass the formula another range of cells to append to the end of the .CSV file's data for comparison reasons. There are times when I'll bulk-import orders (or we receive numerous in the same batch) and the potential exists to have two customers that would have the same CustomerID created using JUST the .CSV data. Ie. If we use the example above and have new customers of Steve Schwab and Julie Schwitzer - we'd end up incorrectly assigning them both SCH0003, where if we'd read Steve Schwab's newly created info and customer ID of SCH0003, then Schwitzer would correctly be assigned SCH0004.
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedI have a worksheet (say, Sheet1) that I am going to manually import a large data set into on a weekly basis for reporting purposes. One of the columns from this data dump will have the header "Design Id" in the first row, but it may not be in the same column every time. I am trying to figure out how to create dropdown lists on a separate worksheet (say, Sheet2) in the same workbook where the data source always looks up the column containing the header "Design Id" from Sheet1 and then returns only the unique values from that column as options in the list.
View 1 Replies View RelatedIn column CT between rows 11:210 is the vertical data that includes duplicates. I am looking to create a formula that can lookup each value between CT11:CT210 and return only the unique values horizontally starting in cell CW9 and onwards.
Example: CT11:CT14 looks like
5x20
6x4
5x20
5x8
and so on and so forth..
I would then like this formula to return the above data (which goes all the way to CT210) in this format starting in cell CW9 - 5x20 then CX9 - 6x4 and finally CY9 - 5x8.
I get a file every day that contains online orders for a client. They have made the state and country fields on the order form free text, so sometimes the State field has CA, sometimes California, sometimes even Cal or Cali. Oregon may be represented as OR, Oregon, or Ore (and one time even Orygon.)
The country field may have US, USA, United States and sometimes United States of America.
Well, they need this data imported to their system with the states fully spelled out: Oregon, California. And the country spelled out as well: United States, Canada.
Right now I have a lookup tables worksheet that I just have a macro run a vlookup on. But I'd like to know if there is a way I could just put it all in the code, without the external tables.
i.e. some code that, in English, would basically say, "If the value of any cell in column K is among these values, replace it with those values, otherwise just leave it as it is". Could I do that while containing the two sets of values right in the code rather than on a worksheet?
I really just want to replace the standard abbreviated state/country codes with the full text, and if the value does contain Cali or Ore, let them manually make the change. Hopefully that will finally nudge them to just make the online order form utilize a drop-down list of states and countries, rather than free text.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
It is a sample of my table to operate on: excel.jpg
My task is to make a list of mobile phone brand and model name – success, fail, reject, keeping in mind that one particular phone could have been contacted several time during the time of the campaign, but it should appear counted in all stats only once (hint: track phones by their unique Bluetooth code).
I have a list in D2:H2 with values {A,A,B,C,D} how can I get the 3rd unique value in this list?
the formula should output C. I have been trying this for a while.
I am trying to populate a tab with all the unique values from a data table. For example, list all the SKUs, SKU Names, Buying Groups, etc. for "Owl Filled Candles" on the "COLLECTION - SKU" tab. For reference, the "VENDOR - SKU" tab works perfectly. I want the COLLECTION tab to do the same thing as the VENDOR tab. The only difference is the VENDOR-SKU tab is pulling data based on a Vendor's name in a drop-down list in B3 and the COLLECTION tab is pulling data based on the Collection name in a drop-down list in B3.
I tried to just copy the tab and reset the reference cells but that isn't working.
I am looking for a formula that matches two unique numbers in a table based on two numbers that are entered in two other cells. This will be clearer by looking at the example below and the attached.
The goal is to find the number entered for the home field (cell c2) in the "home" row (B5:K5) with the number entered for the away field (cell c3) in the "away" column (A6:A15) and result in the data element where the row and columns come together. The expected result for this example in the attached would be "JPD".
Another example would be if a 6 was in cell c2 and an 8 was in c3, the expected result would be "RBK". I think this can be done by indexing and matching but my memory has gone blank with how this works.
I am trying to get an Array formula to pull unique values from an ENTIRE table. I was able to write one just for a column but not for an entire table. The unique value column is my desired results - t
View 11 Replies View RelatedI have a Column, say column A, setup with a lot of repeated data. Now what I want is to pick only a single value from each set of data and put them into a separate column. for example:
Col A
1
2
3
2
4
1
5
4
1s
a2
1s
a2
a2
6
What I want the excel to do is to pick from the above data only a unique value and put them into a separate col, like this:
Col C
1
2
3
4
5
1s
a2
6
This is my first post here!
The Question:
This is a hard one, I promise! Is there a way/formula/VBA to return multiple unique values from a table or from multiple columns with criteria?
My Objective
I want to create a table that has unique company names in the first column (done already) and all the connections that belong to a given company in the columns #2....#n. Like this:
Column1 Column2 Column3 ..... Column n
Company X1: Co. ABC Co.XYZ Co.Acme
Company X2: Co. SEB Co. Becme Co. Cecme
....
Company Xn: Co. X1 Co. ABC Co. Acme
I have a small sample that has 20.000 rows and 25 columns of data of 1946 unique companies downloaded from my schools database. This means that doing this by hand would take forever!
The data has many duplicates which makes this complicated. The first column shows company name and columns 2...n present connections. Like this:
Column1 Column2 Column 3 ...... Column n
Company X1: Co. ABC Co. XYZ Co. Acme
Company X1: Co. ABC
Company X1: Co.Acme
Company X1: Co. XyZ Co. ABC
In this example Company X1 is connected to companies ABC, XYZ and Acme. The formula should be able to filter/omit overlapping entries.
I have a list of location names that may be repeated within the list. I also have possible blank cells within the list. I would like to filter them automatically into another table without having to use the autofilter or any macros to keep things simple.
How could i do this by removing blank cells in the new table and having only uniquely listed names ie get rid of any duplicates.
I have a column with serial numbers, i want to go through that column and store all the unique serial numbers and the number of occurrences. then i want to know what is the highest occurrence.
View 9 Replies View Related