Find Value In Range Using Cell Value?
Sep 29, 2011
How do I put a cell value from worksheet into a statement in VB to find a given value in a range?
Example:
Instead of this > Set Foundcell = Sheets("Event Records").Range("a2:a2298").Find("1002") This works, but I want to put in a cell value from a worksheet
I need something like this >
Set Foundcell = Sheets("Event Records").Range("a2:a2298").Find = { (Sheets("BlankForm").Range("R8").Value) }
Or thinking something like this >
Sheets("BlankForm").Select
RecordNbr = Range("R8").Value
Sheets("Event Records").Select
Set Foundcell = Sheets("Event Records").Range("a2:a2298").Find(SetValue=RecordNbr)
View 2 Replies
ADVERTISEMENT
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
May 4, 2009
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
View 7 Replies
View Related
Sep 26, 2013
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
View 7 Replies
View Related
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Nov 19, 2009
complete the following partial code.
I am trying to determine the last cell for Non-ILEC piece and then want to insert one row below the last Non-ILEC cell and insert "Total BS Non-ILEC" and sum "H" Range just like the way its done in the partial code. The partial code I have posted is working perfectly fine with regard to ILEC piece. I need to further add the Non-ILEC piece in the partial code to accomplish my task ....
View 15 Replies
View Related
May 11, 2006
I am trying to find the code for finding the first cell with a value in it for a range. I have seen code for finding the last used cell in a range such as....
i = Range("B65536").End(xlUp).Row
Is there a code that is the opposite of the one shown above?
View 2 Replies
View Related
Jan 25, 2012
Have a range of data with names dotted in different rows and cells.
I want to find a name, the return the number in the cell to the right.
Can use VLOOKUP as names arent always in same column of the range.
View 9 Replies
View Related
Mar 30, 2012
I have a sheet that has six sets of three columns on it. The columns are labels Ball #1, Number Times Drawn, Last Date Came Up. The first five "sets" are the same except the ball # changes from 1 to 2 to 3 to 4 to 5. The last set has columns labeled Mega Ball, Number Times Drawn, Date Last Came Up. Yes I am doing stats analysis on lottery numbers for a project.
What I want to find is the last date drawn for each of the numbers, 1-56, and have it go into the third column of the 3 column sets.
I will use the first column set for example. I have numbers down the first column A numbered from 1 to 56 (In series). In the next column B, I have the number of times drawn for each number, which I have working. In the last column of the set I want to have the Last Date Drawn.
I tried the following function (Formula):
=INDEX(Table1[Date],SUMPRODUCT(MAX((Item=A2)*ROW(Item)))-ROW(Table1[Date])+1)
This kind of worked. It returned a date but it was not correct. It actually said the same date for each number, which I know is wrong. I can't figure out where it is actually pulling that date from.
I should clarify that the drawing numbers are on a second sheet labeled "Mega_Millions_Numbers" in a table named Table1 and the Date column is A with a column label of Date. The table has column headings of Date, Ball#1, Ball#2, etc. through to Mega Ball column.
What I need is a function or formula to pull the last date drawn. I am NOT good in any way shape or form with VBA so if I can do this without VBA it would be best for me. I can follow along with formulas and functions well enough, just not VBA.
I will need to have this formula copied down 56 times per set and there are 5 sets so i will have to modify it for the other columns. (If your keeping track that totals 336 formulas).
View 1 Replies
View Related
Jul 21, 2014
Type/Unit Sold
Car-A/20
Bike-A/5
Bike-B/20
Car-B/50
Car-C/100
Bike-C/100
I need a formula if it's Car then sum it up to 170 and for Bike is 125.
View 9 Replies
View Related
May 5, 2009
I have date in a range from a1 to cw.... this could range to the whole worksheet as it varries.
Now i started to write the macro by inserting three rows at the top of the sheet, no problem, now how do i make cell a5 become the new active cell so that i can freeze pane .
so i really need to do the "find the first non zero length cell in a range" code as I know it will always be a5. this part will not change.
I cant seem to find how to change the active cell from a1 to a5....
View 9 Replies
View Related
Jul 22, 2009
I had a macro to do this but forgot to save before close now i can't find it.
I need to find the next blank cell in range F15:F240 and select it so i can paste data there.
View 9 Replies
View Related
Feb 13, 2007
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 Replies
View Related
Mar 16, 2014
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
View 3 Replies
View Related
Mar 8, 2014
I have a B2:M13 range. I would like to find a way to find the next cell with Interior.ColorIndex = 1.
For example, if position is currently B2 (so myrange(1, 1)) and the next black colored cell is on B6 (so myrange(5, 1)), I would like store 5 and 1 into variables.
So if no black background is found after current cell on the same row, look for next black background on next row.
If current cell is in row-M (the last one ** the range), for example, and there's no black background following on this row, find first black background in row-B.
View 5 Replies
View Related
Dec 9, 2009
I am writing a function that opens up an external excel document, identifies a string in a certain range and then i also want it to return a cell reference for that string including the number of rows beneath the cell that the string was found in.
View 6 Replies
View Related
Nov 14, 2007
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
View 9 Replies
View Related
Oct 27, 2008
I am trying to find a code that will simply find the last cell in Column A of a named Range (titled: ConditionlFormatArea)?
Also IF I could get a line(s) of code that would just find the last cell in Column A of the Used Area.
I ask for both because I am not yet certain which line of code will work best for me.
When I have that cell located I need to Remove the Conditional Formatting. I think I can get the code for that part.
View 9 Replies
View Related
Jan 28, 2007
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
View 3 Replies
View Related
Aug 1, 2008
I'm trying to create a spreadsheet to update daily, whenever our market intelligence arrives by email. I'm not trying to write a macro which can select a range of cells (G:L) relative to the date in Column B, which represents the value in cell P6. In other words:Read the value of cell P6 Find that value in column B (e.g. B646)highlight the cells in columns G through to L on that row (e.g. select G646:L646) I am then aiming to paste the values in that range of cells, so that those stay in the spreadsheet and are not lost when the next lot of figures comes in the following day.
Range("G646:L646").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveWindow.SmallScroll Down:=12
Application.CutCopyMode = False
ActiveWorkbook.Save
but that's obviously a static range, rather than looking up the date first.
View 2 Replies
View Related
Feb 3, 2014
I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.
To explain a little better here is a simplified example of my spread sheet that is in input for the macro.
A
B
C
D
E
1
PART NO.
date in
date out
comp1
comp2[code]......
Column A lists the coponents found on the same row as the seach critria, in this example "12-3".
Column B lists the number of occurances of the components. This search is limited to a date range input by the user.
So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.
*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.
I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.
View 2 Replies
View Related
Jun 18, 2008
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.
View 6 Replies
View Related
Sep 4, 2013
I need a formula to check a range of parts and bring back a value of 0 if matched or the value in another cell if it doesn't match.
Part number H-200-3
Part number H-200-3-A
Part number H-200-3-B
If I enter any of the above part numbers then cell B1 returns 0 if it is a different part number then B1 would need to match cell A1.
View 2 Replies
View Related
Jun 6, 2014
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Oct 18, 2013
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
View 3 Replies
View Related
Feb 4, 2014
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
View 1 Replies
View Related
Sep 23, 2007
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
View 9 Replies
View Related
Oct 10, 2009
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies
View Related
Feb 12, 2010
I have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
View 9 Replies
View Related
